journal article·2019-08-01Open access

Photo-Initiated Cross-Linking of a Methacrylate/Ionic Liquid Based Gel Polymer Electrolyte: Effect of the Curing Sequence on the Electrochemical Properties

H. Porthault, G. Piana, M. Cesbron, V. Armel, A. Bazin, S. Franger, S. Oukassi

The Journal of Physical Chemistry C· Volume 123· Issue 30

Abstract

In the present work, emphasis is given to the effect of the photocuring sequence on the electrochemical properties of a methacrylate/ionic liquid based gel polymer electrolyte (GPE). The reaction mixture consists of BEMA (30 wt %), LiTFSI (18 wt %), and PYR13TFSI ionic liquid (52 wt %) using Darocur1173 as photoinitiator. In-situ photo-DSC analyses show that the radiation intensity has no effect on the final conversion rate (100% in all cases), whereas it considerably influences the polymerization rate and the final GPE structure. Namely, the obtained GPE mechanical strength increases with the radiation intensity (from 82 to 182 kPa). For the same initial precursor solution, the GPE cured with the lower radiation intensity presents the highest ionic conductivity (up to +40%, 0.8 mS cm –1 at 25 °C). The temperature dependence of the ionic conductivity exhibits a VTF behavior for all considered cross-linking conditions. Particular attention is given to the investigation of the transport properties in the GPE using diffusion measurements by nuclear magnetic resonance spectroscopy (PFG-NMR). It is found that for the same initial precursor solution, the lower radiation intensities tend to provide low cross-linking density polymers with longer chains which lead to an ionic conductivity increase.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Ionic liquids properties and applications · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Univ. Grenoble Alpes, CEA, LETI, MINATEC Campus, 38054 Grenoble, France

Institut de Chimie Moléculaire et des Matériaux d’Orsay, Univ. Paris-Sud XI, Orsay, France

Funding

Horizon 2020 Framework Programme

References (56)

Show source-provided references
1. 10.1016/0167-2738(94)90419-710.1016/0167-2738(94)90419-7 ↗
2. 10.1016/0167-2738(83)90068-110.1016/0167-2738(83)90068-1 ↗
3. Armand, M.; J. M. C; Duclot, M. Polymeric Solid Electrolytes. Second International Meeting on Solid Electrolytes, St. Andrews, Scotland, 1978.
4. 10.1016/S0378-7753(99)00529-710.1016/S0378-7753(99)00529-7 ↗
5. 10.1016/j.progpolymsci.2017.12.00410.1016/j.progpolymsci.2017.12.004 ↗
6. 10.1007/s10853-018-03188-810.1007/s10853-018-03188-8 ↗
7. 10.1021/acsami.5b0541910.1021/acsami.5b05419 ↗
8. 10.1021/acs.macromol.7b0003510.1021/acs.macromol.7b00035 ↗
9. 10.1007/BF0062596010.1007/BF00625960 ↗
10. 10.1002/aenm.20170218410.1002/aenm.201702184 ↗
11. 10.1039/C8TA03358G10.1039/C8TA03358G ↗
12. 10.1002/cssc.20150028410.1002/cssc.201500284 ↗
13. 10.1016/0167-2738(96)00330-X10.1016/0167-2738(96)00330-X ↗
14. 10.1021/acs.macromol.6b0091810.1021/acs.macromol.6b00918 ↗
15. 10.1016/S0013-4686(99)00330-810.1016/S0013-4686(99)00330-8 ↗
16. 10.1016/j.electacta.2013.10.20210.1016/j.electacta.2013.10.202 ↗
17. 10.1149/1.312288510.1149/1.3122885 ↗
18. 10.1021/acsami.5b0272910.1021/acsami.5b02729 ↗
19. 10.1016/j.porgcoat.2010.04.01110.1016/j.porgcoat.2010.04.011 ↗
20. 10.1016/j.eurpolymj.2008.04.02610.1016/j.eurpolymj.2008.04.026 ↗
21. 10.1016/j.jpowsour.2009.09.04710.1016/j.jpowsour.2009.09.047 ↗
22. 10.1016/j.eurpolymj.2008.06.02210.1016/j.eurpolymj.2008.06.022 ↗
23. 10.1016/j.jpowsour.2009.10.07910.1016/j.jpowsour.2009.10.079 ↗
24. 10.1016/j.jpowsour.2018.11.06110.1016/j.jpowsour.2018.11.061 ↗
25. 10.1021/mz500598610.1021/mz5005986 ↗
26. 10.1021/acsami.8b0467210.1021/acsami.8b04672 ↗
27. Odian G. · 200410.1002/047147875X ↗
28. 10.1002/pat.76010.1002/pat.760 ↗
29. 10.1021/ma400822510.1021/ma4008225 ↗
30. 10.1002/adma.20120418210.1002/adma.201204182 ↗
31. 10.1039/C4TA00494A10.1039/C4TA00494A ↗
32. 10.1007/s10800-009-9805-610.1007/s10800-009-9805-6 ↗
33. 10.1016/j.ssi.2013.10.05010.1016/j.ssi.2013.10.050 ↗
34. Ravve A. · 201210.1007/978-1-4614-2212-9 ↗
35. 10.3144/expresspolymlett.2012.910.3144/expresspolymlett.2012.9 ↗
36. 10.1016/j.electacta.2014.11.14110.1016/j.electacta.2014.11.141 ↗
37. Tosoni M. · Int. J. Electrochem. Sci. · 2014 · 9 · 360210.1016/S1452-3981(23)08034-3 ↗
38. 10.1021/acsami.8b0008310.1021/acsami.8b00083 ↗
39. Imperiyka M. · Int. J. Electrochem. Sci. · 2013 · 8 · 1093210.1016/S1452-3981(23)13160-9 ↗
40. 10.1021/ma020628p10.1021/ma020628p ↗
41. 10.1103/PhysRev.80.58010.1103/PhysRev.80.580 ↗
42. 10.1063/1.169569010.1063/1.1695690 ↗
43. 10.1063/1.167030610.1063/1.1670306 ↗
44. 10.1002/(SICI)1099-0534(1997)9:5<299::AID-CMR2>3.0.CO;2-U10.1002/(SICI)1099-0534(1997)9:5<299::AID-CMR2>3.0.CO;2-U ↗
45. 10.1039/b507309j10.1039/b507309j ↗
46. 10.1016/0032-3861(94)90129-510.1016/0032-3861(94)90129-5 ↗
47. 10.1002/macp.20060005310.1002/macp.200600053 ↗
48. 10.1021/cm049942j10.1021/cm049942j ↗
49. 10.1016/j.coelec.2018.03.03310.1016/j.coelec.2018.03.033 ↗
50. 10.1021/acs.macromol.7b0042310.1021/acs.macromol.7b00423 ↗
51. 10.1002/(SICI)1521-4095(199804)10:6<439::AID-ADMA439>3.0.CO;2-I10.1002/(SICI)1521-4095(199804)10:6<439::AID-ADMA439>3.0.CO;2-I ↗
52. 10.1016/j.jpowsour.2009.06.08910.1016/j.jpowsour.2009.06.089 ↗
53. 10.1016/j.electacta.2006.03.01610.1016/j.electacta.2006.03.016 ↗
54. 10.1016/0167-2738(88)90304-910.1016/0167-2738(88)90304-9 ↗
55. 10.1016/0167-2738(88)90303-710.1016/0167-2738(88)90303-7 ↗
56. 10.1021/acsenergylett.7b0079210.1021/acsenergylett.7b00792 ↗