Novel mechanism of ultra-high adiabatic shear susceptibility in FCC-based high-entropy alloys via high-content nanoprecipitate dissolution
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (96)
Show source-provided references
1. Effect of strain rate upon plastic flow of steel10.1063/1.1707363 ↗
2. Temperature rise associated with adiabatic shear band: causality clarified10.1103/PhysRevLett.122.015503 ↗
3. Shear localization in dynamic deformation: microstructural evolution10.1007/s11661-007-9431-z ↗
4. Meyers · 1994
5. Shear localization in metallic materials at high strain rates
6. Catastrophic thermoplastic shear10.1115/1.3629585 ↗
7. An experimental and numerical study of the localization behavior of tantalum and stainless steel10.1016/j.ijplas.2005.10.002 ↗
8. Microvoid formation during shear deformation of ultrahigh strength steels10.1007/BF02647501 ↗
9. Dynamic deformation and failure of ultrafine-grained titanium10.1016/j.actamat.2016.11.041 ↗
10. Adiabatic shear bands in titanium and titanium alloys: a critical review10.1016/0261-3069(93)90078-A ↗
11. Adiabatic shear localization induced by dynamic recrystallization in an FCC high entropy alloy10.1016/j.ijplas.2023.103550 ↗
12. Cross-kinks control screw dislocation strength in equiatomic bcc refractory alloys10.1016/j.actamat.2021.116875 ↗
13. Enhanced mobility of dislocation network nodes and its effect on dislocation multiplication and strain hardening10.1016/j.actamat.2024.119884 ↗
14. Unstable stacking fault energy and Peierls stress for evaluating slip system competition in body-centered cubic metals10.1016/j.jmrt.2022.12.162 ↗
15. Deciphering the multiple deformation mechanisms responsible for sustained work hardening in a FeCrCoNi medium entropy alloy10.1016/j.ijplas.2023.103663 ↗
16. Inherent and multiple strain hardening imparting synergistic ultrahigh strength and ductility in a low stacking faulted heterogeneous high-entropy alloy10.1016/j.actamat.2022.118516 ↗
17. Effect of microstructure on the nucleation and initiation of adiabatic shear bands (ASBs) during impact10.1016/j.msea.2014.07.095 ↗
18. “Self-sharpening” tungsten high-entropy alloy10.1016/j.actamat.2020.01.005 ↗
19. Enhanced dynamic mechanical properties and resistance to the formation of adiabatic shear band by Cu-rich nano-precipitates in high-strength steels10.1016/j.ijplas.2020.102924 ↗
20. Towards the work hardening and strain delocalization achieved via in-situ intragranular reinforcement in Al-CuO composite10.1016/j.actamat.2023.119110 ↗
21. Mechanical behavior of high-entropy alloys10.1016/j.pmatsci.2021.100777 ↗
22. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
23. Mechanical behavior of a DD5 single crystal superalloy with different misorientations under quasi-static and dynamic compression10.1557/jmr.2018.251 ↗
24. Dynamic compressive behavior of a single crystal nickel-base superalloy at ultra-high temperature: mechanism investigation with a modified electric synchronous SHPB technique10.1016/j.jmrt.2022.02.121 ↗
25. A review on the dynamic-mechanical behaviors of high-entropy alloys10.1016/j.pmatsci.2023.101090 ↗
26. Compression properties and impact energy release characteristics of TiZrNbV high-entropy alloy10.1016/j.msea.2021.142074 ↗
27. Towards stacking fault energy engineering in FCC high entropy alloys10.1016/j.actamat.2021.117472 ↗
28. A “local” stacking fault energy model for concentrated alloys10.1016/j.actamat.2022.118165 ↗
29. Stacking fault energies of face-centered cubic concentrated solid solution alloys10.1016/j.actamat.2017.05.001 ↗
30. High-velocity deformation of Al0.3CoCrFeNi high-entropy alloy: remarkable resistance to shear failure
31. Adiabatic shear localization in the CrMnFeCoNi high-entropy alloy10.1016/j.actamat.2018.03.040 ↗
32. High-speed perforation of high-entropy alloy CrMnFeCoNi plates: experiments and modeling
33. Dynamic tension and constitutive model in Fe40Mn20Cr20Ni20 high-entropy alloys with a heterogeneous structure
34. Enhanced dynamic deformability and strengthening effect via twinning and microbanding in high density NiCoFeCrMoW high-entropy alloys10.1016/j.jmst.2022.02.055 ↗
35. High-content ductile coherent nanoprecipitates achieve ultrastrong high-entropy alloys10.1038/s41467-018-06600-8 ↗
36. Dynamic response and adiabatic shear behavior of β-type Ti–Mo alloys with different deformation modes10.1016/j.msea.2022.144108 ↗
37. Microstructural evolution in adiabatic shear bands in Ta and Ta–W alloys10.1016/S1359-6454(01)00215-4 ↗
38. Flow stress of commercially pure niobium over a broad range of temperatures and strain rates10.1016/S0921-5093(00)00740-1 ↗
39. Adiabatic shear localization in a near beta Ti–5Al–5Mo–5V–1Cr–1Fe alloy10.1016/j.msea.2015.05.043 ↗
40. Effect of microstructure on the mechanical properties of Ti–5Al–5Mo–5V–1Cr–1Fe alloy10.1016/j.msea.2019.138728 ↗
41. EBSD characterization of dynamic shear band regions in pre-shocked and as-received 304 stainless steels10.1016/j.msea.2007.04.048 ↗
42. Effect of strain rate on quasistatic tensile flow behaviour of solution annealed 304 austenitic stainless steel at room temperature10.1007/s10853-010-4605-2 ↗
43. Difference in adiabatic shear susceptibility between pure copper and Cu–30 % Zn solid solution alloy at different strain rate10.1557/s43578-023-00900-6 ↗
44. Strain-rate effects in metals at large shear strains
45. An experimental method of measuring the quasi-static and dynamic confined behaviour of PMMA
46. Influence of size effect on the dynamic mechanical properties of OFHC copper at micro-/meso-scales10.1007/s00170-022-08674-7 ↗
47. Effect of strain on microstructure evolution of 1Cr18Ni9Ti stainless steel during adiabatic shearing10.1007/s11665-015-1776-7 ↗
48. Multiple strengthening sources and adiabatic shear banding during high strain-rate deformation of AISI 321 austenitic stainless steel: effects of grain size and strain rate10.1016/j.msea.2017.11.045 ↗
49. Effects of grain refinement on the quasi-static compressive behavior of AISI 321 austenitic stainless steel: EBSD, TEM, and XRD studies10.1016/j.ijplas.2018.03.014 ↗
50. Experimental and theoretical study of mechanical behavior of 1100 aluminum in the strain rate range 10-5-104 s-110.1016/0749-6419(92)90057-J ↗
51. Dynamic deformation response of a high-strength, high-toughness Fe-10Ni-0.1C steel10.1016/j.msea.2009.04.063 ↗
52. Deciphering the microstructural evolution and adiabatic shearing behavior of the titanium alloy with stress-induced ω phase transformation during dynamic compression10.1016/j.matdes.2022.110939 ↗
53. The evolution of adiabatic shear band in high Co–Ni steel during high strain-rate compression10.1016/j.msea.2022.144173 ↗
54. Suppression of adiabatic shear band formation by martensitic transformation of retained austenite during split Hopkinson pressure bar test for a high-strength bainitic steel10.1016/j.msea.2021.141127 ↗
55. Mechanical and microstructural properties of 2024-T351 aluminium using a hat-shaped specimen at high strain rates10.1016/j.msea.2018.02.049 ↗
56. Plastic deformation of 2024-T351 aluminum plate over a wide range of loading conditions10.1016/j.ijsolstr.2013.02.006 ↗
57. Microstructural characteristics and formation mechanism of adiabatic shear bands in Al–Zn–Mg–Cu alloy under dynamic shear loading10.1016/j.msea.2020.139430 ↗
58. Anisotropic low cycle behavior of the extruded 7075 al alloy10.3390/ma14164506 ↗
59. Adiabatic shear localization in the dynamic punch test, part I: experimental investigation10.1016/S0749-6419(98)00069-2 ↗
60. In Situ observation of adiabatic shear band formation in aluminum alloys10.1007/s11340-019-00544-w ↗
61. Two-dimensional evolution of temperature and deformation fields during dynamic shear banding: In-situ experiments and modeling10.1016/j.ijplas.2023.103782 ↗
62. Precipitation and micromechanical behavior of the coherent ordered nanoprecipitation strengthened Al-Cr-Fe-Ni-V high entropy alloy10.1016/j.actamat.2021.117121 ↗
63. Dynamic recrystallization in high-strain, high-strain-rate plastic deformation of copper10.1016/0956-7151(94)90417-0 ↗
64. The relation between adiabatic shear instability strain and material properties10.1016/0001-6160(81)90151-6 ↗
65. Mechanical properties of Nb25Mo25Ta 25W25 and V20Nb20Mo 20Ta20W20 refractory high entropy alloys10.1016/j.intermet.2011.01.004 ↗
66. Thermo-mechanical cyclic hardening behavior of 304 stainless steel at large temperature ranges: experiments and simulations10.1016/j.ijmecsci.2017.06.018 ↗
67. Predicting temperature-dependent ultimate strengths of body-centered-cubic (BCC) high-entropy alloys10.1038/s41524-021-00623-4 ↗
68. Yield strength of molybdenum, tantalum and tungsten at high strain rates and very high temperatures10.1016/j.jnucmat.2012.03.044 ↗
69. Dynamic compressive properties and underlying failure mechanisms of selective laser melted Ti-6Al-4V alloy under high temperature and strain rate conditions
70. An experimental study of the formation process of adiabatic shear bands in a structural steel10.1016/0022-5096(88)90012-9 ↗
71. Revisiting the hot adiabatic shear band paradigm10.1016/j.ijimpeng.2023.104702 ↗
72. Strain effect on the γ′ dissolution at high temperatures of a nickel-based single crystal superalloy10.1007/s11661-012-1397-9 ↗
73. Diffusion in Al-Ni and Al-NiCr interfaces at moderate temperatures
74. Hierarchical nanostructure stabilizing high content coherent nanoprecipitates in Al-Cr-Fe-Ni-V high-entropy alloy10.1016/j.jmst.2024.02.045 ↗
75. The growth of γ′ precipitates in nickel-base superalloys10.1016/0001-6160(83)90062-7 ↗
76. Nucleation and growth of precipitates in a Ni-based superalloy
77. W.A. Soffa, David E. Laughlin, in Physical metallurgy (Fifth Edition), 2014.
78. On the modelling of precipitation kinetics in a turbine disc nickel based superalloy10.1016/j.actamat.2020.03.058 ↗
79. Investigation of microstructures and high-temperature tensile behavior of heat treated GTD222 nickel-based superalloy prepared by selective laser melting10.1016/j.jmrt.2023.12.046 ↗
80. Recent developments in nickel-based superalloys for gas turbine applications: review10.1016/j.jallcom.2023.171128 ↗
81. On the kinetics of precipitate dissolution10.1179/030634568790443170 ↗
82. 3D stochastic bicontinuous microstructures: generation, topology and elasticity10.1016/j.actamat.2018.01.005 ↗
83. Topology evolution during coarsening of nanoscale metal network structures
84. H.O.K. Kirchner, Coarsening of grain-boundary precipitates, 2 (1971) 2861–2864.10.1007/BF02813264 ↗
85. Application of atom probe tomography in understanding high entropy alloys: 3D local chemical compositions in atomic scale analysis10.1016/j.pmatsci.2021.100854 ↗
86. The mechanism of morphogenesis in a phase-separating concentrated multicomponent alloy10.1038/nmat1845 ↗
87. Elemental phase partitioning in the γ - γ" Ni2CoFeCrNb0.15 high entropy alloy10.3390/e20120910 ↗
88. Effect of Ti/Al ratio on the elemental partitioning in the face-centered cubic-based γ-γ′ dual-phase high entropy alloy studied by atom probe tomography10.3389/fmats.2022.806237 ↗
89. Evolution of the γ/γ′ interface width in a commercial nickel base superalloy studied by three-dimensional atom probe tomography10.1016/j.scriptamat.2009.03.011 ↗
90. Enhanced diffusion during plastic deformation by mechanical diffusion10.1063/1.1709056 ↗
91. Diffusive transformation at high strain rate: on instantaneous dissolution of precipitates in aluminum alloy during adiabatic shear deformation10.1557/jmr.2016.151 ↗
92. Microstructure evolution within adiabatic shear band in peak aged ZK60 magnesium alloy10.1016/j.msea.2017.10.111 ↗
93. Study on the microstructural characteristics of adiabatic shear band in solid-solution treated ZK60 magnesium alloy10.1016/j.matchar.2019.109840 ↗
94. Fast parallel algorithms for short-range molecular dynamics10.1006/jcph.1995.1039 ↗
95. Atomistic modeling of the γ and γ′-phases of the Ni-Al system10.1016/j.actamat.2003.11.026 ↗
96. Modeling the dynamic recrystallization under multi-stage hot deformation10.1016/j.actamat.2004.06.022 ↗