Suppressed deformation instability in the twinning-induced plasticity steel-cored three-layer steel sheet
Source abstract
Abstract
Abstract Deformation instabilities (i.e., yield point phenomenon (YPP) and serrated flow) were investigated for twinning-induced plasticity (TWIP) steel-core with low-carbon (LC) steel outer layer sheets. During tensile tests, both the YPP and serrated flow were suppressed as the volume fraction of the TWIP steel-core decreased. Electron backscattering diffraction analysis indicated that a strain gradient was induced, and that geometrically necessary dislocations (GNDs) accumulated at the TWIP-LC steel interface. With increase in the dislocation density by plastic deformation, the deformation instabilities in the TWIP-cored layer steel sheets were suppressed due to the reduced probability of interaction of dislocation with carbon-solutes. This result indicates that the strain gradient at the interface of the layered sheets not only enhances the mechanical property, but also suppresses deformation instability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Evading the strength-ductility trade-off dilemma in steel through gradient hierarchical nanotwins10.1038/ncomms4580 ↗
2. High manganese austenitic twinning induced plasticity steels: a review of the microstructure properties relationships10.1016/j.cossms.2011.04.002 ↗
3. Designing architectured materials10.1016/j.scriptamat.2012.04.033 ↗
4. Designing hybrid materials10.1016/S1359-6454(03)00441-5 ↗
5. On the rule of mixtures for flow stresses in stainless-steel-clad aluminium sandwich sheet metals10.1007/BF01174685 ↗
6. Synergetic strengthening far beyond rule of mixtures in gradient structured aluminum rod10.1016/j.scriptamat.2016.05.006 ↗
7. Synergetic strengthening by gradient structure10.1080/21663831.2014.935821 ↗
8. Extraordinary strain hardening by gradient structure10.1073/pnas.1324069111 ↗
9. Strain hardening and ductility in a coarse-grain/nanostructure laminate material10.1016/j.scriptamat.2015.03.006 ↗
10. Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility10.1073/pnas.1517193112 ↗
11. Mechanical properties of copper/bronze laminates: role of interfaces10.1016/j.actamat.2016.06.023 ↗
12. Novel ultra-high straining process for bulk materials-development of the accumulative roll-bonding (ARB) process10.1016/S1359-6454(98)00365-6 ↗
13. Combining gradient structure and TRIP effect to produce austenite stainless steel with high strength and ductility10.1016/j.actamat.2016.04.045 ↗
14. Multiscale architectured materials with composition and grain size gradients manufactured using high-pressure torsion10.1038/srep26590 ↗
15. A novel strong and ductile TWIP/Martensite steel composite10.1002/adem.201500113 ↗
16. Stress partitioning behavior of multilayered steels during tensile deformation measured by in situ neutron diffraction10.1016/j.scriptamat.2011.10.018 ↗
17. Strain field in a brittle/ductile multilayered steel composite10.1016/j.scriptamat.2011.01.048 ↗
18. Interphase strain gradients in multilayered steel composite from microdiffraction10.1007/s11661-013-2100-5 ↗
19. Development of multilayer steels for improved combinations of high strength and high ductility10.2320/matertrans.M2013382 ↗
20. A novel roll-bonding methodology for the cross-scale analysis of phase properties and interactions in multiphase structural materials10.3139/146.111156 ↗
21. Deep drawing behavior of twinning-induced plasticity-cored three-layer steel sheet10.1007/s12289-016-1324-5 ↗
22. On the origin of dynamic strain aging in twinning-induced plasticity steels10.1016/j.actamat.2011.07.040 ↗
23. Characterisation of the Portevin-Le Châtelier effect affecting an austenitic TWIP steel based on digital image correlation10.1016/j.msea.2010.01.037 ↗
24. The deformation and ageing of mild steel: III discussion of results10.1088/0370-1301/64/9/303 ↗
25. Solute strengthening of both mobile and forest dislocations: the origin of dynamic strain aging in fcc metals10.1016/j.actamat.2008.04.027 ↗
26. On the nature of the yield point phenomenon10.1016/j.actamat.2012.12.003 ↗
27. Dislocation theory of yielding and strain ageing of iron10.1088/0370-1298/62/1/308 ↗
28. Recent observations on quench-aging and strain-aging of iron and steel
29. New observations on the mechanisms of dynamic strain aging and of jerky flow10.1016/0001-6160(79)90130-5 ↗
30. On the origin of dynamic strain aging in twinning-induced plasticity steels10.1016/j.actamat.2011.07.040 ↗
31. Transit flow behaviour associated with dynamic strain aging10.1016/0036-9748(89)90332-3 ↗
32. Effects of Al on microstructure and tensile properties of C-bearing high Mn TWIP steel10.1016/j.actamat.2011.12.004 ↗
33. Strain rate sensitivity of C-alloyed, High-Mn, twinning-induced plasticity steel
34. Obtaining reliable true plastic stress-strain curves in a wide range of strains using digital image correlation in tensile testing10.3365/KJMM.2016.54.4.231 ↗
35. Stretchability and drawability of twinning-induced plasticity steel-cored layer steel sheets10.1016/j.jmatprotec.2017.08.009 ↗
36. Dassault Systems · 2012
37. MWP-fit: a program for multiple whole-profile fitting of diffraction peak profiles by ab initio theoretical functions10.1107/S0021889801011451 ↗
38. Estimating interface bonding strength in clad metals using digital image correlation10.1016/j.scriptamat.2013.02.021 ↗
39. Stress fields and geometrically necessary dislocation density distributions near the head of a blocked slip band10.1016/j.actamat.2012.07.004 ↗
40. Some geometrical relations in dislocated crystals10.1016/0001-6160(53)90054-6 ↗
41. Measurement of geometrically necessary dislocation density with high resolution electron backscatter diffraction: effects of detector binning and step size10.1016/j.ultramic.2012.11.003 ↗
42. Investigation of the indention size effect through the measurement of the geometrically necessary dislocations beneath small indents of different depths using EBSD tomography10.1016/j.actamat.2008.09.039 ↗
43. Stress dependence of mobile dislocation density and dislocation velocity from Lüders band front propagation velocity10.1016/0036-9748(68)90164-6 ↗
44. Serrated flow under uniaxial and multiaxial stress and strain conditions10.1016/0956-716X(91)90041-X ↗
45. Plastic localization phenomena in a Mn-alloyed austenitic steel10.1007/s11661-010-0191-9 ↗