New insights into the partitioning behavior of Mo in nickel-based superalloys and its effect on microstructure using CALPHAD-assisted phase field modeling
Source abstract
Abstract
Elemental partitioning behaviors are critical in determining the high-temperature capabilities of superalloys. In multi-component superalloys, these behaviors are influenced by the competition among elements. This study examines the effects of Cr concentration on elemental distribution behaviors and γ′ evolution in Ni–10Al–4Mo– xCr superalloys using CALPHAD-informed phase field modeling. Our simulations show that Mo`s preference shifts from γ′ precipitates to γ matrix as Cr concentration increases. This shift results from the competitive interactions between Mo and Cr atoms at the corner sites of Ni 3Al, reducing Mo`s solubility in γ′ precipitates. Further analysis reveals that with increasing Cr concentration, more Mo is displaced by Cr at the B sites of γ′-A 3B. Additionally, the Mo content in γ′ precipitate decreases with rising Cr content, resulting in an abnormal rise in the γ′ volume fraction based on Mo mass balance. Moreover, γ′ coarsening rate initially rises and then falls with increasing Cr concentration in an inverted “V” shape, a change attributable to variations in the γ matrix supersaturation. These findings provide new insights into Mo distribution in nickel-based superalloys and offer guidance for designing superalloys with improved microstructural stability.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Reed · 2006
2. Alloys-By-Design: application to nickel-based single crystal superalloys10.1016/j.actamat.2009.08.018 ↗
3. A review of composition evolution in Ni-based single crystal superalloys10.1016/j.jmst.2020.01.026 ↗
4. Microstructural and compositional design of Ni-based single crystalline superalloys ― A review10.1016/j.jallcom.2018.01.224 ↗
5. The importance of diffusivity and partitioning behavior of solid solution strengthening elements for the high temperature creep strength of Ni-base superalloys10.1007/s11661-020-06028-0 ↗
6. Enhanced creep resistance induced by minor Ti additions to a second generation nickel-based single crystal superalloy10.1016/j.actamat.2022.117938 ↗
7. Process optimization and mechanical property investigation of non-weldable superalloy Alloy713ELC manufactured with selective electron beam melting10.1016/j.msea.2020.139485 ↗
8. Welding of precipitation-hardening nickel- base alloys(Welding precipitation hardenable Ni base alloys noting heat treatment, microfissuring, strain age cracking and other intricacies)
9. A model for the creep deformation behaviour of nickel-based single crystal superalloys10.1016/j.actamat.2012.05.023 ↗
10. Microstructure and solidification sequence of the interdendritic region in a third generation single-crystal nickel-base superalloy10.1007/s11661-009-9855-8 ↗
11. An analysis of solidification path in the Ni-base superalloy, CMSX10K
12. The effect of solution heat treatment on a single-crystal Ni-based superalloy10.1007/s11837-003-0158-z ↗
13. Effects of Ru on the high-temperature phase stability of Ni-base single-crystal superalloys10.1007/BF02586097 ↗
14. A castability model based on elemental solid-liquid partitioning in advanced nickel-base single-crystal superalloys10.1007/s11661-005-0272-3 ↗
15. Influence of Cr/Mo ratio on microstructure and mechanical properties of the Ni-based superalloys fabricated by laser additive manufacturing10.1016/j.jallcom.2021.162484 ↗
16. New Ni-based superalloys designed for laser additive manufacturing10.1016/j.jallcom.2020.157979 ↗
17. Influence of molybdenum on the creep properties of nickel-base superalloy single crystals10.1007/BF02782418 ↗
18. Effect of Mo addition on microstructural characteristics in a Re-containing single crystal superalloy10.1016/j.jmst.2013.12.019 ↗
19. Influence of composition on microstructural parameters of single crystal nickel-base superalloys10.1016/j.matchar.2012.05.001 ↗
20. Interfacial dislocation networks and creep in directional coarsened Ru-containing nickel-base single-crystal superalloys10.1007/s11661-008-9520-7 ↗
21. Ultra-high strength and ductility from rolling and annealing of a Ni-Cr-Co superalloy10.1016/j.scriptamat.2018.06.033 ↗
22. Evolution of Ni-based superalloys for single crystal gas turbine blade applications10.1016/S1270-9638(99)00108-X ↗
23. Evaluation of Ni–Cr-base alloys for SOFC interconnect applications10.1016/j.jpowsour.2006.02.099 ↗
24. Effects of tantalum on the partitioning of tungsten between the γ- and γ′-phases in nickel-based superalloys: linking experimental and computational approaches10.1016/j.actamat.2010.07.004 ↗
25. Improved creep strength of nickel-base superalloys by optimized γ/γ′ partitioning behavior of solid solution strengthening elements10.1016/j.msea.2016.08.121 ↗
26. Synergistic effects of Re and Ta on the distribution of W in Ni-based superalloys10.1016/j.intermet.2022.107609 ↗
27. Partitioning and diffusion of transition metal solutes in ternary model Ni-based single crystal superalloys10.1016/j.matdes.2017.05.032 ↗
28. Effects of Mo addition on microstructure of a 4th generation Ni-based single crystal superalloy10.1016/j.pnsc.2022.10.001 ↗
29. Effect of Ti and Al on microstructure and partitioning behavior of alloying elements in Ni-based powder metallurgy superalloys10.1007/s12613-019-1757-1 ↗
30. APFIM/TEM characterization of solute partitioning in a model Ni-Mo-Al-Ta superalloy10.1016/0039-6028(91)90434-T ↗
31. Partitioning of Re between γ and γ′ phase in nickel-base superalloys10.1016/j.scriptamat.2004.09.013 ↗
32. The Ni3Al-Ni3Cr-Ni3Mo section of the Ni-Cr-Al-Mo system10.1007/BF02396929 ↗
33. Thermodynamic modeling of the Al–Cr–Mo–Ni system10.1063/5.0176225 ↗
34. CALPHAD-informed phase-field model for two-sublattice phases based on chemical potentials: η -phase precipitation in Al-Zn-Mg-Cu alloys10.1016/j.actamat.2021.117602 ↗
35. Thermodynamic modeling of the Al–Co–W, Al–Ni–Ta and Co–Ni–W ternary systems10.1016/j.calphad.2023.102547 ↗
36. Experimental investigation and thermodynamic assessment of the Al-Co-Ni system10.1016/j.calphad.2018.03.008 ↗
37. A new phase-field method for simulating γ′ precipitation in multicomponent nickel-base superalloys10.1016/j.actamat.2009.01.006 ↗
38. SGTE data for pure elements10.1016/0364-5916(91)90030-N ↗
39. Algebraic representation of thermodynamic properties and the classification of solutions10.1021/ie50458a036 ↗
40. Experimental investigation and thermodynamic re-assessment of the Al–Mo–Ni system10.1016/j.jallcom.2016.03.044 ↗
41. J. Peng, Experimental investigation and thermodynamic modeling of the Al-Cr-Mo-Ni system and its sub-systems, (2016).
42. Experimental investigation and CALPHAD assessment of the eutectic trough in the system NiAl-Cr-Mo10.1007/s11669-016-0490-y ↗
43. Integrated unified phase-field modeling (UPFM)10.1002/mgea.44 ↗
44. Modeling of precipitation kinetics in multicomponent systems: application to model superalloys10.1016/j.actamat.2015.08.041 ↗
45. The effects of diffusional couplings on compositional trajectories and interfacial free energies during phase separation in a quaternary Ni-Al-Cr-Re model superalloy10.1016/j.actamat.2022.118020 ↗
46. Numerical simulation of precipitation in multicomponent Ni-base alloys10.1016/j.actamat.2013.07.018 ↗
47. A phase field study of microstructural changes due to the Kirkendall effect in two-phase diffusion couples10.1016/S1359-6454(01)00257-9 ↗
48. Diffusion in phases with several components and sublattices10.1016/0022-3697(82)90152-4 ↗
49. Algebraic representation of thermodynamic properties and the classification of solutions10.1021/ie50458a036 ↗
50. High-throughput determination of interdiffusivity matrices in Ni-Al-Ti-Cr-Co-Mo-Ta-W multicomponent superalloys and their application in optimization of creep resistance
51. High-throughput method–accelerated design of Ni-based superalloys
52. Phase-field modeling of bimodal microstructures in nickel-based superalloys10.1016/j.actamat.2008.10.039 ↗
53. Phase-field simulations with inhomogeneous elasticity: comparison with an atomic-scale method and application to superalloys10.1016/j.actamat.2010.04.008 ↗
54. Phase-field study on effects of antiphase domain and elastic energy on evolution of γ′ precipitates in nickel-based superalloys10.1016/j.commatsci.2016.11.036 ↗
55. A ternary phase-field model incorporating commercial CALPHAD software and its application to precipitation in superalloys10.1016/j.actamat.2009.10.002 ↗
56. Effects of Cr content on compositional evolution and precipitation kinetics of γ′ phase in Ni–Al–Cr alloy: 2D phase-field simulation10.1016/j.jmrt.2020.05.065 ↗
57. Phase-field simulation of coherent BCC/B2 microstructures in high entropy alloys10.1016/j.actamat.2020.07.030 ↗
58. Khachaturyan · 2013
59. An improvement on the three-dimensional phase-field microelasticity theory for elastically and structurally inhomogeneous solids10.1016/j.scriptamat.2009.02.007 ↗
60. Free energy of a nonuniform system. I. Interfacial free energy10.1063/1.1744102 ↗
61. A microscopic theory for antiphase boundary motion and its application to antiphase domain coarsening10.1016/0001-6160(79)90196-2 ↗
62. Effect of elastic interaction on nucleation: II. Implementation of strain energy of nucleus formation in the phase field method10.1016/j.actamat.2006.10.011 ↗
63. Applications of semi-implicit Fourier-spectral method to phase field equations10.1016/S0010-4655(97)00115-X ↗
64. Three-dimensional phase-field simulations of coarsening kinetics of γ′ particles in binary Ni–Al alloys10.1016/j.actamat.2004.02.032 ↗
65. Coarsening kinetics of γ′ phase in isothermal aged high Al content Ni–17 at.% Al alloy10.1016/j.matchemphys.2021.124902 ↗
66. Temperature dependence of kinetics pathway of γ′ precipitation in Co-Al-W superalloys: a phase-field study10.1016/j.jallcom.2022.166319 ↗
67. High-temperature static coarsening of gamma-prime precipitates in NiAlCr-X single crystals10.1007/s11661-018-05104-w ↗
68. Influence of coherency stress on microstructural evolution in model Ni-Al-Mo alloys10.1016/0956-7151(94)00337-H ↗
69. Quantitative phase field modelling of precipitate coarsening in Ni-Al-Mo alloys10.1016/j.commatsci.2018.01.021 ↗
70. Kinetics pathway of precipitation in model Co-Al-W superalloy10.1016/j.actamat.2017.12.032 ↗
71. Predicting the morphologies of γʹ precipitates in cobalt-based superalloys10.1016/j.actamat.2017.09.003 ↗
72. Phase-field simulation of γʹ coarsening behavior in cobalt-based superalloy10.1016/j.commatsci.2021.110358 ↗
73. Improvement of stress–rupture property by Cr addition in Ni-based single crystal superalloys10.1016/j.msea.2011.01.060 ↗
74. Solute partitioning in multi-component γ/γ′ Co–Ni-base superalloys with near-zero lattice misfit10.1016/j.scriptamat.2015.10.039 ↗
75. Partitioning and site occupancy of Ta and Mo in Co-base γ/γ′ alloys studied by atom probe tomography10.1016/j.intermet.2014.01.020 ↗
76. New insights into the microstructural stability based on the element segregation behavior at γ/γ′ interface in Ni-based single crystal superalloys with Ru addition10.1016/j.jmst.2023.02.007 ↗
77. The influence of tungsten on the chemical composition of a temporally evolving nanostructure of a model Ni-Al-Cr superalloy10.1017/S1431927604040589 ↗
78. Effect of multiple alloying additions on microstructural features and creep performance at 950 °C and 400 MPa in Ru-containing single crystal superalloys10.1016/j.msea.2017.03.081 ↗
79. Dislocation motion during high-temperature low-stress creep in Ru-free and Ru-containing single-crystal superalloys10.1016/j.matdes.2014.11.002 ↗
80. Ostwald ripening in multicomponent alloys10.1016/j.actamat.2013.03.049 ↗
81. A morphological control strategy of γ′ precipitates in nickel-based single-crystal superalloys: an aging design, fundamental principle, and evolutionary simulation
82. Morphological evolution of γ′ precipitates in superalloy M4706 during thermal aging10.1016/j.matlet.2017.09.096 ↗
83. Development of morphology and lattice misfit in modified Ni-base superalloy with Al, Co and Ni additions10.1515/mt-2023-0034 ↗
84. Optimal precipitate shapes in nickel-base γ–γ′ alloys10.1016/j.actamat.2011.12.008 ↗
85. Effect of cobalt on γ′ coarsening behavior of Ni-base powder metallurgy superalloy10.1016/j.jallcom.2022.166057 ↗
86. Isolation and testing of new single crystal superalloys using alloys-by-design method10.1016/j.msea.2016.04.089 ↗
87. High y'solvus new generation nickel-based superalloys for single crystal turbine blade applications
88. Lattice misfits in four binary Ni-Base γ/γ′ alloys at ambient and elevated temperatures10.1007/BF02663837 ↗
89. The effects of key elements Re and Ru on the phase morphologies and microstructure in Ni-based single crystal superalloys10.1016/j.jallcom.2022.166835 ↗
90. Effects of Cr on the properties of multicomponent cobalt-based superalloys with ultra high γ ’ volume fraction10.1016/j.jallcom.2020.154790 ↗
91. Development of low-density γ/γ′ Co–Al–Ta-based superalloys with high solvus temperature10.1016/j.actamat.2020.02.049 ↗
92. CALPHAD informed design of multicomponent CoNiCr-based superalloys exhibiting large lattice misfit and high yield stress10.1016/j.msea.2022.143798 ↗
93. Elemental site occupancy in the L12 A3B ordered intermetallic phase in Co-based superalloys and its influence on the microstructure10.1016/j.actamat.2018.09.049 ↗
94. Composition and temperature dependence of kinetic behavior of γ′ precipitation in Ni–Al–Cr–Mo quaternary model superalloys: a phase field study10.1016/j.jallcom.2023.172982 ↗
95. Effect of Mo on microstructural stability of a 4th generation Ni-based single crystal superalloy10.1016/j.jmrt.2022.10.072 ↗
96. Partitioning behavior and lattice misfit of γ/γ′ phases in Ni-based superalloys with different Mo additions10.1007/s12598-019-01309-z ↗
97. An atom probe tomography study of site preference and partitioning in a nickel-based superalloy10.1016/j.actamat.2016.11.053 ↗
98. Site occupancy of chromium in the γ′-Ni3Al phase of nickel-based superalloys: a combined 3D atom probe and first-principles study10.1080/09500839.2012.690904 ↗
99. Investigation of the elemental partitioning behaviour and site preference in ternary model nickel-based superalloys by atom probe tomography and first-principles calculations10.1080/14786435.2016.1192298 ↗
100. Site preference of transition metal elements in Ni3Al10.1016/j.scriptamat.2006.05.016 ↗