Source abstract
Abstract
Au nanoparticle (NP)-decorated titanium dioxide (TiO 2 ) thin films (Au-TO), prepared by a unique surfactant-assisted 2D self-assembling technique of Au NP layering onto a titanium dioxide matrix (TO) with molecular-level control, in conjunction with a classic sol–gel route, showed a significant decrease in the optical band gap (Δ E g = ∼0.6 eV) of Au-TO films compared to the conventional sol–gel-prepared pristine counterpart. Strong dependence on surfactant type and deposition temperature of the 2D Au NP layer was observed upon a band gap decrease of the films. Unlike spin-coated Au NP overlayers on TiO 2, which resulted in Au NP agglomeration, in this modified inverted Langmuir–Schaefer (MILS) technique, the organic surfactant induced 2D patterned confinement of Au NP layers on TiO 2, causing an increase in the active surface area of the Au NP–TiO 2 interface. Results of X-ray diffraction and near-edge X-ray absorption fine structure spectroscopy indicated changes in crystal structure as well as in electronic states at the O k absorption edge for Au NP–surfactant patterned films, changes being maximum for films showing a maximum band gap decrease. A temperature evolution of morphology of Au-TO films and their Au NP–surfactant monolayer counterpart at the air–water interface, by ellipsometric imaging and Brewster angle microscopy, respectively, revealed that Au NP patterning was induced by surfactant and varied with the temperature of the Au NP–surfactant monolayer, the band gap decrease being closely associated with a change in the active Au NP–TiO 2 surface area. The maximum band gap decrease was observed for Au-TO films having tree- or finger-like 2D Au NP patterns, clearly indicating that an increase in active Au–TiO 2 surface area causes enhancement in structural changes and hence a greater band gap decrease of the system. Results demonstrate the potential of the MILS technique of surfactant-aided Au NP-patterned confinement in semiconducting oxides, in band gap engineering of the latter.
Source: openalex_inverted_index · Quality: baseline
Affiliations
Advanced Mechanical and Material Characterization Division, CSIR-Central Glass and Ceramic Research Institute, 196 Raja S.C. Mullick Road, Kolkata 700032, India
Surface Physics and Material Science Division, Saha Institute of Nuclear Physics, 1/AF Bidhannagar, Kolkata 700064, India
Institute of Engineering and Management, D-1, Sector V, Saltlake Electronic Complex, Kolkata 700091, India
IOM CNR Laboratorio TASC, Elettra Synchrotron, Area Science Park, 34149 Basovizza (TS), Trieste, Italy
Funding
Council of Scientific and Industrial Research · Department of Science and Technology, Ministry of Science and Technology