Preparation and Formation Mechanism of Hollow Microspherical Tungsten Carbide with Mesoporosity
Source abstract
Abstract
Hollow microspherical tungsten carbide with mesoporosity was prepared by spray-drying sphere miniaturization/gas−solid reaction, using ammonium metatungstate (AMT) as a precursor, carbon monoxide as a reducing gas, and carbon dioxide as a carrier gas. The samples were characterized by XRD, SEM, and EDS. XRD and EDS results show that the samples are phase pure WC, with a ratio of W/C ≈ 1. SEM results show that the hollow microsphere forms during spray-drying sphere miniaturization, and mesoporosity forms by gas−solid reaction during subsequent heat treatment. To investigate the phase transition during the gas−solid reaction, the samples were monitored by in situ XRD in an Anton Paar XRX900 container. The in situ XRD results show that when the reaction temperature is raised to 1023 K slowly and continuously, the phase transition of the sample follows the pattern AMT → WO 3 → WO 2 → W 2 C → WC, but when the reaction temperature is raised to 673 K slowly and then raised to 1023 K quickly, the phase transition of the sample follows AMT → WO 3 → WO 2 → WC. These results indicate that the phase transition of the sample during the heat treatment step is connected to the temperature and the time of the reaction, as well as the rate of the temperature rise.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Catalytic Processes in Materials Science · Catalysis and Hydrodesulfurization Studies · Catalysis and Oxidation Reactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory Breeding Base for Green Chemistry Synthesis Technology, Research Center of Nano Science and Technology, Zhejiang University of Technology, Hangzhou 310032, China, and Energy Futures Laboratory, Department of Earth Science and Engineering, Faculty of Engineering, Imperial College London, London, SW7 2AZ, United Kingdom
References (25)
Show source-provided references
1. Lemaiter J. · J. Catal. · 1986 · 99 · 41510.1016/0021-9517(86)90366-0 ↗
2. Levy R. B. · Science · 1973 · 181 · 54710.1126/science.181.4099.547 ↗
3. Bohm H. · Nature · 1970 · 227 · 48410.1038/227483a0 ↗
4. Hudson M. J. · Ind. Eng. Chem. Res. · 2005 · 44 · 557510.1021/ie040247v ↗
5. York A. P. E. · Chem. Commun. · 1997 · 9
6. Hwu H. H. · J. Phys. Chem. B · 2003 · 107 · 202910.1021/jp0269118 ↗
7. Hwu H. H. · J. Phys. Chem. B · 2001 · 105 · 1003710.1021/jp0116196 ↗
8. Hwu H. H. · J. Phys. Chem. B · 2001 · 105 · 1004510.1021/jp0116205 ↗
9. Hu L. H. · J. Phys. Chem. B · 2007
10. Nakajima H. · Chem. Mater. · 1999 · 11 · 69110.1021/cm980544o ↗
11. Nartowski A. M. · J. Mater. Chem. · 1999 · 9 · 127510.1039/a808642g ↗
12. Shanmugam S. · J. Phys. Chem. B · 2005 · 109 · 1905610.1021/jp0540003 ↗
13. Chang Y. H. · J. Mater. Chem. · 2002 · 12 · 218910.1039/b203927c ↗
14. Nikolov I. · J. Power Sources · 1979 · 4 · 6510.1016/0378-7753(79)80038-5 ↗
15. Nikolov I. · J. Power Sources · 1980 · 5 · 19710.1016/0378-7753(80)80107-8 ↗
16. Shao H. F. · Ind. Eng. Chem. Res. · 2005 · 44 · 491410.1021/ie049186r ↗
17. Ross P. N. · J. Electroanal. Chem. · 1975 · 63 · 45010.1016/S0022-0728(75)80321-4 ↗
18. Xiao T. · Phys. Chem. Chem. Phys. · 2002 · 4 · 352210.1039/b202518c ↗
19. Lofberg A. · J. Catal. · 2000 · 189 · 17010.1006/jcat.1999.2692 ↗
20. Ma C. A. · Acta Chim. Sin. · 2005 · 63 · 1151
21. Li G. H. · Microporous Mesoporous Mater. · 2005 · 85 · 23410.1016/j.micromeso.2005.06.033 ↗
22. Ross P. N. · J. Catal. · 1975 · 39 · 29810.1016/0021-9517(75)90335-8 ↗
23. Asada N. · Met. Powder Rep. · 1990 · 45 · 6010.1016/S0026-0657(10)80020-7 ↗
24. Leclercq G. · J. Catal. · 1996 · 158 · 14210.1006/jcat.1996.0015 ↗
25. Alvarez-Merino M. A. · J. Catal. · 2000 · 192 · 36310.1006/jcat.2000.2842 ↗