journal article·2009-10-29

Stability Enhancement in Ni-Promoted Cu−Fe Spinel Catalysts for Dimethyl Ether Steam Reforming

Kajornsak Faungnawakij, Ryuji Kikuchi, Tetsuya Fukunaga, Koichi Eguchi

The Journal of Physical Chemistry C· Volume 113· Issue 43
Publisher page

Abstract

Effects of Ni doping on the catalytic behavior of Cu x Ni 1− x Fe 2 O 4 ( x = 1, 0.95, 0.90, 0.50) mixed with Al 2 O 3 were investigated in steam reforming of dimethyl ether for hydrogen production. The stability of the catalyst was significantly enhanced by doping Ni species to CuFe 2 O 4 . Formation of CuNi alloy was confirmed as the amount of Ni addition increased. The suppression of the sintering rate was clearly evidenced over Ni-doped catalysts as compared with the undoped one, while the effect on carbon deposition rate was unclear. Nevertheless, an increasing amount of Ni dopant to Cu−Fe spinel retarded the conversion of dimethyl ether and led to high selectivity to CH 4 and CO.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Catalysts for Methane Reforming · Catalytic Processes in Materials Science · Catalysis and Oxidation Reactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

National Nanotechnology Center (NANOTEC), National Science and Technology Development Agency, 111 Thailand Science Park, Patumthani 12120, Thailand, Department of Chemical System Engineering, School of Engineering, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656, Japan, Central Research Laboratories, Idemitsu Kosan Co., Ltd., Chiba 299-0293, Japan, and Department of Energy and Hydrocarbon Chemistry, Graduate School of Engineering, Kyoto University, Nishikyo-ku, Kyoto 615-8510, Japan

References (21)

Show source-provided references
1. Milt V. G. · Appl. Catal., B · 2005 · 57 · 1310.1016/j.apcatb.2004.09.022 ↗
2. Kim D. H. · J. Phys. Chem. C · 2009 · 113 · 733610.1021/jp900304h ↗
3. Stambouli A. B. · Renewable Sustainable Energy Rev. · 2002 · 6 · 29510.1016/S1364-0321(01)00015-6 ↗
4. Semelsberger T. A. · J. Power Sources · 2006 · 156 · 49710.1016/j.jpowsour.2005.05.082 ↗
5. Faungnawakij K. · Appl. Catal., A · 2006 · 304 · 4010.1016/j.apcata.2006.02.021 ↗
6. Ishikawa A. · Chem. Commun. · 2007 · 299210.1039/b702693e ↗
7. Fatsikostas A. N. · J. Catal. · 2004 · 225 · 43910.1016/j.jcat.2004.04.034 ↗
8. Xing Y. · Chem. Mater. · 2007 · 19 · 482010.1021/cm0712570 ↗
9. Koós Á. · J. Phys. Chem. C · 2008 · 112 · 260710.1021/jp710015d ↗
10. Semelsberger T. A. · Appl. Catal., B · 2006 · 65 · 29110.1016/j.apcatb.2006.02.015 ↗
11. Faungnawakij K. · Appl. Catal., A · 2007 · 333 · 11410.1016/j.apcata.2007.09.014 ↗
12. Nilsson M. · Appl. Catal., B · 2007 · 76 · 4210.1016/j.apcatb.2007.05.011 ↗
13. Faungnawakij K. · J. Catal. · 2008 · 256 · 3710.1016/j.jcat.2008.02.022 ↗
14. Faungnawakij K. · Angew. Chem., Int. Ed. · 2008 · 120 · 945410.1002/ange.200802809 ↗
15. Naghash A. R. · Chem. Mater. · 2006 · 18 · 248010.1021/cm051910o ↗
16. Arai N. · Catal. Today · 2007 · 129 · 40710.1016/j.cattod.2006.08.072 ↗
17. Devi L. G. · J. Phys. Chem. C · 2009 · 113 · 1559310.1021/jp903711a ↗
18. Eguchi K. · Appl. Catal., B · 2008 · 80 · 15610.1016/j.apcatb.2007.11.020 ↗
19. Nishiguchi T. · Appl. Catal., A · 2006 · 301 · 6610.1016/j.apcata.2005.11.011 ↗
20. Kawabata T. · Appl. Catal., A · 2006 · 308 · 8210.1016/j.apcata.2006.04.032 ↗
21. Carrero A. · Appl. Catal., A · 2007 · 327 · 8210.1016/j.apcata.2007.04.030 ↗