Formation mechanism of lamellar chips during machining of bulk metallic glass
Source abstract
Abstract
The uniqThe unique lamellar chips formed in turning–machining of a Vit 1 bulk metallic glass (BMG) are found to be due to repeated shearband formation in the primary shear zone (PSZ). A coupled thermomechanical orthogonal cutting model, taking into account force, free volume and energy balance in the PSZ, is developed to quantitatively characterize lamellar chip formation. Its onset criterion is revealed through a linear perturbation analysis. Lamellar chip formation is understood as a self-sustained limit-cycle phenomenon: there is autonomous feedback in stress, free volume and temperature in the PSZ. The underlying mechanism is the symmetry breaking of free volume flow and source, rather than thermal instability. These results are fundamentally useful for machining BMGs and even for understanding the physical nature of inhomogeneous flow in BMGs.ue lamellar chips formed in turning–machining of a Vit 1 bulk metallic glass (BMG) are found to be due to repeated shearband.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Trent · 2000
2. Chip Formation in Machining Ti6Al4V at Extremely High Cutting Speeds10.1016/S0007-8506(07)62068-X ↗
3. The formation of the built-up edge
4. Mechanics of saw-tooth chip formation in metal cutting10.1115/1.2831200 ↗
5. The formation of continuous chips in metal cutting
6. Catastrophic thermoplastic shear10.1115/1.3629585 ↗
7. The influence of extreme speeds and rake angles in metal cutting10.1115/1.3667587 ↗
8. Chip formation, cutting forces, and tool wear in turning of Zr-based bulk metallic glass10.1016/j.ijmachtools.2004.02.002 ↗
9. US machining and grinding research in the 20th century10.1115/1.3121401 ↗
10. Bulk glass-forming metallic alloys: science and technology10.1557/S0883769400053252 ↗
11. Stabilization of metallic supercooled liquid and bulk amorphous alloys10.1016/S1359-6454(99)00300-6 ↗
12. Bulk metallic glasses10.1016/j.mser.2004.03.001 ↗
13. Metallic glasses as structural materials10.1016/j.scriptamat.2005.09.051 ↗
14. Mechanical behavior of amorphous alloys10.1016/j.actamat.2007.01.052 ↗
15. Mechanical properties of bulk metallic glasses and composites10.1557/jmr.2007.0050 ↗
16. Basic mechanical behaviors and mechanics of shear banding in BMGs10.1016/j.ijimpeng.2007.10.007 ↗
17. Machining of a Zr-Ti-Al-Cu-Ni metallic glass10.1016/j.scriptamat.2003.11.052 ↗
18. Light emission, chip morphology, and burr formation in drilling the bulk metallic glass10.1016/j.ijmachtools.2004.11.004 ↗
19. Fabrication and characterization of metallic glasses with a specific microstructure for micro-electro-mechanical system applications10.1016/j.jnoncrysol.2008.01.030 ↗
20. Chip formation mechanism in microcutting of an amorphous metal10.1016/S0007-8506(07)61168-8 ↗
21. On repeated adiabatic shear band formation during high-speed machining10.1016/S0749-6419(01)00006-7 ↗
22. Nonlinear dynamics model for chip segmentation in machining10.1103/PhysRevLett.79.447 ↗
23. Chaotic phenomena induced by the fast plastic deformation of metals during cutting10.1115/1.2074727 ↗
24. A microscopic mechanism for steady state inhomogeneous flow in metallic glasses10.1016/0001-6160(77)90232-2 ↗
25. Plastic deformation in metallic glasses10.1016/0001-6160(79)90055-5 ↗
26. Spaepen · 1981
27. A highly processable metallic glass: Zr-Ti-Cu-Ni-Be10.1063/1.110520 ↗
28. High strength bulk amorphous alloys with low critical cooling rates10.2320/matertrans1989.36.866 ↗
29. Johnson · Curr Opin Solid State Mater Sci · 1996 · 1 · 38310.1016/S1359-0286(96)80029-5 ↗
30. Difference in compressive and tensile fracture mechanisms of Zr59Cu20Al10Ni3Ti3 bulk metallic glass10.1016/S1359-6454(02)00521-9 ↗
31. Energy dissipation in fracture of bulk metallic glasses via inherent competition between local softening and quasi-cleavage10.1080/14786430701864753 ↗
32. Instability of crack propagation in brittle bulk metallic glass10.1016/j.actamat.2008.08.005 ↗
33. The mechanism of fracture in glassy materials capable of some inelastic deformation10.1016/0025-5416(76)90198-1 ↗
34. Mechanics of the metal cutting process. I. Orthogonal cutting and a type 2 chip10.1063/1.1707586 ↗
35. Adiabatic shear banding instability in bulk metallic glasses10.1063/1.2067691 ↗
36. Jiang MQ, Dai LH. On the origin of shear banding instability in metallic glasses. Unpublished work; 2009.10.1016/j.jmps.2009.04.008 ↗
37. Analytical and experimental study of shear localization in chip formation in orthogonal machining10.1007/BF02682702 ↗
38. Basic Mechanics of the Metal Cutting Process
39. Modelling metal cutting using modern ductile fracture mechanics: quantitative explanations for some longstanding problems10.1016/S0020-7403(03)00040-7 ↗
40. Toughness and cutting: a new way of simultaneously determining ductile fracture toughness and strength10.1016/j.engfracmech.2004.07.014 ↗
41. Initiation and propagation of shear bands in Zr-based bulk metallic glass under quasi-static and dynamic shear loadings10.1016/j.jnoncrysol.2005.07.030 ↗
42. Strain localization in amorphous metals10.1016/0001-6160(82)90225-5 ↗
43. Shaw · 1984
44. Temperature rise at shear bands in metallic glasses10.1038/nmat1536 ↗
45. Thermomechanical instability analysis of inhomogeneous deformation in amorphous alloys10.1016/j.actamat.2006.11.027 ↗