journal article·2009-01-29

Cooperative Phase Transformation in Self-Assembled Metal-on-Oxide Arrays

Giovanni Barcaro, Alessandro Fortunelli, Gaetano Granozzi, Francesco Sedona

Publisher page

Abstract

The thermal behavior of a composite system formed by gold nanoclusters self-organized on a TiO x /Pt(111) ultrathin film is investigated via first-principles simulations. A cooperative phase transformation from a rectangular to an hexagonal phase occurs at high temperature, by which Au clusters do not coalesce, but rearrange their shape and positions together with the more mobile regions of the oxide. A model describing the atomistic processes behind this transformation is proposed that is in full agreement with available experimental data.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: nanoparticles nucleation surface interactions · Catalytic Processes in Materials Science · Theoretical and Computational Physics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

IPCF-CNR, Via G. Moruzzi 1, Pisa, 56124, Italy, and Dip. di Scienze Chimiche, Università di Padova, Via Marzolo 1, Padova, 35131, Italy

References (23)

Show source-provided references
1. Freund H.-J. · Surf. Sci. · 2007 · 601 · 143810.1016/j.susc.2007.01.025 ↗
2. Sterrer M. · Phys. Rev. Lett. · 2005 · 94 · 18610110.1103/PhysRevLett.94.186101 ↗
3. Barcaro G. · Phys. Chem. Chem. Phys. · 2008 · 10 · 187610.1039/b719346g ↗
4. Hamm G. · Nanotechnology · 2006 · 17 · 194310.1088/0957-4484/17/8/024 ↗
5. Hutchings G. J. · Appl. Catal., A · 2005 · 291 · 110.1016/j.apcata.2005.04.058 ↗
6. Parker S. C. · Top. Catal. · 2007 · 44 · 310.1007/s11244-007-0274-z ↗
7. Yoon B. · Science · 2005 · 307 · 40310.1126/science.1104168 ↗
8. Chen M. S. · Top. Catal. · 2007 · 44 · 4110.1007/s11244-007-0276-x ↗
9. Matthey D. · Science · 2007 · 315 · 169210.1126/science.1135752 ↗
10. Goguet A. · J. Phys. Chem. C · 2007 · 111 · 1692710.1021/jp0743976 ↗
11. Sedona F. · Phys. Rev. B · 2008 · 77 · 11541710.1103/PhysRevB.77.115417 ↗
12. Sedona F. · J. Phys. Chem. C · 2007 · 111 · 802410.1021/jp0687652 ↗
13. Sedona F. · J. Phys. Chem. B · 2005 · 109 · 2441110.1021/jp0543173 ↗
14. The pictures reported in Figure2were obtained during the same STM experiments reported in ref12to which the reader is referred to for more details. The TiOxfilm was prepared by reactive deposition in the presence of oxygen (pO2= 10−4Pa) and successive annealing in UHV at 673 K.(11)Au was evaporated from a filament basket on the TiOxsubstrate held at RT under UHV with a typical deposition rate of about 0.3 ML/minute. The sample preparation and characterization was performed using an OMICRON STM UHV system with a base pressure <5 × 10− 9Pa. STM images were obtained in constant current mode at RT.
15. In ref12, this transformation was interpreted as into a differentw-TiOx/Pt(111) phase; the present analysis supersedes this previous hypothesis.
16. Car R. · Phys. Rev. Lett. · 1985 · 55 · 247110.1103/PhysRevLett.55.2471 ↗
17. The CP calculations were performed using the ESPRESSO software (http://www.quantum-espresso.org). The time step was set to 25 au, the electron mass 3500 au, a CP run consisted of 500 minimization steps, 200 MD steps starting with null velocities at 300 K, and a variable number of production MD steps at the chosen temperature for a total simulation time between 3 and 5 ps using a Nosè thermostat for the kinetic energy of the electronic wave function. The CP runs were conducted at the Cray XT4 supercomputer of CSC ((http://www.csc.fi) in Espoo, Finland.
18. The PWscf (http://www.pwscf.org) calculations used ultrasoft pseudopotentials, the PW91 exchange-correlation functional,(22)and the following computational parameters (identical to those used in ref3): 30 Ryd for the energy cutoff on the wave function, 150 Ryd for the energy cutoff on the electronic density, about 8−10 Å of empty space between atoms in replicated cells, a (2,2,1)kmeshgrid for the sampling of the first Brillouin zone, and 2 layers of Pt for describing the metal support.
19. Barcaro G. · Chem.—Eur. J. · 2007 · 13 · 640810.1002/chem.200601796 ↗
20. The DF-BH method is based on a basin-hopping algorithm for the exploration of the potential energy surface combined with a density-functional method for the calculation of energies and forces. Each BH run starts with a randomly chosen atomic configuration and is composed of a given number of Monte Carlo steps. In each of these, the starting configuration is first locally optimized to obtain an energyE1, then subjected to a random displacement of all the atoms up to ±1 Å in each Cartesian coordinates, and finally locally optimized to obtain a new energyE2. If exp[(E1−E2)/kBT] > rndm, where rndm is a random number (Metropolis criterion), the new configuration is accepted; otherwise the old configuration is kept and the process is iterated. For each size, we performed three to five BH runs, each one composed of about 10−15 Monte Carlo steps, using a value of 0.5 eV askBTin the Metropolis criterion.
21. Tersoff J. · Phys. Rev. Lett. · 1983 · 50 · 199810.1103/PhysRevLett.50.1998 ↗
22. Perdew J. P. · Phys. Rev. B · 1992 · 46 · 667110.1103/PhysRevB.46.6671 ↗
23. Vanderbilt D. · Phys. Rev. B · 1990 · 41 · 789210.1103/PhysRevB.41.7892 ↗