journal article·2020-07-23

Evaluation of Me-Li2CuO2 Solid Solutions (Where Me = Ni, Fe, and Mn) during CO2 and CO Chemisorption

Ana Yañez-Aulestia, Miguel A. Martı́nez-Cruz, Heriberto Pfeiffer

The Journal of Physical Chemistry C· Volume 124· Issue 29
Publisher page

Abstract

This work analyzes the chemical sorptions of carbon oxides (CO 2 and CO) on lithium cuprate (Li 2 CuO 2 ), with copper(II) ion substitution for 5 mol % of nickel(II), iron(III), or manganese(IV) ions into the crystalline structure. Li 2 CuO 2 has good characteristics for CO 2 capture and subsequent CO oxidation capture, but partial metal substitution modified its reactivity as a bifunctional material. Pristine and metal-substituted Li 2 CuO 2 samples were obtained via a solid-state reaction, and they were characterized structurally and microstructurally. Then, the carbon oxide capture capacities were evaluated. Under a saturated CO 2 atmosphere, 5Ni-Li 2 CuO 2 solid solution exhibits the best chemisorption at 700 °C. Nevertheless, using CO ( P CO = 0.04) in the absence of oxygen, 5Mn-Li 2 CuO 2 solid solution presented greater CO oxidation efficiency, owing to its structural contributions such as the facility to change the oxidation state to release oxygen (copper reduction) and the content of vacancies favoring catalytic CO oxidation. When oxygen ( P O 2 = 0.04) was added, all solid solutions presented higher weight increments than the pristine Li 2 CuO 2 sample, as the reduction in the crystal structures was avoided due to the Mars-van Krevelen mechanism, where ceramics acted as catalysts at moderate temperature and carbon oxide captors at higher temperatures, establishing them as bifunctional materials. The CO 2, CO 2 –O 2, CO 2 –CO, and CO 2 –CO–O 2 ( P P = 0.04 for each gas) isotherms at 700 °C allowed the visualization of gas mixture effects. In general, the isotherms showed the greatest weight increments in the presence of O 2 . Although the copper ions have shown catalytic activity, the presence of Ni(II), Fe(III), and Mn(IV) in Li 2 CuO 2 improved its catalytic properties. Nickel ions contributed to homolytic oxygen dissociation for carbonation, whilst the vacancies generated by Fe and Mn ions contributed to the Mars-van Krevelen mechanism. Also, Mn 4+ has a greater capacity to change its oxidation state in comparison to the other evaluated cations.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Chemical Looping and Thermochemical Processes · Carbon Dioxide Capture Technologies · Thermal Expansion and Ionic Conductivity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Laboratorio de Fisicoquı́mica y Reactividad de Superficies (LaFReS), Instituto de Investigaciones en Materiales, Universidad Nacional Autónoma de México, Circuito exterior s/n, Cd. Universitaria, Del. Coyoacán C.P., 04510 Ciudad de México, Mexico

Departamento de Quı́mica, Universidad Autónoma Metropolitana-Iztapalapa, 09340 Ciudad de México, Mexico

Funding

Direcci?n General de Asuntos del Personal Acad?mico, Universidad Nacional Aut?noma de M?xico · Consejo Nacional de Ciencia y Tecnolog?a

References (52)

Show source-provided references
1. 10.1002/anie.20190675610.1002/anie.201906756 ↗
2. 10.1002/cssc.20090003610.1002/cssc.200900036 ↗
3. 10.1039/C0EE00064G10.1039/C0EE00064G ↗
4. 10.1039/c3ra43965h10.1039/c3ra43965h ↗
5. 10.1088/1755-1315/268/1/01202610.1088/1755-1315/268/1/012026 ↗
6. 10.1007/s40243-014-0030-910.1007/s40243-014-0030-9 ↗
7. 10.1016/j.cej.2018.11.12810.1016/j.cej.2018.11.128 ↗
8. 10.1039/C8TA08932A10.1039/C8TA08932A ↗
9. Lux H. · Elektrochem · 1939 · 45 · 303
10. 10.3891/acta.chem.scand.01-059210.3891/acta.chem.scand.01-0592 ↗
11. 10.1021/cs300247g10.1021/cs300247g ↗
12. 10.1016/j.renene.2019.12.00610.1016/j.renene.2019.12.006 ↗
13. 10.1016/j.apcatb.2018.07.06510.1016/j.apcatb.2018.07.065 ↗
14. 10.1021/acs.iecr.6b0225710.1021/acs.iecr.6b02257 ↗
15. 10.1016/j.cej.2017.06.13510.1016/j.cej.2017.06.135 ↗
16. 10.1016/j.fuel.2015.11.00210.1016/j.fuel.2015.11.002 ↗
17. 10.1016/j.fuel.2019.02.04810.1016/j.fuel.2019.02.048 ↗
18. 10.1061/(ASCE)EE.1943-7870.000000610.1061/(ASCE)EE.1943-7870.0000006 ↗
19. 10.1021/ie070770k10.1021/ie070770k ↗
20. 10.1016/j.ijhydene.2015.12.11610.1016/j.ijhydene.2015.12.116 ↗
21. 10.1021/acs.energyfuels.5b0025610.1021/acs.energyfuels.5b00256 ↗
22. 10.1007/s10853-006-7070-110.1007/s10853-006-7070-1 ↗
23. 10.1021/jp511908t10.1021/jp511908t ↗
24. 10.1007/s10853-015-9020-210.1007/s10853-015-9020-2 ↗
25. 10.1021/acs.iecr.6b0374610.1021/acs.iecr.6b03746 ↗
26. 10.1016/j.ijhydene.2016.05.26710.1016/j.ijhydene.2016.05.267 ↗
27. 10.1016/j.ijggc.2013.04.00910.1016/j.ijggc.2013.04.009 ↗
28. 10.1021/acs.iecr.6b0479310.1021/acs.iecr.6b04793 ↗
29. 10.1021/acs.jpcc.7b0179910.1021/acs.jpcc.7b01799 ↗
30. 10.1021/acs.jpcc.7b0588810.1021/acs.jpcc.7b05888 ↗
31. 10.1016/j.jcou.2017.11.00910.1016/j.jcou.2017.11.009 ↗
32. 10.1039/C5RA03580E10.1039/C5RA03580E ↗
33. 10.1039/C6RA06895B10.1039/C6RA06895B ↗
34. 10.1016/j.jssc.2013.12.01810.1016/j.jssc.2013.12.018 ↗
35. 10.1021/acs.jpcc.5b1114710.1021/acs.jpcc.5b11147 ↗
36. 10.1016/j.tca.2017.12.02710.1016/j.tca.2017.12.027 ↗
37. 10.1007/s11356-018-2444-x10.1007/s11356-018-2444-x ↗
38. 10.1039/D0DT00273A10.1039/D0DT00273A ↗
39. 10.1016/j.fuel.2020.11818510.1016/j.fuel.2020.118185 ↗
40. 10.1180/minmag.1997.061.404.0710.1180/minmag.1997.061.404.07 ↗
41. 10.1107/S056773947600155110.1107/S0567739476001551 ↗
42. 10.1103/PhysRevB.60.623010.1103/PhysRevB.60.6230 ↗
43. 10.1016/S0167-2738(00)00293-910.1016/S0167-2738(00)00293-9 ↗
44. Vinod Chandran C. · 2016 · 89
45. 10.1016/j.jpowsour.2007.06.09710.1016/j.jpowsour.2007.06.097 ↗
46. Lowell S. · 2012
47. 10.1103/PhysRevB.57.13810.1103/PhysRevB.57.138 ↗
48. 10.1016/S0009-2509(54)80005-410.1016/S0009-2509(54)80005-4 ↗
49. Lide D. R. · 2007 · 129
50. 10.1016/j.jcat.2019.08.00210.1016/j.jcat.2019.08.002 ↗
51. 10.1002/cctc.20160171310.1002/cctc.201601713 ↗
52. 10.1021/jacs.6b0754410.1021/jacs.6b07544 ↗