Role of pH, Organic Additive, and Chelating Agent in Gel Synthesis and Fluorescent Properties of Porous Monolithic Alumina
Source abstract
Abstract
This work demonstrates the synthesis of porous monolithic α-alumina by a modified polyacrylamide gel route at different reaction parameters. Various Al 2 O 3 phases are synthesized by a modified polyacrylamide gel route using different organic additives and solutions with different pH values (3, 7, and 11). After calcination at 1150 °C, the pure α-Al 2 O 3 is obtained at pH = 3 and 7 while there is still θ-Al 2 O 3 at pH = 11. The organic additive has nothing to do with the purity of α-Al 2 O 3 phase. The scanning electron microscopic images indicate that the pore size and morphology of the samples depend on the choice of organic additive and pH value. The photoluminescence spectra show that two emission peaks located at 330 and 368 nm are observed when the excitation wavelength is 228 nm. Interestingly, the intensity of emission peak at 368 nm decreases with the decrease of full width at half-maximum or pore size.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Anodic Oxide Films and Nanostructures · Mesoporous Materials and Catalysis · Aerogels and thermal insulation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Physical Electronics, University of Electronic Science and Technology of China, Sichuan, Chengdu, 610054, China
Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang 621900, China
References (31)
Show source-provided references
1. Zhang Y. · Catal. Lett. · 2009 · 127 · 33910.1007/s10562-008-9686-z ↗
2. Liang C. D. · Anal. Chem. · 2003 · 75 · 490410.1021/ac030146r ↗
3. Kim Y. · Environ. Sci. Technol. · 2004 · 38 · 92410.1021/es0346431 ↗
4. Bing Z. · Electrochem. Solid-State Lett. · 2006 · 9 · A10110.1149/1.2159297 ↗
5. Hornyak G. L. · J. Phys. Chem. B · 1997 · 101 · 154810.1021/jp962685o ↗
6. Masuda H. · Science · 1995 · 268 · 146610.1126/science.268.5216.1466 ↗
7. Maekawa H. · Adv. Mater. · 2003 · 15 · 59110.1002/adma.200304248 ↗
8. Ma X. · J. Mater. Sci. · 2008 · 43 · 88710.1007/s10853-007-2189-2 ↗
9. Li F. · Langmuir · 2007 · 23 · 399610.1021/la062969s ↗
10. Alvarez S. · Adv. Eng. Mater. · 2004 · 6 · 89710.1002/adem.200400109 ↗
11. Lu A. H. · Microporous Mesoporous Mater. · 2004 · 72 · 5910.1016/j.micromeso.2004.04.011 ↗
12. Tonanon N. · Carbon · 2005 · 43 · 280810.1016/j.carbon.2005.05.026 ↗
13. Bil M. · J. Mater. Sci. · 2009 · 44 · 146910.1007/s10853-008-3037-8 ↗
14. Zhang Y. · J. Mater. Sci. · 2009 · 44 · 93110.1007/s10853-008-3189-6 ↗
15. Liu Q. · Microporous Mesoporous Mater. · 2006 · 92 · 1010.1016/j.micromeso.2005.12.012 ↗
16. Han D. · Microporous Mesoporous Mater. · 2012 · 158 · 110.1016/j.micromeso.2012.03.022 ↗
17. Pines H. · J. Am. Chem. Soc. · 1960 · 82 · 247110.1021/ja01495a021 ↗
18. Narula C. K. · Chem. Mater. · 1996 · 8 · 98410.1021/cm950588m ↗
19. Zhang Z. · J. Am. Chem. Soc. · 2002 · 124 · 159210.1021/ja016974o ↗
20. Bian S. W. · Microporous Mesoporous Mater. · 2010 · 131 · 28910.1016/j.micromeso.2010.01.004 ↗
21. Tokudome Y. · Chem. Mater. · 2007 · 19 · 339310.1021/cm063051p ↗
22. Wang S. F. · Ceram. Int. · 2013 · 39 · 294310.1016/j.ceramint.2012.09.068 ↗
23. Sung Lee J. · Ceram. Int. · 2012 · 38 · 668510.1016/j.ceramint.2012.05.057 ↗
24. Ozensoy E. · J. Phys. Chem. B · 2005 · 109 · 343110.1021/jp0449206 ↗
25. Yu Z. Q. · J. Lumin. · 2002 · 99 · 2910.1016/S0022-2313(02)00320-4 ↗
26. Yang H. · Mater. Lett. · 2009 · 63 · 65510.1016/j.matlet.2008.12.013 ↗
27. Tanaka T. · Sci. Am. · 1981 · 244 · 12410.1038/scientificamerican0181-124 ↗
28. Gitzen W. H. · 1970
29. Evans B. D. · Phys. Rev. B · 1978 · 18 · 708910.1103/PhysRevB.18.7089 ↗
30. Lee K. H. · Phys. Rev. B · 1979 · 19 · 321710.1103/PhysRevB.19.3217 ↗
31. Toshima R. · J. Nucl. Sci. Technol. · 2002 · 39 · 1510.1080/18811248.2002.9715152 ↗