Effect of Film Morphology on the Li Ion Intercalation Kinetics in Anodic Porous Manganese Dioxide Thin Films
Source abstract
Abstract
Electrolytic manganese dioxide (EMD) films are electrodeposited from acid MnSO 4 solution, targeting equivalent film thicknesses between 25 and 100 nm onto silicon substrates coated with Pt and TiN seed layers. The structure and morphology of the deposited EMD films are characterized and tied to the observed electrochemical performance. Deposition efficiencies as large as 80% are achieved, as determined from Rutherford back scattering (RBS). TEM and SEM show that our EMD films are highly porous. The degree of porosity is dependent on the deposition current density and also the deposition time. The electrochemical activity of the EMD films for lithium ion intercalation is investigated in propylene carbonate solvent with 1 M LiClO 4 . Reversible insertion and extraction of Li + follows after removing water from the films by annealing and subsequent electrochemical cycling. The porous EMD thin films show a Li ion capacity up to 90% of the theoretical capacity at 0.8 C rate, based on the Mn content from RBS data and assuming one Li ion per MnO 2 unit. The effect of film thickness and film porosity on the rate of Li + intercalation (and thus accessible capacity) is discussed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Transition Metal Oxide Nanomaterials · Advancements in Battery Materials · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
KACST-Intel Consortium Center of Excellence in Nano-Manufacturing Applications (CENA), Riyadh, Saudi Arabia
imec, Kapeldreef 75, B-3001 Heverlee, Belgium
Chemistry Department, Alexandria University, Alexandria Governorate, Egypt
Centre for Surface Chemistry and Catalysis, Faculty of Bioscience Engineering, KU Leuven, 3001 Leuven, Belgium
References (26)
Show source-provided references
1. Clarke C. J. · Electrochim. Acta · 2006 · 51 · 577310.1016/j.electacta.2006.03.013 ↗
2. Johns P. · J. Mater. Chem. · 2011 · 21 · 1015310.1039/c0jm04357e ↗
3. Thackeray M. M. · Prog. Solid State Chem. · 1997 · 25 · 110.1016/S0079-6786(97)81003-5 ↗
4. Chabre Y. · Prog. Solid State Chem. · 1995 · 23 · 110.1016/0079-6786(94)00005-2 ↗
5. Ruetschi P. · J. Electrochem. Soc. · 1984 · 131 · 273710.1149/1.2115399 ↗
6. Jung W. I. · J. Mater. Chem. · 2009 · 19 · 800
7. Ghaemi M. · J. Power Sources · 2002 · 111 · 24810.1016/S0378-7753(02)00309-9 ↗
8. Sarciaux S. · J. Power Sources · 1999 · 81 · 66110.1016/S0378-7753(98)00230-4 ↗
9. Sarciaux S. · J. Power Sources · 1999 · 81 · 65610.1016/S0378-7753(99)00095-6 ↗
10. Lee J. A. · J. Colloid Interface Sci. · 1973 · 42 · 37210.1016/0021-9797(73)90302-0 ↗
11. Ikeda, H.; Saito, T.; Tamura, H.Manganese Dioxide Symposium;Union Carbide Corp.:Cleveland, OH, 1975; Vol.1, p384.
12. Dose W. M. · J. Electrochem. Soc. · 2011 · 158 · A103610.1149/1.3611013 ↗
13. Dose W. M. · J. Electrochem. Soc. · 2011 · 158 · A90510.1149/1.3597640 ↗
14. Arnott J. B. · J. Power Sources · 2007 · 165 · 58110.1016/j.jpowsour.2006.10.028 ↗
15. Cross A. · J. Power Sources · 2011 · 196 · 784710.1016/j.jpowsour.2011.04.049 ↗
16. Cross A. D. · J. Electrochem. Soc. · 2011 · 158 · A116010.1149/1.3625581 ↗
17. Notten P. H. L. · Adv. Mater. · 2007 · 19 · 456410.1002/adma.200702398 ↗
18. Etman A. S. · 2012
19. Babakhani B. · J. Power Sources · 2010 · 195 · 211010.1016/j.jpowsour.2009.10.045 ↗
20. Baddour-Hadjean R. · Chem. Rev. · 2009 · 110 · 127810.1021/cr800344k ↗
21. Julien C. M. · Spectrochim. Acta, Part A · 2004 · 60 · 68910.1016/S1386-1425(03)00279-8 ↗
22. Julien C. M. · Solid State Ionics · 2006 · 177 · 1110.1016/j.ssi.2005.10.012 ↗
23. Linden, D.; Reddy, T. B.Handbook of Batteries,3rd ed.McGraw-Hill:New York, 2002; p35.
24. Guan D. · Nanoscale · 2011 · 3 · 146510.1039/c0nr00939c ↗
25. Vereecken P. M. · 2013
26. Aurbach D. · J. Power Sources · 2003 · 119 · 49710.1016/S0378-7753(03)00273-8 ↗