Polyethylene green composites modified with post agricultural waste filler: thermo-mechanical and damping properties
Source abstract
Abstract
The aim of the study was to determine thermo-mechanical properties and applicability of sunflower husk waste as a filler for ultra low density polyethylene composites. The post agricultural waste filler was milled and chemically treated with (3-aminopropyl)triethoxysilane (3-APS). The amount of filler used was 5, 10 and 20 wt%. The mechanical and thermal properties of the composites containing unmodified and modified natural fillers were determined in the course of static tensile test, rebound resilience by Schob method, and dynamic mechanic thermal analysis. The influence of filler loading and chemical modification of the filler on the morphology of natural composites was evaluated by SEM analysis.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Polymer Nanocomposites and Properties · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Mechanical Engineering and Management, Institute of Materials Technology, Poznan University of Technology, Poznan, Poland
Faculty of Mechanical Engineering and Management, Institute of Materials Science and Engineering, Poznan University of Technology, Poznan, Poland
Funding
Ministry of Science and Higher Education in Poland
References (38)
Show source-provided references
1. 10.1016/j.wasman.2009.08.00310.1016/j.wasman.2009.08.003 ↗
2. 10.1016/j.polymertesting.2016.02.00410.1016/j.polymertesting.2016.02.004 ↗
3. 10.1002/app.4328310.1002/app.43283 ↗
4. 10.14314/polimery10.14314/polimery ↗
5. 10.1016/j.compositesa.2003.09.01610.1016/j.compositesa.2003.09.016 ↗
6. 10.1002/(ISSN)1097-462810.1002/(ISSN)1097-4628 ↗
7. 10.1002/(SICI)1098-2329(199924)18:4<>1.0.CO;2-Q10.1002/(SICI)1098-2329(199924)18:4<>1.0.CO;2-Q ↗
8. 10.1016/j.compositesa.2015.08.03810.1016/j.compositesa.2015.08.038 ↗
9. 10.1007/s10965-012-9859-810.1007/s10965-012-9859-8 ↗
10. 10.1177/002199830707545610.1177/0021998307075456 ↗
11. Hashim MY · Int J Innov Res Sci Eng Technol · 2012 · 6 · 778
12. 10.15376/biores.8.4.6263-627910.15376/biores.8.4.6263-6279 ↗
13. 10.1016/j.compositesa.2010.03.00510.1016/j.compositesa.2010.03.005 ↗
14. Clark HA · Mod Plast · 1963 · 40 · 133
15. 10.1163/156856194X0011310.1163/156856194X00113 ↗
16. 10.1002/app.1983.07028032710.1002/app.1983.070280327 ↗
17. 10.1016/j.compositesb.2016.12.02110.1016/j.compositesb.2016.12.021 ↗
18. 10.1007/s00289-017-1931-410.1007/s00289-017-1931-4 ↗
19. 10.1002/(ISSN)1097-462810.1002/(ISSN)1097-4628 ↗
20. 10.1007/s10853-009-3349-310.1007/s10853-009-3349-3 ↗
21. 10.1163/156855498X0015310.1163/156855498X00153 ↗
22. 10.1016/j.matdes.2009.10.01410.1016/j.matdes.2009.10.014 ↗
23. 10.1016/j.msea.2010.06.02210.1016/j.msea.2010.06.022 ↗
24. 10.1016/j.compositesb.2014.10.02610.1016/j.compositesb.2014.10.026 ↗
25. 10.1016/j.compscitech.2004.12.05010.1016/j.compscitech.2004.12.050 ↗
26. 10.1016/j.compscitech.2006.07.00310.1016/j.compscitech.2006.07.003 ↗
27. Kakroodi AR, Kazemi Y, Cloutier A, et al. Mechanical performance of polyethylene (PE)-based biocomposites. In: Misra M, Pandey J, Mohanty A, editors. Biocomposites: design and mechanical performance. Elsevier; 2015. p. 237–256.10.1016/B978-1-78242-373-7.00003-2 ↗
28. 10.14314/polimery.2013.46110.14314/polimery.2013.461 ↗
29. Sałasińska K · Przem Chem · 2013 · 92 · 2027
30. 10.1080/15685543.2015.98452110.1080/15685543.2015.984521 ↗
31. Kaymakci A · BioResources · 2013 · 8 · 592
32. 10.1155/2012/47207810.1155/2012/472078 ↗
33. 10.1016/j.conbuildmat.2013.10.03810.1016/j.conbuildmat.2013.10.038 ↗
34. 10.1021/la061240 g10.1021/la061240 g ↗
35. 10.1007/s13233-015-3155-510.1007/s13233-015-3155-5 ↗
36. Kardos J · 1983 · 1
37. 10.1021/ma00148a04510.1021/ma00148a045 ↗
38. 10.1016/j.polymer.2005.01.02710.1016/j.polymer.2005.01.027 ↗