DataVXComposite InterfacesPaper
journal article·1998-01

Effect of surface treatment on sand erosion behavior of glass beads-filled epoxy resin

Asep Handaya Saputra, Aminul Hasrin, Masatoshi Kubouchi, Ken Tsuda, Kazuyoshi Arai

Composite Interfaces· Volume 6· Issue 6
Publisher page
Source abstract

Abstract

Abstract Effects of the adhesion between filler particle and matrix on the erosion rate were studied in cured epoxy resin filled with glass beads having mean diameter 17 um. In order to observe the effect of adhesion on erosion rate. the filler particles were treated with silane coupling agent, silicone oil and washed by acetone as well. The filler content of the specimen was varied and also the specimens were attacked by different size angular particles. The comparison of each type of specimen shows that by using acetone and silicone oil for surface treatment, the erosion rate is relatively high. Whereas the specimen in which the filler was treated by silane have low erosion rate. The difference of erosion behavior is influenced by impacting particle size and filler content. Using small impacting particles and also low filler content, the erosion behavior between silane and acetone treated was quite different. On the other hand, using large impacting particles and high filler content, the erosion behavior between them was similar. Keywords: Particulate-filled compositeglass beadsepoxyerosionsurface treatment
Source: openalex_inverted_index · Quality: baseline

Research context

Ceramics & glassesComposites

OpenAlex topics: Erosion and Abrasive Machining · Coal Combustion and Slurry Processing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

a Department of Chemical Engineering, Tokyo Institute of Technology, O-okayama 2-12-1, Meguro-ku, Tokyo 152-8552, Japan

b Department of Chemical Engineering, Tokyo Institute of Technology, O-okayama 2-12-1, Meguro-ku, Tokyo 152-8552, Japan

c Department of Chemical Engineering, Tokyo Institute of Technology, O-okayama 2-12-1, Meguro-ku, Tokyo 152-8552, Japan

d Department of Chemical Engineering, Tokyo Institute of Technology, O-okayama 2-12-1, Meguro-ku, Tokyo 152-8552, Japan

e Department of Mechanical Engineering, Hosei University, 3-7-2 Kujino-cho, Koganei-shi, Tokyo 184-8584, Japan

References (10)

Show source-provided references
1. Haraki , N. Tsuda , K. and Hojo , H. 1991.Proc. of ICCM/816-0-1Honolulu10.1177/096369359200100108 ↗
2. Haraki , N. Tsuda , K. and Hojo , H. 1993.Proc. of ICCM/9569Madrid
3. 10.1016/0043-1648(94)90358-110.1016/0043-1648(94)90358-1 ↗
4. Itoh Y. · J. Soc. Mitet: Sci., Jpn · 1990 · 39 · 154
5. Nakamura Y. · Adhesion Soc. Jpn · 1993 · 29 · 53
6. Ohta M. · Polymers & Polymer Composites · 1994 · 2 · 21510.1177/096739119400200401 ↗
7. 10.1016/0043-1648(75)90154-410.1016/0043-1648(75)90154-4 ↗
8. 10.1007/BF0054382710.1007/BF00543827 ↗
9. 10.1080/0091403710807185110.1080/00914037108071851 ↗
10. 10.1016/0043-1648(69)90048-910.1016/0043-1648(69)90048-9 ↗