Interfacial adhesion of lignocellulosic materials in polymer composites: an overview

Abstract Cellulosic materials have long been used as cost-cutting fillers in the plastic industry. Among the various factors which determine the final performance of the composite materials depend, to a large extent, on the adhesion between the polymer matrix and the reinforcements, and, therefore, on the quality of the interface. In fact, the majority of cellulosic raw materials are lignocellulosics of different polarity to plastics, and due to this divergent behavior, the adhesion between cellulosic materials and polymer matrices is very poor. However, a sufficient degree of interaction or adhesion between the surface of the cellulosic materials and matrix resin is usually desired to achieve an optimum performance of the end-product. In many cases surface modification of the cellulosics or the matrix resins, using various additives, vinyl monomers, or coupling agents, are considered to be essential to achieve this goal. The present paper surveys research work published in this field with special emphasis on the cellulosic materials' surface chemistry, morphology, as well as interfacial properties of the composites in order to elucidate the role of surface treatments. In order to elucidate the mechanism of interaction on molecular level, it is necessary to employ various techniques, such as spectroscopy that can measure surface events. In fact, the complexity of the interphase region requires a variety of characterization methods for the thorough understanding of the physical and chemical nature of this region. Moreover, a proper combination of different techniques is necessary to provide a true picture of the interphase. Keywords: Composite interfacereinforcementsurface modificationsurface characterizationreview