Effect of chemistry on martensitic phase transformation kinetics and resulting properties of additively manufactured stainless steel
Source abstract
Abstract
Abstract Here we investigate the effect of chemistry, including initial powder chemistry and spatial chemical variations due to vaporization during fabrication, on strain-induced martensitic phase transformation in 304L stainless steel components fabricated by directed energy deposition (DED) additive manufacturing (AM). The austenite stability was altered by mixing pre-alloyed 304L stainless steel powder with Fe powder, which promoted martensitic phase transformation and resulted in an increase in ultimate tensile strength and elongation to failure over pure 304L walls deposited by DED AM. The chemical composition variation with position, due to spatial variations in thermal history, was quantified, showing that austenite stabilizing elements Cr, Mn, and Ni were preferentially vaporized during deposition. We present a martensitic transformation kinetics equation that describes the evolution of martensite volume fraction with respect to plastic strain as a function of chemistry. This allows for the prediction of strain-induced martensite evolution as a function of strain, nominal chemistry, and heterogeneous chemistry due to vaporization within additively manufactured components.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Laser additive manufacturing of metallic components: materials, processes and mechanisms10.1179/1743280411Y.0000000014 ↗
2. Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing10.1016/j.actamat.2016.03.019 ↗
3. Mechanical and microstructural properties of selective laser melted 17-4 PH stainless steel
4. Review of mechanical properties of Ti-6Al-4V made by laser- based additive manufacturing using powder feedstock10.1007/s11837-015-1759-z ↗
5. Diffraction and single-crystal elastic constants of Inconel 625 at room and elevated temperatures determined by neutron diffraction10.1016/j.msea.2016.08.010 ↗
6. Crystallographic texture in an additively manufactured nickel-base superalloy10.1016/j.msea.2016.12.028 ↗
7. Martensitic transformations induced by plastic-deformation in Fe-Ni-Cr-C system
8. Formation of martensite in austenitic stainless steels, effect of deformation, temperature and composition
9. A mechanism for the strain-induced nucleation of martensitic transformations10.1016/0022-5088(72)90173-7 ↗
10. A constitutive model for transformation plasticity accompanying strain-induced martensitic transformations in metastable austenitic steels10.1016/0956-7151(92)90114-T ↗
11. Kinetics of strain-induced martensitic nucleation10.1007/BF02672301 ↗
12. Effect of stress triaxiality and Lode angle on the kinetics of strain-induced austenite-to-martensite transformation10.1016/j.actamat.2010.12.040 ↗
13. Mathematical modelling of transformation plasticity in steels II: coupling with strain hardening phenomena10.1016/0749-6419(89)90002-8 ↗
14. A self-consistent model of isotropic viscoplastic behavior in multiphase materials10.1016/0749-6419(91)90043-X ↗
15. Anisotropic plasticity model coupled with Lode angle dependent strain-induced transformation kinetics law10.1016/j.jmps.2012.06.009 ↗
16. The deformation of metals under small stresses during phase transformations
17. Criterion for the action of applied stress in the martensitic transformation10.1016/0001-6160(53)90083-2 ↗
18. Talonen · 2007
19. Metastable austenite in 17-4 precipitation-hardening stainless steel produced by selective laser melting10.1002/adem.200900259 ↗
20. Formation of shear bands and strain-induced martensite during plastic deformation of metastable austenitic stainless steels10.1016/j.actamat.2007.07.015 ↗
21. Optimal refining chemical composition in Fe-Cr-Ni alloys for ultra grain by reversion from deformation induced martensite10.2355/isijinternational.31.721 ↗
22. Anisotropic tensile behavior of Ti–6Al–4V components fabricated with directed energy deposition additive manufacturing10.1016/j.actamat.2014.12.054 ↗
23. Printability of alloys for additive manufacturing10.1038/srep19717 ↗
24. Microstructure and mechanical behavior of 17-4 precipitation hardenable steel processed by selective laser melting10.1007/s11665-014-1226-y ↗
25. Residual stress mapping in Inconel 625 fabricated through additive manufacturing: method for neutron diffraction measurements to validate thermomechanical model predictions10.1016/j.matdes.2016.10.003 ↗
26. Spatial variation of melt pool geometry, peak temperature and solidification parameters during laser assisted additive manufacturing process10.1179/1743284714Y.0000000701 ↗
27. Composition change of stainless steel during microjoining with short laser pulse10.1063/1.1785868 ↗
28. ASTM A479/A479M · 2015 · 1
29. ASTM E8/E8M-15a · 2015 · 1
30. Application of X-ray CT method for discontinuity and porosity detection in 316L stainless steel parts produced with SLM technology
31. Comparison of different methods for measuring strain induced α-martensite content in austenitic steels10.1179/026708304X4367 ↗
32. In-situ ferrite content measurement of duplex steel structures in the chemical industry. Practical applications of the alternating field, magnetoinductive method10.1007/978-3-642-84003-6_73 ↗
33. Identification of the direction-dependency of the martensitic transformation in stainless steel using in situ magnetic permeability measurements10.1007/s11340-010-9374-y ↗
34. Formation of aligned two-phase microstructures by applying a magnetic field during the austenite to ferrite transformation in steels10.1016/S1359-6454(03)00106-X ↗
35. Effect of retained austenite on subsequent thermal processing and resultant mechanical properties of selective laser melted 17-4 PH stainless steel10.1016/j.matdes.2015.05.026 ↗
36. Phase transformation induced by severe plastic deformation in the AISI 304L stainless steel10.1016/S0921-5093(03)00263-6 ↗
37. Deformation processes during tensile straining of ultrafine/nanograined structures formed by reversion in metastable austenitic steels10.1016/j.scriptamat.2008.02.028 ↗
38. The magneto-elastic villari effect in ferrites10.1016/0304-8853(80)90570-3 ↗
39. Virtual strain gage size study
40. First in situ lattice strains measurements under load at VULCAN10.1007/s11661-010-0495-9 ↗
41. Orientation-dependent evolution of the dislocation density in grain populations with different crystallographic orientations relative to the tensile axis in a polycrystalline aggregate of stainless steel10.1016/j.actamat.2013.11.012 ↗
42. Temperature-dependent elastic anisotropy and mesoscale deformation in a nanostructured ferritic alloy10.1038/ncomms6178 ↗
43. An · 2012
44. The use of reference intensity ratios in X-ray quantitative analysis10.1017/S0885715600018686 ↗
45. 2015 · 1
46. ASTM E1086 · 2015 · 1
47. A review of laser fabrication of metallic engineering components and of materials10.1179/174328407X179593 ↗
48. Characterization of stainless steel parts by laser metal deposition shaping10.1016/j.matdes.2013.09.006 ↗
49. Abaqus · 2014
50. Materials for thermal conduction10.1016/S1359-4311(01)00042-4 ↗
51. Man-systems Integration Standards, Natl. Aeronaut. Sp. Adm. (1995). https://msis.jsc.nasa.gov/sections/section04.htm (Accessed 1 January 2017).
52. Thermal contact conductance of nominally flat surfaces10.1007/s00231-006-0087-9 ↗
53. ISO 8249:2000 (en) · 2000
54. Prediction of delta ferrite content and effect of welding process parameters in claddings by FCAW10.1080/10426910500471409 ↗
55. Fischer · 2008
56. Structure and properties of thermal-mechanically treated 304 stainless steel10.1007/BF02642004 ↗
57. Strengthening via the formation of strain-induced martensite in stainless steels10.1016/j.msea.2003.11.084 ↗
58. Deformation-induced martensitic transformation in a 201 austenitic steel: the synergy of stacking fault energy and chemical driving force10.1016/j.msea.2015.12.006 ↗
59. Dependence of tensile deformation behavior of TWIP steels on stacking fault energy, temperature and strain rate10.1016/j.actamat.2010.05.049 ↗
60. A general mechanism of martensitic nucleation: Part I. General concepts and the FCC - HCP transformation
61. Thermodynamic modeling of the stacking fault energy of austenitic steels10.1016/j.actamat.2010.10.037 ↗
62. Effect of nitrogen on stacking fault energy of f.c.c. iron-based alloys10.1016/S1359-6454(98)00419-4 ↗
63. Tensile properties of unstable austenite and its low-temperature decomposition products
64. Behaviour model of austenitic stainless steels for automotive structural parts10.1002/srin.200606448 ↗
65. Temperature distribution and residual stresses due to multipass welding in type 304 stainless steel and low carbon steel weld pads10.1016/S0308-0161(01)00047-3 ↗
66. A thermodynamic model for the stacking-fault energy10.1016/S1359-6454(98)00155-4 ↗
67. Olsson · 2014