Source abstract
Abstract
Using density functional theory calculations, we simulated the substitution of silicon by copper in Ti 3 SiC 2 with the formation of Ti 3 Si 1– x Cu x C 2 ( x = 0.0; 0.125; 0.25; 0.5; 0.75; 0.875; 1.0). We found that the Si–Cu substitution was possible up to half, with the formation of Ti 3 Si 0.5 Cu 0.5 C 2 . The elastic matrices for Ti 3 SiC 2, Ti 3 Si 0.5 Cu 0.5 C 2, and Ti 3 CuC 2 were calculated to determine the effect of substitution on the mechanical properties of the materials. It has been confirmed that the presence of copper leads to a decrease in elastic moduli and an increase in thermal resistivity. In this regard, Ti 3 Si 0.5 Cu 0.5 C 2 may be a promising thermal barrier coating material with a thermal conductivity of about 1.6 W m –1 K –1 . According to the electronic structure, both compounds have zero band gaps. In addition, an attempt to synthesize the Ti 3 Si 1– x Cu x C 2 material was carried out using high-temperature self-propagating synthesis. As a result, a sample with more than 70% yield of Ti 3 SiC 2 content was obtained through rapid and environmentally friendly synthesis, and then a 20% yield of Ti 3 Si 0.929 Cu 0.071 C 2 composition was achieved, which was confirmed by the X-ray diffraction and energy-dispersive X-ray spectroscopy investigations.
Source: openalex_inverted_index · Quality: baseline
Affiliations
Samara State Technical University, Molodogvardeyskaya St. 244, Samara 443100, Russia
Laboratory of Nature-Inspired Technologies and Environmental Safety of the Arctic, Nanomaterial Research Center of the Kola Science Centre, Russian Academy of Sciences. Fersmana St. 14, Apatity 184209, Russia
Samara State Medical University, Chapayevskaya St. 89, Samara 443099, Russia
Samara Branch of the Lebedev Physical Institute, Novo-Sadovaya St. 221, Samara 443011, Russia
Funding
Russian Science Foundation · Ministry of Education and Science of the Russian Federation