Hydrolysis Improves Packing Density of Bromine-Terminated Alkyl-Chain, Silicon−Carbon Monolayers Linked to Silicon
Source abstract
Abstract
Bromine-terminated alkyl-chain monolayers, bound to oxide-free Si substrates, were prepared by self-assembly. Infrared spectroscopy and atomic force microscopy imply that monolayer packing density improves after hydrolysis, despite an increase in the presence of oxide. The probable reason is that OH-mediated intermolecular H-bonding along the monolayer emerges after hydrolysis and rearranges the molecular components of the insulating layer. Current−voltage and differential capacitance measurements show that also the interfacial electronic properties of these junctions are changed by hydrolysis of the Br groups. This is expressed in an increased effective Schottky barrier height and a decreased junction ideality factor. We correlate the proposed structural changes of the monolayer with the change in the interfacial electronic properties, with the help of the inhomogeneous Schottky barrier height model. The role of oxide in the charge transport through the monolayer is discussed, as well.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Molecular Junctions and Nanostructures · Semiconductor materials and devices · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials and Interfaces and Chemical Research Support, Weizmann Institute of Science, Rehovot, Israel 76100
References (49)
Show source-provided references
1. Alivisatos A. P. · Adv. Mater. · 1998 · 10 · 129710.1002/(SICI)1521-4095(199811)10:16<1297::AID-ADMA1297>3.0.CO;2-7 ↗
2. Ashkenasy G. · Acc. Chem. Res. · 2002 · 35 · 12110.1021/ar990047t ↗
3. Tour J. M. · Acc. Chem. Res. · 2000 · 33 · 79110.1021/ar0000612 ↗
4. Scott A. · Appl. Phys. Lett. · 2007 · 91
5. Aswal D. K. · Anal. Chim. Acta · 2006 · 568 · 8410.1016/j.aca.2005.10.027 ↗
6. Langner A. · J. Am. Chem. Soc. · 2005 · 127 · 1279810.1021/ja054634n ↗
7. Eves B. J. · Small · 2006 · 2 · 137910.1002/smll.200600103 ↗
8. Linford M. R. · J. Am. Chem. Soc. · 1993 · 115 · 1263110.1021/ja00079a071 ↗
9. Linford M. R. · J. Am. Chem. Soc. · 1995 · 117 · 314510.1021/ja00116a019 ↗
10. Seitz O. · Langmuir · 2006 · 22 · 691510.1021/la060718d ↗
11. Scheres L. · Langmuir · 2007 · 23 · 834310.1021/la701359k ↗
12. Green M. A. · Solid-State Electron. · 1974 · 17 · 55110.1016/0038-1101(74)90172-5 ↗
13. Salomon A. · Phys. Rev. Lett. · 2005 · 95
14. Maoz R. · Adv. Mater. · 2000 · 12 · 72510.1002/(SICI)1521-4095(200005)12:10<725::AID-ADMA725>3.0.CO;2-Z ↗
15. Asanuma H. · Electrochim. Acta · 2007 · 52 · 291310.1016/j.electacta.2006.08.060 ↗
16. While the Pauling-normalized group electronegativity of OH has been given as 3.4, compared to 3.5 for O and 2.8 for Br, in this case there are actual relevant experimental data, e.g., the dipole moment of bromoethane is 2.03 D, while that of ethanol is only 1.69 D.
17. Jin H. · Langmuir · 2004 · 20 · 625210.1021/la0496690 ↗
18. Huheey J. E. · 1983
19. XPS measurements at low sample-detector angles have shown increase of both Br 3d and O 1s intensities, implying on the appearance of both Br and OH groups on top of the molecules.
20. We relate the amount of oxygen on top of the monolayer before the hydrolysis to the high reactivity of the Br group as a good leaving group for nucleophylic substitution reactions.
21. Although the appearance of native oxide on Si−-H leads to a similar shift of the XPS Si 2p peak, in our case the amount of oxide changes only slightly after hydrolysis and, yet, the Si 2p peak shift is clear. Compare to ref22.
22. Webb L. J. · J. Phys. Chem. B · 2003 · 107 · 540410.1021/jp0222752 ↗
23. Faucheux N. · Biomaterials · 2004 · 25 · 272110.1016/j.biomaterials.2003.09.069 ↗
24. The presence of silicon oxide (as indicated in the XPS spectrum,Supporting Information,Figure SI-1) may contribute to the high thickness of the monolayer, as well.
25. Edwards N. V. V. J. · Mater. Res. Soc. Symp. Proc. · 2002 · 697 · 101
26. Daimay L. · 1991
27. Porter M. D. · J. Am. Chem. Soc. · 1987 · 109 · 355910.1021/ja00246a011 ↗
28. Ulman A. · 1991
29. Streitwieser A. · 1992
30. The silicon oxide is 6 (±1) % of the total coverage of the surface, as also agreed by XPS measurements.
31. The penetration of water and oxygen through the hydrophobic alkyl chain monolayer is less preferred than through the hydrophilic oxidized islands. Consequently, the oxide preferably grows in a lateral manner onto the silicon at the perimeter of the islands and around the islands, rather than in new locations below the bulk of the monolayer. In this way, the molecules in the periphery of the islands become less stable and can be disconnected under the alkaline conditions of the hydrolysis. The claim that molecules are less stable on oxidized silicon is easily demonstrated when immersing the silicon piece, covered with molecules, in HF solution for few minutes.
32. Rampi M. A. · Chem. Phys. · 2002 · 281 · 37310.1016/S0301-0104(02)00445-7 ↗
33. Salomon A. · Nano Lett. · 2006 · 6 · 287310.1021/nl062089y ↗
34. Sze S. M. · 1981
35. Faber E. J. · ChemPhysChem · 2005 · 6 · 215310.1002/cphc.200500120 ↗
36. Liu Y. J. · ChemPhysChem · 2003 · 4 · 33510.1002/cphc.200390059 ↗
37. Tung R. T. · Phys. Rev. B · 1992 · 45 · 1350910.1103/PhysRevB.45.13509 ↗
38. Tung R. T. · Mat. Sci. Eng. R · 2001 · 35 · 110.1016/S0927-796X(01)00037-7 ↗
39. We define as positive a dipole whose positive pole is the one closest to the semiconductor surface.
40. Note that n-type H-Si(111)/Hg contacts exhibited a nearly ohmic response at room temperature, with a very low SB. See ref41.
41. Maldonado S. · J. Phys. Chem. C · 2007 · 111 · 1769010.1021/jp070651i ↗
42. After 40 min of hydrolysis, though, the trend is turned over: the currents in reverse bias and in low forward biases increase in comparison to the 20 min hydrolyzed monolayers, which is more typical for charge transport through silicon oxide (see theSupporting Information,Figure SI-3). We assume that at this time scale of hydrolysis, the oxide in the layer becomes dominant in the charge transport.
43. We have also performed surface photovoltage (SPV) measurements on the Br-terminated monolayers before hydrolysis. Those measurements show only a small amount of band bending, despite the existence of an oxide. Comparing the SPV values of (non- hydrolyzed) Si−C11−Br with that of high quality Si−C12(with no SiO2), we get a lower value for the Si−C11−Br than for the Si−C12(70 vs 100 mV, respectively). This means that the contribution of oxide to the band bending is negligible and, surely, does not increase the band bending in our case.
44. Cohen R. · Chem. Phys. Lett. · 1997 · 279 · 27010.1016/S0009-2614(97)01070-1 ↗
45. Peor N. · J. Am. Chem. Soc. · 2008 · 130 · 415810.1021/ja077933g ↗
46. Cohen R. · J. Am. Chem. Soc. · 1999 · 121 · 1054510.1021/ja9906150 ↗
47. Thieblemont F. · Adv. Mater. · 2008 · 20 · 393110.1002/adma.200800659 ↗
48. Werner J. H. · J. Appl. Phys. · 1991 · 69 · 152210.1063/1.347243 ↗
49. Tulevski G. S. · J. Am. Chem. Soc. · 2004 · 126 · 1504810.1021/ja044101z ↗