Does the Mode of Metal–Organic Framework/Electrode Adhesion Determine Rates for Redox-Hopping-Based Charge Transport within Thin-Film Metal–Organic Frameworks?
Source abstract
Abstract
Imparting electrical conductivity to metal–organic frameworks (MOFs) can render these otherwise insulating materials functional for applications such as electrical energy storage and release, electrochemical catalysis, and conductivity-based chemical sensing. Earlier computational and experimental studies of electrode-supported thin films of the structurally anisotropic MOF, NU-1000, indicated that its redox-hopping-based electrical conductivity is also anisotropic: electronic charges can move up to ∼3000 times faster in one direction than in others. To assess the anisotropy, the experiments took advantage of the following: (a) conductivity is most easily measured in the direction normal to the supporting-electrode surface, (b) directly solvothermally grown MOF crystallites are oriented with the crystallographic c -axis, nearly normal to the electrode, and (c) electrophoretically deposited crystallites are oriented mainly with the a, b crystallographic plane normal to the electrode. While the agreement between the experiment and theory for the degree of anisotropy of redox conductivity along the c direction vs through the a, b -plane is gratifying, we wondered if instead differences in the mode of attachment and adhesion of the MOF to the electrode might be responsible for the large apparent differences in conductivity. Here, we have evaluated the apparent conductivity of electrode-supported MOF-525, a porous compound that offers identical internal bonding connectivity and compositional periodicity in the crystallographic a versus b versus c direction and thus should display isotropic redox conductivity. We compared the behavior of crystalline films of MOF-525 directly solvothermally grown on electrodes to the ones deposited on electrodes electrophoretically. The experiments point to agreement within about a factor of two, with the remaining small difference likely arising mainly from differences in MOF/electrode contact area. Finally, the experiments revealed much smaller apparent conductivities for redox hopping through MOF-525 than through NU-1000 . This finding is broadly consistent with previous computational findings that emphasize the role of linker-to-linker electronic coupling. It is also consistent with a topology-driven need for hopping-based charge transport to follow a more circuitous molecular-level path through MOF-525 than through NU-1000 . The combined results have implications for the design and/or selection of MOFs for electrocatalysis and related applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal-Organic Frameworks: Synthesis and Applications · Enhanced Oil Recovery Techniques · Arsenic contamination and mitigation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Chemistry, Northwestern University, 2145 Sheridan Road, Evanston, Illinois 60208, United States
Funding
U.S. Department of Energy · Northwestern University
References (90)
Show source-provided references
1. 10.1126/science.123044410.1126/science.1230444 ↗
2. 10.1039/C4CS00135D10.1039/C4CS00135D ↗
3. 10.1021/cr300014x10.1021/cr300014x ↗
4. 10.1002/adma.20100285410.1002/adma.201002854 ↗
5. 10.1021/ja305563910.1021/ja3055639 ↗
6. 10.1002/anie.20060017510.1002/anie.200600175 ↗
7. 10.1021/ar100112y10.1021/ar100112y ↗
8. Burrows, A. D.; Cadman, L. K.; Gee, W. J.; Amer Hamzah, H.; Knichal, J. V.; Rochat, S. Tuning the Properties of Metal–Organic Frameworks by Post-Synthetic Modification; Wiley-VCH Verlag GmbH & Co. KGaA, 2018; pp 29–56.10.1002/9783527809097.ch2 ↗
9. 10.1039/C4CS00067F10.1039/C4CS00067F ↗
10. 10.1021/acs.inorgchem.7b0318110.1021/acs.inorgchem.7b03181 ↗
11. 10.1021/ja405082810.1021/ja4050828 ↗
12. 10.1039/C6CS00362A10.1039/C6CS00362A ↗
13. 10.1002/anie.20100614110.1002/anie.201006141 ↗
14. 10.1021/cr200327210.1021/cr2003272 ↗
15. 10.1021/la702466d10.1021/la702466d ↗
16. 10.1039/b802256a10.1039/b802256a ↗
17. 10.1021/acssensors.7b0030410.1021/acssensors.7b00304 ↗
18. 10.1039/C7QI00815E10.1039/C7QI00815E ↗
19. 10.1002/anie.20141185410.1002/anie.201411854 ↗
20. 10.1039/C6MH00484A10.1039/C6MH00484A ↗
21. 10.1021/acs.accounts.5b0053010.1021/acs.accounts.5b00530 ↗
22. 10.1039/b807083k10.1039/b807083k ↗
23. 10.1021/ja052431t10.1021/ja052431t ↗
24. 10.1039/c0cs00163e10.1039/c0cs00163e ↗
25. 10.1021/ar000101210.1021/ar0001012 ↗
26. 10.1021/ja207947710.1021/ja2079477 ↗
27. 10.1039/C7CS00122C10.1039/C7CS00122C ↗
28. 10.1126/sciadv.aap925210.1126/sciadv.aap9252 ↗
29. 10.1039/D0EE00153H10.1039/D0EE00153H ↗
30. 10.1002/anie.20150621910.1002/anie.201506219 ↗
31. 10.1039/C8CC02871K10.1039/C8CC02871K ↗
32. 10.1021/acs.jpclett.9b0328510.1021/acs.jpclett.9b03285 ↗
33. 10.1021/acsami.7b0154710.1021/acsami.7b01547 ↗
34. 10.1021/ja410684q10.1021/ja410684q ↗
35. 10.1039/C8CC01664J10.1039/C8CC01664J ↗
36. 10.1021/acs.jpcc.5b0606510.1021/acs.jpcc.5b06065 ↗
37. 10.1557/mrs.2016.24110.1557/mrs.2016.241 ↗
38. 10.1039/C8SC00961A10.1039/C8SC00961A ↗
39. 10.1021/jacs.8b0060510.1021/jacs.8b00605 ↗
40. 10.1021/ja512437u10.1021/ja512437u ↗
41. 10.1016/j.ccr.2017.11.02810.1016/j.ccr.2017.11.028 ↗
42. 10.1021/jacs.9b0586910.1021/jacs.9b05869 ↗
43. 10.1016/j.apsusc.2019.14383610.1016/j.apsusc.2019.143836 ↗
44. 10.1021/acsami.6b1683410.1021/acsami.6b16834 ↗
45. 10.1038/s41467-019-09682-010.1038/s41467-019-09682-0 ↗
46. 10.1021/acsami.8b0827010.1021/acsami.8b08270 ↗
47. 10.1021/acs.jpcc.6b1125110.1021/acs.jpcc.6b11251 ↗
48. 10.1021/acscatal.8b0292110.1021/acscatal.8b02921 ↗
49. 10.1002/celc.20190165010.1002/celc.201901650 ↗
50. 10.1021/ja403751610.1021/ja4037516 ↗
51. 10.1021/jacs.8b0369610.1021/jacs.8b03696 ↗
52. 10.1021/cm101238m10.1021/cm101238m ↗
53. 10.1021/acscatal.5b0176710.1021/acscatal.5b01767 ↗
54. 10.1021/jp209555k10.1021/jp209555k ↗
55. 10.1039/C6CC00805D10.1039/C6CC00805D ↗
56. 10.1039/C5CC09695B10.1039/C5CC09695B ↗
57. 10.1021/jacs.9b0765810.1021/jacs.9b07658 ↗
58. 10.1021/acsami.5b0690110.1021/acsami.5b06901 ↗
59. 10.1021/jacs.0c0289910.1021/jacs.0c02899 ↗
60. 10.1039/D1TA01970H10.1039/D1TA01970H ↗
61. 10.1111/ppl.1293510.1111/ppl.12935 ↗
62. Garcia H. · 2013 · 12 · 365
63. 10.1002/anie.20150558110.1002/anie.201505581 ↗
64. 10.1039/C8CS00256H10.1039/C8CS00256H ↗
65. 10.1039/C9QI01120J10.1039/C9QI01120J ↗
66. 10.1016/j.chempr.2016.06.01310.1016/j.chempr.2016.06.013 ↗
67. 10.1016/j.inoche.2020.10835410.1016/j.inoche.2020.108354 ↗
68. 10.1021/cm403726v10.1021/cm403726v ↗
69. More complex behavior could conceivably be encountered with four-electrode configurations, such as those used for scanning electrochemical microscopy, or with three-electrode configurations that operate under conditions where the thickness of the electrolyte solution beyond the coating is similar to, rather than much greater than, that of the coating itself, especially if care is not taken with siting of the reference electrode.
70. 10.1002/adma.20140194010.1002/adma.201401940 ↗
71. 10.1021/ic300825s10.1021/ic300825s ↗
72. Recently published work that focuses primarily on understanding the structure of PCN-221 and includes secondary discussions of related porphyrin-linker-based Zr-MOFs. The discussions suggest that many putative MOF-525 syntheses yield MOFs that are better described as partially disordered PCN-224 samples, where PCN-224 is characterized by fewer linkers and an she rather than ftw topology. Notably, the she topology is also x- y- and z-direction symmetric─consistent with our motivation for choosing MOF-525 here. The discussion also leads, for MOF-525, to the conclusion that phenyl groups likely are dihedrally rotated from the porphyrin by roughly 90°, rather than 0°. See: Koschnick, C.; Stäglich, R.; Scholz, T.; et al. Understanding disorder and linker deficiency in porphyrinic zirconium-based metal–organic frameworks by resolving the Zr8O6 cluster conundrum in PCN-221. Nat. Commun. 2021, 12, 3099.10.1038/s41467-021-23348-w ↗
73. A reviewer has suggested that slow intercrystalline transport through EPD films but not solvothermally grown films might account for the observed small differences in apparent charge-transport diffusion coefficients for the two types of films. Since the EPD film thickness is about three times greater than the average EPD crystallite size, we cannot rule out slow intercrystalline charge transport as an additional explanation for the roughly twofold smaller apparent charge-transport diffusivity for EPD-MOF-525 compared to ST-MOF-525. The absence in EIS data of an observable additional arc for EPD-MOF-525 samples suggests but doesn’t prove that a bottleneck due to intercrystalline charge transport is absent.
74. 10.1016/j.elecom.2015.06.00310.1016/j.elecom.2015.06.003 ↗
75. We used the excess powder formed during the solvothermal film synthesis to minimize batch variations and defect differences between the ST-MOF-525 and EPD-MOF-525 films.
76. Crystallites of PCN-222 and related csq-type MOFs typically are shaped as hexagonal rods or as extended ellipsoids, rather than as cubes. Electron microscopy measurements reveal, for both EPD-MOF-525 and ST-MOF-525, no hexagonal rods and no ellipsoids.
77. 10.1038/s41467-021-23348-w10.1038/s41467-021-23348-w ↗
78. Note that the impedance method, in isolation, is not useful for separating strongly coupled processes such as redox hopping and transfer or transport of charge-compensating electrolyte ions.
79. To translate conductivity measured by EIS to D(hopping) mathematically, we followed the equation D(EIS) = (σ(EIS)*4RT)/{(F^2)C0(redox)}.
80. The redox conductivity is anticipated to be the greatest when equal quantities of neutral and oxidized porphyrin linkers are present. Meaningful conductivity comparisons between differing types of films, however, can be made at potentials other than the formal potential, as long as the selected potential is the same for the samples being compared.
81. Application of the Cottrell equation has the potential for slight complications, if we are stepping to E(f) for Por(2+/+). The equation assumes that the concentration of the oxidizable species is zero immediately next to the electrode. If the Por(+/0) couple is rate-determining, this requirement is met. If Por(2+/+) is rate-limiting, then the concentration of the relevant species, Por(2+), right at the electrode is 0.5 cj0 rather than 0, and the concentration gradient at the electrode/MOF interface is only half what it would otherwise be; the slope of the i vs time–1/2 is only half what it should be; and D is underestimated by a factor of 2. Unfortunately, because of background contributions due to oxidation of solvent impurities (presumably either chloride or water), stepping well beyond the putative Por(2+/+) formal potential is not feasible. For simplicity, we assumed that that hopping rates based on the Por(+/0) couple and the Por(2+/+) couple are equal.
82. The following equation was used to obtain k(hopping) from D(hopping): k(hopping) = D(hopping)/(r^2).
83. 10.1021/ja108625z10.1021/ja108625z ↗
84. 10.1038/ncomms556210.1038/ncomms5562 ↗
85. 10.1039/C8SC03735C10.1039/C8SC03735C ↗
86. Crank J. · 1957
87. 10.1021/jacs.9b0360910.1021/jacs.9b03609 ↗
88. We thank a pair of reviewers for drawing our attention to differences in packing density and, therefore, MOF/electrode contact area, for EPD-MOF-525 vs ST-MOF-525.
89. Note that if any EPD crystallites are tilted, footprints for crystallite electrochemical contact with underlying conductive-glass electrodes will be diminished, even when line-of-sight assessment indicates high areal coverage. See further discussion later in the paper.
90. 10.1002/anie.19931111310.1002/anie.199311113 ↗