In situ synchrotron high-energy X-ray diffraction study of microscopic deformation behavior of a hard-soft dual phase composite containing phase transforming matrix
Source abstract
Abstract
\n\tThis study explored a novel intermetallic composite design concept based on the principle of lattice strain matching enabled by the collective atomic load transfer. It investigated the hard-soft microscopic deformation behavior of a Ti3Sn/TiNi eutectic hard-soft dual phase composite by means of in situ synchrotron high-energy X-ray diffraction (HE-XRD) during compression. The composite provides a unique micromechanical system with distinctive deformation behaviors and mechanisms from the two components with the soft TiNi matrix deforming in full compliance via martensite variant reorientation and the hard Ti3Sn lamellae deforming predominantly by rigid body rotation producing a crystallographic texture for the TiNi matrix and a preferred alignment for the Ti3Sn lamellae. HE-XRD reveals continued martensite variant reorientation during plastic deformation well beyond the stress plateau of TiNi. The hard and brittle Ti3Sn is also found to produce an exceptionally large elastic strain of 1.95% in the composite. This is attributed to the effect of lattice strain matching between the transformation lattice distortion of the TiNi matrix and the elastic strain of Ti3Sn lamellae. With such unique micromechanic characteristics the composite exhibits high strength and large ductility. (C) 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Aluminum Alloys Composites Properties · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Approaching the theoretical elastic strain limit in copper nanowires10.1021/nl201233u ↗
2. Ultrahigh strength single crystalline nanowhiskers grown by physical vapor deposition10.1021/nl9015107 ↗
3. High-performance carbon nanotube fiber10.1126/science.1147635 ↗
4. A micromechanical model of toughening behavior in the dual-phase composite10.1016/j.ijplas.2010.01.005 ↗
5. Tensile properties of particulate-reinforced metal matrix composites10.1016/1359-835X(96)00040-1 ↗
6. Effect of particle size on the thermal and mechanical properties of aluminum composites reinforced with SiC and diamond10.1016/j.matdes.2015.11.028 ↗
7. Interfacial strength and deformation mechanism of SiC–Al composite micro-pillars10.1016/j.scriptamat.2015.11.018 ↗
8. Novel Ti-base nanostructure–dendrite composite with enhanced plasticity10.1038/nmat792 ↗
9. Designing metallic glass matrix composites with high toughness and tensile ductility10.1038/nature06598 ↗
10. A tensile deformation model for in-situ dendrite/metallic glass matrix composites10.1038/srep02816 ↗
11. Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off10.1038/nature17981 ↗
12. Mechanical properties and microstructure evolutions of multilayered Al–Cu composites produced by accumulative roll bonding process and subsequent annealing10.1016/j.msea.2014.02.023 ↗
13. Deformation of SiC/Al composites10.1007/BF03258711 ↗
14. Effect of ceramic preform geometry on load partitioning in Al2O3–Al composites with three-dimensional periodic architecture10.1016/j.msea.2009.07.033 ↗
15. Investigation of deformation and microstructural evolution in Grade 91 ferritic–martensitic steel by in situ high-energy X-rays10.1016/j.actamat.2013.10.003 ↗
16. Load partitioning during compressive loading of a Mg/MgB2 composite10.1016/j.actamat.2007.01.046 ↗
17. Load partitioning between ferrite and cementite during elasto-plastic deformation of an ultrahigh-carbon steel10.1016/j.actamat.2006.11.004 ↗
18. Synchrotron X-ray diffraction measurements of internal stresses during loading of steel-based metal matrix composites reinforced with TiB2 particles10.1016/j.actamat.2011.02.012 ↗
19. A transforming metal nanocomposite with large elastic strain, low modulus, and high strength10.1126/science.1228602 ↗
20. Retaining large and adjustable elastic strains of kilogram-scale Nb nanowires10.1021/acsami.5b10840 ↗
21. Revealing ultralarge and localized elastic lattice strains in Nb nanowires embedded in NiTi matrix10.1038/srep17530 ↗
22. High-strength and ductile glassy-crystal Ni-Cu-Zr-Ti composite exhibiting stress-induced martensitic transformation10.1080/14786430903128577 ↗
23. Deformation-induced martensitic transformation in Cu-Zr-(Al, Ti) bulk metallic glass composites10.1016/j.scriptamat.2008.11.015 ↗
24. High-strength Ti-base ultrafine eutectic with enhanced ductility10.1063/1.2105998 ↗
25. High strength ultrafine eutectic Fe-Nb-Al composites with enhanced plasticity10.1016/j.intermet.2008.01.005 ↗
26. Nanostructure-dendrite composites in the Fe-Zr binary alloy system exhibiting high strength and plasticity10.1016/j.scriptamat.2007.08.004 ↗
27. High-strength bulk Al-based bimodal ultrafine eutectic composite with enhanced plasticity10.1557/jmr.2009.0297 ↗
28. The role of Nd on the microstructural evolution and compressive behavior of Ti-Si alloys10.1016/j.msea.2012.09.105 ↗
29. Influence of heterogeneities with different length scale on the plasticity of Fe-base ultrafine eutectic alloys10.1557/JMR.2008.0252 ↗
30. Effect of Nb on microstructure and mechanical properties of ultrafine eutectic Fe-Ni-B-Si composites10.1016/j.jallcom.2010.02.066 ↗
31. Plastic deformation of Ti3Sn10.2320/matertrans1989.31.195 ↗
32. In situ neutron diffraction investigation of the collaborative deformation-transformation mechanism in TRIP-assisted steels at room and elevated temperatures10.1016/j.actamat.2008.03.026 ↗
33. In situ study of internal load transfer in a novel metal/ceramic composite exhibiting lamellar microstructure using energy dispersive synchrotron x-ray diffraction10.1002/adem.200800352 ↗
34. Load partitioning in honeycomb-like silicon carbide aluminum alloy composites10.1016/j.actamat.2009.08.050 ↗
35. An in situ high-energy X-ray diffraction study of micromechanical behavior of multiple phases in advanced high-strength steels10.1016/j.actamat.2009.05.002 ↗
36. In situ x-ray investigation of freestanding nanoscale Cu-Nb multilayers under tensile load10.1063/1.3074374 ↗
37. A new criterion for elasto-plastic transition in nanomaterials: application to size and composite effects on Cu-Nb nanocomposite wires10.1016/j.actamat.2009.03.021 ↗
38. Physical metallurgy of TiNi-based shape memory alloys10.1016/j.pmatsci.2004.10.001 ↗
39. NiTi and NiTi-TiC composites: part IV. Neutron diffraction study of twinning and shape-memory recovery10.1007/BF02652374 ↗
40. Slip systems in the intermetallic compound Ti3Sn10.1080/14786437308227416 ↗
41. In situ measurement of grain rotation during deformation of polycrystals10.1126/science.1057956 ↗
42. Ideal pure shear strength of aluminum and copper10.1126/science.1076652 ↗
43. A biopolymer-like metal enabled hybrid material with exceptional mechanical prowess10.1038/srep08357 ↗