The defect evolution in shock loaded tantalum single crystals
Source abstract
Abstract
Abstract The defect structures of three different orientation ([001], [011] and [111]) shocked single crystals of tantalum have been characterised using scanning electron microscopy and transmission electron microscopy. The defect evolution and the response of the single crystals are found to be highly dependent on the orientation of the single crystals and the position in the specimen. Crystal plasticity simulation has been used to calculate the strain tensor in the specimens as a function of position and time. The defect types and distributions are analysed in terms of the shock wave and the lateral and back release waves. Twins at the sample centre and front surface were created by the shock wave front. The twins at the back of the sample close to the side surface are produced by the interaction of the release waves. Twinning area fraction and dislocation density are higher at the impact surface region than at the back surface due to decay of the elastic precursor and the difference in loading duration. Twinning acts as a major deformation mechanism and has a strong influence on the Hugoniot elastic limit (HEL) and spall strength when the loading direction is [011] or [111].
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · High-pressure geophysics and materials · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Tantalum and its alloys10.1016/0263-4368(95)94023-R ↗
2. Shear localization and recrystallization in high-strain, high-strain-rate deformation of tantalum10.1016/S0921-5093(96)10847-9 ↗
3. The spall strength and Hugoniot elastic limit of tantalum with various grain size10.1063/1.3686444 ↗
4. Dynamical behavior of tantalum
5. Dynamic material properties of refractory metals: tantalum and tantalum/tungsten alloys
6. Influence of peak pressure and temperature on the structure/property response of shock- loaded Ta and Ta-10W10.1007/BF02669413 ↗
7. Laser compression of nanocrystalline tantalum10.1016/j.actamat.2013.09.016 ↗
8. Shock-induced deformation twinning and omega transformation in tantalum and tantalum–tungsten alloys10.1016/S1359-6454(00)00287-1 ↗
9. On the micromechanisms of shock-induced martensitic transformation in tantalum
10. Effect of strain rate and dislocation density on the twinning behavior in tantalum10.1063/1.4948528 ↗
11. Shock-induced phase transformation in tantalum10.1088/0953-8984/22/38/385702 ↗
12. Analysis of deformation twinning in tantalum single crystals under shock loading conditions10.1063/1.4792227 ↗
13. Laser compression of monocrystalline tantalum10.1016/j.actamat.2012.08.026 ↗
14. Deformation twinning in explosively-driven tantalum10.1016/j.msea.2012.06.071 ↗
15. The onset of twinning in metals: a constitutive description10.1016/S1359-6454(01)00300-7 ↗
16. The effects of shock wave profile shape and shock obliquity on spallation: kinetic and stress-state effects on damage evolution10.1063/1.3294993 ↗
17. Metallographic studies of metals after explosive shock
18. Dynamic deformation of shock prestrained copper10.1016/0921-5093(91)90673-B ↗
19. Computational design of recovery experiments for ductile metals
20. On the shock response of cubic metals10.1063/1.3218758 ↗
21. Materials' physics in extremes: akrology10.1007/s11661-011-0720-1 ↗
22. Velocimetry using heterodyne techniques10.1117/12.567579 ↗
23. Electron channelling contrast imaging of dislocations in a conventional SEM10.1080/14786435.2016.1262971 ↗
24. Loretto · 1975
25. Meyers · 1994
26. 1970
27. Orientation dependence of shock induced dislocations in tantalum single crystals10.1088/1742-6596/522/1/012029 ↗
28. Development of a 3D lagrangian/ALE hydrocode
29. Modeling the microstructural evolution of metallic polycrystalline materials under localization conditions10.1016/j.jmps.2007.03.019 ↗
30. An explicit formulation for multiscale modeling of bcc metals10.1016/j.ijplas.2008.06.003 ↗
31. Elastic-plastic deformation of molybdenum single crystals shocked along [100]10.1063/1.4974475 ↗
32. Shock equation of state properties of concrete
33. Antoun · 2006
34. Ductility: papers presented at a seminar of the american society for metals
35. A theory for ductile fracture by internal necking of cavities
36. The initiation and growth of voids at second phase particles
37. Shock compression of solids10.1016/0370-1573(79)90026-7 ↗
38. Atomic modelling of crack initiation on twin boundaries in α-titanium under external tensile loading along various orientations10.1080/09500839.2014.977365 ↗
39. On the ultimate tensile strength of tantalum10.1016/j.actamat.2016.12.033 ↗
40. Non-equilibrium molecular dynamics simulations of spall in single crystal tantalum10.1063/1.4971594 ↗
41. The importance of shock wave profile in explosive loading experiments10.1016/0001-6160(64)90161-0 ↗
42. Effects of peak pressure, pulse duration, and repeated loading on the residual structure and properties of shock deformed metals and alloys
43. A dislocation model for twinning in f.c.c. metals10.1016/0001-6160(63)90074-9 ↗
44. Asay · 2012
45. Elastic precursor decay in tantalum10.1063/1.1660508 ↗
46. Dislocation dynamics and dynamic yielding10.1063/1.1702940 ↗
47. Rohde · 1973
48. A strain-rate and temperature dependent constitutive model for BCC metals incorporating non-Schmid effects: application to tantalum-tungsten alloys10.1016/j.ijplas.2014.07.007 ↗
49. Shock-induced plasticity in tantalum single crystals: interatomic potentials and large-scale molecular-dynamics simulations10.1103/PhysRevB.88.134101 ↗
50. Hull · 2001