On the high creep strength of the W containing IRIS-TiAl alloy at 850 °C
Source abstract
Abstract
This paper presents a study of the creep at 850°C under 150 MPa of the IRIS alloy (Ti-Al48-W2-B0.1) densified by spark plasma sintering. The dislocation microstructure in a sample strained up to 1.5% was studied by post-mortem transmission electron microscopy. The deformation is mainly due to ordinary dislocations. Several populations of dislocations are evidenced. Their Burgers vectors, the plane in which they are moving and the corresponding deformation mechanisms are determined. In the discussion section, the deformation mechanisms, the factors controlling their activation and the role of tungsten as hardening element are examined.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Appel · 2011
2. The geometry and nature of pinning points of 1/2 (110] unit dislocations in binary TiAl alloys10.1080/01418619708200010 ↗
3. Modeling the flow stress anomaly in gamma TiAl. 1. Experimental observations of dislocation mechanisms10.1080/01418619508244375 ↗
4. An in situ study of ordinary dislocations glide in TiAl alloys10.1080/01418619908210404 ↗
5. Pinning points anchoring ordinary and Shockley dislocations in TiAl alloys10.1016/S1359-6454(98)00233-X ↗
6. Grégori · 1999
7. Peierls friction stresses and dynamic strain ageing in TiAl and Fe30% Al alloys10.1016/S0921-5093(97)00280-3 ↗
8. Dislocation processes during the plastic deformation of gamma-TiAl10.1080/01418619908210346 ↗
9. Positive temperature depence of the yield stress in tial L10 type superlattice intermetallic compound single-crystals at 293-1273K10.1016/0001-6160(85)90245-7 ↗
10. Thermally activated deformation mechanisms in micro-alloyed two-phase titanium aluminide alloys10.1016/S0921-5093(97)00043-9 ↗
11. Microstructure and deformation of two-phase gamma-titanium aluminides10.1016/S0927-796X(97)00018-1 ↗
12. Interpretation of the stress dependence of creep by a mixed climb mechanism in γ-TiAl10.1080/14786430412331284009 ↗
13. On the contribution of climb to high-temperature deformation in single phase gamma –TiAl10.1080/01418619408242511 ↗
14. Temperature dependence of yield stress, deformation mode and deformation structure in single crystals of TiAl (Ti-56 at% Al)10.1080/01418619708205149 ↗
15. Positive temperature dependence of the yield stress in L10-type Ti-Al-V compound10.1016/0956-716X(90)90187-L ↗
16. The influence of niobium, tantalum and zirconium on the microstructure and creep strength of fully lamellar gamma/alpha(2) titanium aluminides10.1016/j.msea.2018.11.152 ↗
17. Relationship between tensile and primary creep properties of near gamma-TiAl intermetallics10.1016/S0966-9795(01)00090-5 ↗
18. Primary creep behavior of Ti-48Al-2W as a function of stress and lamellar morphology10.1007/s11661-003-0281-z ↗
19. Microstructure and creep properties of a cast intermetallic Ti-46al-2w-0.5si alloy for gas turbine applications10.1016/j.msea.2004.05.011 ↗
20. Creep behavior of a cast intermetallic Ti-45.2al-2w-0.6si-0.7b alloy10.1016/j.scriptamat.2003.10.003 ↗
21. Creep of nearly lamellar Tial alloy containing W10.1016/j.scriptamat.2004.05.005 ↗
22. Microstructural stability of γ-based Tial intermetallics containing β phase10.1016/j.intermet.2004.12.005 ↗
23. Strengthening of a fully lamellar Tial plus W alloy by dynamic precipitation of β phase during long-term creep10.1016/j.scriptamat.2005.10.018 ↗
24. Obtaining of a fine near-lamellar microstructure in TiAl alloys by spark plasma sintering10.1016/j.intermet.2016.01.003 ↗
25. Mechanical properties of the IRIS TiAl alloy10.1007/s11661-016-3801-3 ↗
26. Temperature control during spark plasma sintering and application to up-scaling and complex shaping10.1016/j.jmatprotec.2012.09.023 ↗
27. Primary creep at 750°C of Ti48Al48Cr2Nb2 alloys elaborated by powder metallurgy and cast processes10.1016/j.actamat.2005.09.026 ↗
28. Intersections of deformation twins in TiAl. 1. experimental observations10.1080/01418619308213976 ↗
29. Analysis of twin intersections in TiAl10.1080/01418619308207174 ↗
30. Pure climb of [001]dislocations in TiAl at 850°C10.1016/j.scriptamat.2018.02.002 ↗
31. Dynamic strain ageing caused by a new Peierls mechanism at high temperature in iron10.1016/j.scriptamat.2014.09.019 ↗
32. On the stress exponent of dislocation climb velocity10.1016/j.msea.2006.12.166 ↗
33. Study of creep at 750°C of Ti48Al48Cr2Nb2 alloys obtained by powder metallurgy and cast processes10.1051/mattech:2004006 ↗
34. Transmission of the deformation through gamma-gamma interfaces in a polysynthetically twinned TiAl alloy – I. Ordered domain interfaces (120 degrees rotational)10.1080/01418610108214308 ↗
35. Transmission of the deformation through gamma-gamma interfaces in a polysynthetically twinned TiAl alloy – II. Twin interfaces (180 degrees rotational)10.1080/01418610108214309 ↗