Atomistic simulation of the mechanical properties of nanoporous gold

Abstract We study the mechanical behavior of nanoporous gold under uniaxial compression and strain rates in the range of 107–109 s−1 using molecular dynamics simulations. We consider the low-porosity regime (porosity of ∼5%), which is characterized by several stages of plastic deformation. At the onset of plasticity, pores act as if isolated by emitting “shear” dislocation loops. At higher deformations, the mechanical response is determined by the interactions between dislocations in the dense dislocation forest, leading to strain hardening. Increasing the strain rate results in an increasing flow stress ranging from 0.4 to 0.7 GPa within the range of applied strain rates. The von Mises stress σ VM in the hardening regime features two possible power-law dependencies as a function of dislocation density ρ d : in the initial stages of plastic deformation we obtained σ VM ∝ ρ d 2 , but changes to Taylor hardening σ VM ∝ ρ d 1 / 2 at higher dislocation densities. The velocity of dislocations is estimated to be ∼60% of the speed of sound in the early stages of plastic deformation, but later decreases dramatically due to dislocation–dislocation and dislocation–pore interactions. The unloading of the complex dislocation and stacking fault network leads to the production of vacancies. As a result, we propose that the vacancy clusters observed experimentally in recovered samples and attributed to “dislocation-free” plasticity are instead due to the aggregation of those vacancies left behind during recovery.