Unexpected dynamic transformation from α phase to β phase in zirconium alloy revealed by in-situ neutron diffraction during high temperature deformation
Source abstract
Abstract
Dynamic transformation from alpha (HCP) to beta (BCC) phase in a zirconium alloy was revealed by the use of in-situ neutron diffraction during hot compression. The dynamic transformation was unexpectedly detected during isothermal compression at temperatures of 900°C and 950°C (alpha + beta two-phase region) and strain rates of 0.01 s−1 and 0.001 s−1, even though equilibrium two-phase states were achieved prior to the hot compression. Dynamic transformation was accompanied by diffusion of Sn from beta to alpha phase, which resulted in changes of lattice parameters and a characteristic microstructure of alpha grains. The lattice constant of alpha phase measured by the in-situ neutron diffraction increased during the hot compression, while the lattice constant of beta phase exhibited an initial increase and subsequent decrease during the hot compression. As a result, the magnitude of lattice (elastic) strain as well as stress (elastic stress, or phase stress) in alpha phase was found to become much greater than those in beta phase. According to an atomistic simulation, the Gibbs free energy of alpha phase increased with hydrostatic compressive pressure more evidently than that of beta phase. It could be concluded from such results that the occurrence of the dynamic transformation from alpha to beta is attributed to an increase in the Gibbs free energy of alpha phase relative to beta phase owing to the difference in the phase stress; i.e., the larger lattice distortion made alpha phase thermodynamically more unstable than beta phase. The present result suggests that deformation of two-phase materials can dynamically make Gibbs free energy of plastically harder phase higher than that of the softer phase through increasing elastic energy in the harder phase, which might lead to dynamic transformation from harder phase to softer phase.Download : Download high-res image (144KB)Download : Download full-size image
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Nuclear Materials and Properties · Titanium Alloys Microstructure and Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Dynamic transformation of deformed austenite at temperatures above the Ae310.1016/j.pmatsci.2016.04.004 ↗
2. Dynamic transformation during the high temperature deformation of titanium alloys
3. A new thermomechanical heat treatment for grain refining in low carbon steels
4. Novel thermomechanical processing methods for achieving ultragrain refinement of low-carbon steel without heavy plastic deformation10.1080/21663831.2016.1208301 ↗
5. Ultrafine grained structure formation in steels using dynamic strain induced transformation processing10.1179/174328006X102538 ↗
6. Deformation induced ferrite transformation in low carbon steels, Current Opinion in Solid State and
7. Nature of dynamic ferrite transformation revealed by in-situ neutron diffraction analysis during thermomechanical processing10.1016/j.scriptamat.2019.02.017 ↗
8. Role of mechanical activation in the dynamic transformation of austenite10.1016/j.actamat.2013.06.054 ↗
9. Dynamic transformation during the high temperature deformation of two-phase titanium alloys10.1016/j.msea.2019.138047 ↗
10. Accelerated flow softening and dynamic transformation of Ti-6Al-4V alloy in two-phase region during hot deformation via coarsening α grain
11. Dynamic effects on flow and fracture during isothermal forging of a titanium alloy10.1016/0036-9748(80)90102-7 ↗
12. Effect of strain and temperature in a superplastic Ni-modified Ti–6Al–4V Alloy10.2320/matertrans1989.31.200 ↗
13. Stress-induced phase transformation during superplastic deformation in two-phase Ti–Al–Fe alloy10.1016/S1359-6454(00)00049-5 ↗
14. Transformation softening in three titanium alloys10.1016/j.matdes.2016.10.039 ↗
15. LAMMPS-a flexible simulation tool for particle-based materials modeling at the atomic, meso, and continuum scales10.1016/j.cpc.2021.108171 ↗
16. Development of an interatomic potential for the simulation of phase transformations in zirconium10.1080/09500830701191393 ↗
17. Fast and robust algorithm for energy minimization of spin systems applied in an analysis of high temperature spin configurations in terms of skyrmion density10.1016/j.cpc.2020.107749 ↗
18. The use of time-of-flight neutron diffraction to study grain interaction stresses10.1016/0001-6160(83)90082-2 ↗
19. The beta to alpha phase transformation in Zircaloy-410.1016/0022-3115(70)90216-3 ↗
20. Flow behavior and globularization kinetics during hot working of Ti–6Al–4V with a colony alpha microstructure10.1016/S0921-5093(98)01156-3 ↗
21. High-Temperature Deformation Constitutive Model of Zircaloy-4 Based on the Support Vector Regression Algorithm during Hot Rolling
22. An empirical relation defining the stress dependence of minimum creep rate in metals
23. Flow softening-based formation of Widmanstätten ferrite in a 0.06% C steel deformed above the Ae310.2355/isijinternational.55.300 ↗
24. Effect of Zr and Sn on Young's modulus and superelasticity of Ti–Nb-based alloys10.1016/j.msea.2006.09.051 ↗
25. The Zr–Sn binary system: New experimental results and thermodynamic assessment10.1016/j.calphad.2008.04.001 ↗
26. Energetics of binary Zr–Nb, Zr–Sn and Nb–Sn alloys and solute-vacancy binding: DFT calculations
27. Atomic-scale observation of non-classical nucleation-mediated phase transformation in a titanium alloy
28. Banerjee · 2010
29. Atomic structure of interphase boundary of an a precipitate plate in a β Ti [sbnd] Cr alloy10.1080/09500839508242449 ↗
30. Loss of coherency of the alpha/beta interface boundary in titanium alloys during deformation10.1080/09500839.2010.521526 ↗
31. Phase transformation via atomic-scale periodic interfacial energy
32. A study of epitaxial growth behaviors of equiaxed alpha phase at different cooling rates in near alpha titanium alloy10.1016/j.actamat.2016.10.012 ↗
33. Elastic anisotropy of HCP metal crystals and polycrystals
34. First-principles calculations of phase transition, elastic modulus, and superconductivity under pressure for zirconium10.1063/1.3556753 ↗
35. The dynamic transformation of deformed austenite at temperatures above the Ae310.1016/j.actamat.2013.01.006 ↗
36. Numerical simulation of dynamic strain-induced austenite–ferrite transformation in a low carbon steel10.1016/j.actamat.2009.03.005 ↗
37. Effect of Mn and Si on the dynamic transformation of austenite above the Ae3 temperature10.1016/j.actamat.2014.08.060 ↗
38. Strategy for managing both high strength and large ductility in structural materials–sequential nucleation of different deformation modes based on a concept of plaston10.1016/j.scriptamat.2020.02.001 ↗
39. Corrigendum to ‘Strategy for Managing Both High Strength and Large Ductility in Structural Materials-sequential nucleation of different deformation modes based on a concept of plaston’[Scripta Materialia 181 (2020) 35-42/SMM 13102]10.1016/j.scriptamat.2021.113755 ↗
40. Tanaka · 2022
41. J.W. Christian, The theory of transformations in metals and alloys, Newnes 2002.10.1016/B978-008044019-4/50022-2 ↗