journal article·2012-11

Maintenance of highly interfacial shear strength by diblock copolymer between carbon fiber and epoxy resin in hostile environment

Shuanghui Deng, Wendi Ma, Xiaodong Zhou, Chuanjie Fan

Composite Interfaces· Volume 19· Issue 8
Publisher page

Abstract

The environmental resistance properties of carbon fiber (CF), with various surface modifications, reinforcing epoxy resin composites have been studied by a microbond test. The results of cooling–heating cycling between −40 and 95 °C indicate that the introduction of the flexible poly(n-butyl acrylate) (PnBA) blocks into the interface can effectively decrease the interfacial degradation rate, induced by interfacial thermal stress. After 50 cooling–heating cycles, the interfacial shear strength between CF and epoxy resin was still as high as 32.69 ± 2.13 MPa. The results of hygrothermal treatment by immersing the composites in hot water show that assembly morphology of the diblock copolymer hydroxyl-terminated poly(n-butyl acrylate-b-glycidyl methacrylate) (OH-PnBA-b-GMA) at the interface can decrease the interfacial water absorption and thus increase the hygrothermal resistance of the composite. Besides, the length of PnBA block in the diblock copolymer influenced the interfacial properties of the composite in a hygrothermal environment.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fiber-reinforced polymer composites · Photopolymerization techniques and applications · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. 10.1002/app.1084410.1002/app.10844 ↗
2. 10.1007/s00784-011-0576-110.1007/s00784-011-0576-1 ↗
3. Ray BC. Temperature effect during humid aging on interfaces of glass and carbon fibers reinforced epoxy composites, J. Colloid Interface Sci. 2006;298:111–117.10.1016/j.jcis.2005.12.023 ↗
4. 10.1016/S1359-835X(03)00154-410.1016/S1359-835X(03)00154-4 ↗
5. 10.1016/j.compscitech.2012.01.01010.1016/j.compscitech.2012.01.010 ↗
6. 10.1038/scientificamerican1287-12210.1038/scientificamerican1287-122 ↗
7. 10.1016/0010-4361(83)90160-X10.1016/0010-4361(83)90160-X ↗
8. 10.1016/S0014-3057(01)00033-710.1016/S0014-3057(01)00033-7 ↗
9. 10.1016/j.apsusc.2010.08.10210.1016/j.apsusc.2010.08.102 ↗
10. 10.1163/156855498X0019910.1163/156855498X00199 ↗
11. 10.1016/j.compscitech.2004.09.01910.1016/j.compscitech.2004.09.019 ↗
12. Kim JK, Mai YW. Improvement of transverse fracture toughness with interface control. In: Engineered interfaces in fiber reinforced composites. Oxford: Elsevier Science Ltd; 1998. p. 279–327.10.1016/B978-008042695-2/50008-7 ↗
13. 10.1002/pc.1010310.1002/pc.10103 ↗
14. 10.1016/j.compscitech.2006.12.01610.1016/j.compscitech.2006.12.016 ↗
15. Zinck P, Gerard JF. Thermo-hydrolytic resistance of polyepoxide-glass fibre interfaces by microbond test. Compos. Sci. Technol. 2008;68:2028–2033.10.1016/j.compscitech.2008.02.025 ↗
16. 10.1016/j.matlet.2009.04.00710.1016/j.matlet.2009.04.007 ↗
17. 10.1016/j.matdes.2011.04.00710.1016/j.matdes.2011.04.007 ↗
18. 10.1016/j.compscitech.2006.03.03010.1016/j.compscitech.2006.03.030 ↗
19. 10.1016/j.compositesa.2012.01.00410.1016/j.compositesa.2012.01.004 ↗
20. Houshyar S, Shanks RA. Interfacial properties of all-polypropylene composites. E-polymer. 2010;33:1–13.10.1515/epoly.2010.10.1.336 ↗
21. 10.1080/03602559.2010.53186310.1080/03602559.2010.531863 ↗
22. 10.1002/app.2687510.1002/app.26875 ↗
23. 10.1016/S0032-3861(01)00241-510.1016/S0032-3861(01)00241-5 ↗
24. 10.1016/S1359-835X(03)00135-010.1016/S1359-835X(03)00135-0 ↗
25. 10.1002/(SICI)1097-4628(19980711)69:2<363::AID-APP18>3.0.CO;2-X10.1002/(SICI)1097-4628(19980711)69:2<363::AID-APP18>3.0.CO;2-X ↗
26. Cao X · New Carbon Mater. · 2006 · 4 · 337
27. 10.1163/156855412X62627010.1163/156855412X626270 ↗
28. 10.1016/j.compscitech.2009.04.00810.1016/j.compscitech.2009.04.008 ↗