Discontinuous surface-treated submicron-diameter carbon filaments as an interlaminar filler in carbon fiber polymer-matrix composites for vibration reduction

Abstract Discontinuous surface-treated submicron-diameter carbon filaments are effective for use as an interlayer between continuous carbon fiber laminae in a nylon-6 matrix composite for enhancing the loss tangent (0.2 and 1.0 Hz) under flexure that involves bending of the fibers, without significant decrease of the flexural storage modulus or the tensile modulus or strength in the fiber direction. The surface treatment is oxidation using ozone. Without treatment, the filaments are not effective. The treated filaments amount to 0.64 vol.% of composite; the interlayer thickness is 77 μm. A viscoelastic interlayer is even more effective than the treated filament interlayer for enhancing the loss tangent, but the accompanying decrease in storage modulus is much more. The loss tangent for composite with viscoelastic interlayer decreases upon heating, so the loss modulus for this composite is less than that of the composite with treated filament interlayer at ⩾50°C. Keywords: Polymer-matrix compositedampingvibrationmechanicalcarbon fibernylon