journal article·2024-03-07

Unraveling the Enhanced N2 Activity on CuNi Alloy Catalysts for Ammonia Production: Experiments, DFT, and Statistical Analysis

Parastoo Agharezaei, Noguchi Goroh Tomohiro, Hirokazu Kobayashi, Hartmut Schlenz, Miho Yamauchi, Kulbir Kaur Ghuman

Publisher page

Abstract

One of the main challenges in designing catalysts for ammonia synthesis is to create active sites on the surface of the catalyst that prefers to reduce the strong N 2 molecule despite its highly stable structure. Binary alloys have been demonstrated as potential ammonia synthesis catalysts in the literature. However, for binary alloys to be commercially viable, one needs to improve their catalytic activity for N 2 reduction by strategically manipulating the several unique active sites present on their surface. Herein, by using computational tools, we created five different compositions of Cu x Ni 1– x (0.5 ≤ x ≤ 0.9) alloys via special quasi-random structure (SQS) and genetic algorithm (GA). The alloy with about 50% of Cu and 50% of Ni is predicted to have the highest catalytic activity based on the shift of the d-band center toward the Fermi level. We then synthesized MgO-supported Cu 0.5 Ni 0.5 nanoparticles and compared their activity for ammonia synthesis with that of Ni/MgO and Cu/MgO. It was found that the MgO-supported Cu 0.5 Ni 0.5 alloy possesses 21 times higher activity than Cu/MgO and 3 times higher than Ni/MgO for ammonia synthesis, confirming the computational results. To demonstrate the impact of alloying on the catalytic activity, we further investigated all the possible unique sites on the surface of the Cu 0.5 Ni 0.5 alloy for nitrogen reduction reaction (NRR) via density functional theory (DFT). The investigation of the 96 unique active sites on the Cu 0.5 Ni 0.5 surface demonstrated that the position and concentration of Ni atoms near each investigated adsorption site have a linear correlation with the adsorption energy of the N 2 . Along with the structural and electronic properties of the active sites modified by Ni, orientation of the N 2 molecule also plays an important role in determining the activity of the CuNi catalyst. These findings not only explained the notable increase in the activity of CuNi catalysts compared to the pure metals for NH 3 synthesis but also offered critical insights required to tailor the specific surface environment of CuNi catalysts for NRR. This knowledge can serve as a foundation for further developments in designing binary alloy catalysts for sustainable ammonia synthesis.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Ammonia Synthesis and Nitrogen Reduction · Caching and Content Delivery · Nanomaterials for catalytic reactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institut National de la Recherché, Centre Énergie Matériaux Télécommunications, 1650 Boul. Lionel-Boulet, Varennes, Quebec J3X 1S2, Canada

Intsitute for Materials Chemistry and Engineering, Kyushu University, 744 Motooka Nishi-ku Fukuoka, Kyushu 819-0395, Japan

Forschungszentrum Juelich, Institute of Energy and Climate Research (IEK), IEK-1: Materials Synthesis and Processing, Wilhelm-Johnen-Strasse, D-52425 Juelich, Germany

Division of Geochemistry and Petrology, Institute of Geoscience, University of Bonn, Meckenheimer Allee 139, D-53115 Bonn, Germany

Research Center for Negative Emission Technologies, Kyushu University, 744 Motooka Nishi-ku Fukuoka, Kyushu 819-0395, Japan

Advanced Institute for Materials Research (WPI-AIMR), Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai 980-8577, Japan

Funding

Ministry of Education, Culture, Sports, Science and Technology · Canada Foundation for Innovation · Compute Canada · Canada Research Chairs · Japan Society for the Promotion of Science · Natural Sciences and Engineering Research Council of Canada · Mitacs

References (64)

Show source-provided references
1. 10.1021/acs.iecr.2c0063110.1021/acs.iecr.2c00631 ↗
2. 10.1126/science.aar661110.1126/science.aar6611 ↗
3. 10.1016/j.ccr.2013.02.01010.1016/j.ccr.2013.02.010 ↗
4. 10.1006/jcat.2000.308710.1006/jcat.2000.3087 ↗
5. 10.1016/j.cplett.2014.03.00310.1016/j.cplett.2014.03.003 ↗
6. 10.1021/acs.jpclett.2c0245910.1021/acs.jpclett.2c02459 ↗
7. 10.1021/acssuschemeng.7b0371910.1021/acssuschemeng.7b03719 ↗
8. 10.1021/acssuschemeng.2c0091410.1021/acssuschemeng.2c00914 ↗
9. 10.1021/acscatal.8b0014510.1021/acscatal.8b00145 ↗
10. 10.1007/s10562-014-1226-410.1007/s10562-014-1226-4 ↗
11. 10.1002/cctc.20200114110.1002/cctc.202001141 ↗
12. 10.1016/S1872-2067(14)60118-210.1016/S1872-2067(14)60118-2 ↗
13. 10.1021/j100281a03010.1021/j100281a030 ↗
14. 10.1021/acscatal.1c0517410.1021/acscatal.1c05174 ↗
15. 10.1039/D1TA02720D10.1039/D1TA02720D ↗
16. 10.1126/science.aad499810.1126/science.aad4998 ↗
17. 10.1021/acs.jpcc.1c1048410.1021/acs.jpcc.1c10484 ↗
18. 10.1039/C8CP05800H10.1039/C8CP05800H ↗
19. 10.1016/j.apcata.2018.06.01710.1016/j.apcata.2018.06.017 ↗
20. 10.1021/jacs.8b1049910.1021/jacs.8b10499 ↗
21. 10.1038/s41467-019-11848-910.1038/s41467-019-11848-9 ↗
22. 10.1021/acs.jpclett.1c0124210.1021/acs.jpclett.1c01242 ↗
23. 10.1021/acssuschemeng.1c0403110.1021/acssuschemeng.1c04031 ↗
24. 10.1021/acssuschemeng.1c0127510.1021/acssuschemeng.1c01275 ↗
25. 10.1021/acssuschemeng.1c0046810.1021/acssuschemeng.1c00468 ↗
26. 10.1021/acscatal.0c0507410.1021/acscatal.0c05074 ↗
27. 10.1021/acs.chemrev.5b0048210.1021/acs.chemrev.5b00482 ↗
28. 10.1038/nchem.12110.1038/nchem.121 ↗
29. 10.1021/jacs.9b1334710.1021/jacs.9b13347 ↗
30. 10.1016/j.calphad.2013.06.00610.1016/j.calphad.2013.06.006 ↗
31. 10.1103/PhysRevB.61.597210.1103/PhysRevB.61.5972 ↗
32. 10.3389/fmats.2017.0003610.3389/fmats.2017.00036 ↗
33. 10.1039/jr951000164010.1039/jr9510001640 ↗
34. 10.1039/C1CP22271F10.1039/C1CP22271F ↗
35. 10.1039/c1cp20547a10.1039/c1cp20547a ↗
36. 10.1016/j.jcat.2014.12.03310.1016/j.jcat.2014.12.033 ↗
37. Liu H. · 201310.1142/8199 ↗
38. 10.1002/aesr.20200004310.1002/aesr.202000043 ↗
39. 10.1038/s41929-018-0092-710.1038/s41929-018-0092-7 ↗
40. 10.1088/1361-648X/ab400710.1088/1361-648X/ab4007 ↗
41. 10.1016/j.commatsci.2022.11183310.1016/j.commatsci.2022.111833 ↗
42. 10.1016/S0364-5916(02)80006-210.1016/S0364-5916(02)80006-2 ↗
43. 10.1016/j.calphad.2008.12.00510.1016/j.calphad.2008.12.005 ↗
44. 10.1088/0953-8984/21/39/39550210.1088/0953-8984/21/39/395502 ↗
45. 10.1088/1361-648X/aa8f7910.1088/1361-648X/aa8f79 ↗
46. 10.1103/PhysRevLett.77.386510.1103/PhysRevLett.77.3865 ↗
47. 10.1038/s41524-018-0127-210.1038/s41524-018-0127-2 ↗
48. 10.1002/jcc.2049510.1002/jcc.20495 ↗
49. 10.1006/jcph.1996.561210.1006/jcph.1996.5612 ↗
50. 10.1103/PhysRevB.13.518810.1103/PhysRevB.13.5188 ↗
51. 10.1016/j.commatsci.2005.04.01010.1016/j.commatsci.2005.04.010 ↗
52. 10.1088/0953-8984/21/8/08420410.1088/0953-8984/21/8/084204 ↗
53. 10.1021/jp411763k10.1021/jp411763k ↗
54. Haynes W. M. · 2012
55. 10.1016/j.commatsci.2012.10.02810.1016/j.commatsci.2012.10.028 ↗
56. 10.1063/1.132967210.1063/1.1329672 ↗
57. 10.1016/j.apcatb.2013.11.03110.1016/j.apcatb.2013.11.031 ↗
58. 10.1016/j.apcatb.2016.10.03810.1016/j.apcatb.2016.10.038 ↗
59. 10.1021/acsnano.1c0782510.1021/acsnano.1c07825 ↗
60. 10.1073/pnas.100665210810.1073/pnas.1006652108 ↗
61. 10.3390/catal1203033110.3390/catal12030331 ↗
62. 10.1021/acscatal.1c0568710.1021/acscatal.1c05687 ↗
63. 10.1051/itmconf/2018230003710.1051/itmconf/20182300037 ↗
64. 10.1021/acscatal.2c0074510.1021/acscatal.2c00745 ↗