Improved Efficiency in Poly(3-hexylthiophene)/Zinc Oxide Solar Cells via Lithium Incorporation
Source abstract
Abstract
The efficiency of poly(3-hexylthiophene)/zinc oxide planar heterojunction solar cells is on average raised by a factor of 2.9 by incorporating lithium during the sol−gel processing of the metal oxide layer. Studies performed on over 300 diodes show systematic increases in both open-circuit voltage ( V oc ) and short-circuit current ( J sc ) up to an optimum Li concentration between 15 and 20 atom %. Compared to pure ZnO devices, the incorporation of lithium improves the V oc and J sc by an average of 42 and 90%, respectively. For the best device, the efficiency increases by a factor of 7.5, yielding a power conversion efficiency of 0.44%, which is approaching the efficiency of the state-of-the-art nanostructured hybrid solar cells. Enhancements in V oc are attributed to a larger donor−acceptor energy band edge offset due to a rigid shift of Zn 1− x Li x O energy levels toward to the vacuum level with Li incorporation. J sc improvements arise from a higher surface roughness with lithium incorporation and from better P3HT ordering at the heterojunction interface.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Perovskite Materials and Applications · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Sandia National Laboratories, Albuquerque, New Mexico 87185
National Institute of Standards and Technology, Gaithersburg, Maryland 20899
Stanford Synchrotron Radiation Laboratory, Menlo Park, California 94025
References (23)
Show source-provided references
1. Olson D. · Thin Solid Films · 2006 · 496 · 2610.1016/j.tsf.2005.08.179 ↗
2. Lee Y.-J. · J. Phys. Chem. C · 2009 · 113 · 1577810.1021/jp904387z ↗
3. Goh C. · J. Appl. Phys. · 2007 · 101 · 11450310.1063/1.2737977 ↗
4. Monson T. · Adv. Mater. · 2008 · 20 · 475510.1002/adma.200801082 ↗
5. Hau S. · Appl. Phys. Lett. · 2008 · 93 · 23330410.1063/1.3028094 ↗
6. Spoerke E. D. · Appl. Phys. Lett. · 2009
7. Greene L. · J. Phys. Chem. C · 2007 · 111 · 1845110.1021/jp077593l ↗
8. Chan C. K. · Appl. Phys. Lett. · 2009 · 94 · 20330610.1063/1.3138131 ↗
9. Olson D. · Adv. Funct. Mater. · 2007 · 17 · 26410.1002/adfm.200600215 ↗
10. Lloyd M. T. · J. Mater. Chem. · 2009 · 19 · 460910.1039/b903849c ↗
11. Piris J. · Adv. Funct. Mater. · 2007 · 17 · 384910.1002/adfm.200700305 ↗
12. Lin Y.-H. · J. Appl. Phys. · 2006 · 99 · 056107−056103
13. Onodera A. · Jpn. J. Appl. Phys., Part 1 · 1996 · 35 · 516010.1143/JJAP.35.5160 ↗
14. Melgarejo R. E. · Mater. Res. Soc. Symp. Proc. · 2002
15. Sze S. M. · 1981
16. Oshikiri M. · Physica A · 2001 · 298 · 47210.1016/S0921-4526(01)00365-9 ↗
17. Özgür Ü. · J. Appl. Phys. · 2005 · 98 · 04130110.1063/1.1992666 ↗
18. Rand B. P. · Phys. Rev. B · 2007 · 75 · 11532710.1103/PhysRevB.75.115327 ↗
19. Scharber M. C. · Adv. Mater. · 2006 · 18 · 78910.1002/adma.200501717 ↗
20. Jeong S. H. · Thin Solid Films · 2008 · 516 · 558610.1016/j.tsf.2007.07.075 ↗
21. Kline R. J. · Nat. Mater. · 2006 · 5 · 22210.1038/nmat1590 ↗
22. Quist P. A. C. · J. Phys. Chem. B · 2006 · 110 · 1031510.1021/jp055492m ↗
23. Beek W. J. E. · Adv. Funct. Mater. · 2006 · 16 · 111210.1002/adfm.200500573 ↗