Effect of Clay Surface Charge on the Emerging Properties of Polystyrene–Organoclay Nanocomposites
Source abstract
Abstract
A series of polystyrene–clay nanocomposites, based on two natural clay types (Na–Montmorillonite and Hectorite) and two synthetic clays (Laponite and Li–Fluorohectorite), were prepared via in situ intercalative polymerization after surface modification with an organic ammonium cation (CTAB). The structural characteristics of the organically modified clays as well as the nanocomposites were investigated by means of wide-angle X-ray scattering (WAXS), and the thermal properties were studied with TGA. In the organically modified clays, the silicate interlayer spacing increases, and the magnitude seems to be directly correlated with the amount of clay surface charge. In the nanocomposites, polymer intercalation is also observed, but partial exfoliation is present, modifying significantly the morphology of the material. The degree of dispersion of the clay platelets, as well as the resulting properties of the nanocomposites, were found again to be systematically, and almost linearly, correlated with the intrinsic surface charge of the clays, which varied between 44 and 120 meq/100 g. Increased dispersion was seen in the nanocomposites made from clays with low surface charge, here Hectorite and Laponite, suggesting that these can be suitable alternatives to the more employed Montmorillonite for enhancement of thermal properties. The thermal stability was found to be better for the nanocomposites than for the pure polystyrene.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · Conducting polymers and applications · Polymer Nanocomposite Synthesis and Irradiation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Gilman J. W. · Chem. Mater. · 2000 · 12 · 186610.1021/cm0001760 ↗
2. Zhu J. · Polym. Int. · 2000 · 49 · 115810.1002/1097-0126(200010)49:10<1158::AID-PI505>3.0.CO;2-G ↗
3. Kojima Y. · J. Mater. Res. · 1993 · 8 · 118510.1557/JMR.1993.1185 ↗
4. He J. · Microporous Mesoporous Mater. · 2008 · 109 · 7310.1016/j.micromeso.2007.04.051 ↗
5. Haraguchi K. · Adv. Mater. · 2002 · 14 · 112010.1002/1521-4095(20020816)14:16<1120::AID-ADMA1120>3.0.CO;2-9 ↗
6. Utracki L. A. · 2004 · 1
7. Usuki A. · J. Mater. Res. · 1993 · 8 · 117910.1557/JMR.1993.1179 ↗
8. Okada A. · Macromol. Mater. Eng. · 2006 · 291 · 144910.1002/mame.200600260 ↗
9. Hasegawa N. · J. Appl. Polym. Sci. · 1998 · 67 · 8710.1002/(SICI)1097-4628(19980103)67:1<87::AID-APP10>3.0.CO;2-2 ↗
10. Hasegawa N. · J. Appl. Polym. Sci. · 1999 · 74 · 335910.1002/(SICI)1097-4628(19991227)74:14<3359::AID-APP9>3.0.CO;2-2 ↗
11. Panwar A. · J. Reinf. Plast. Compos. · 2011 · 30 · 44610.1177/0731684411399132 ↗
12. Vaia R. A. · Chem. Mater. · 1993 · 5 · 169410.1021/cm00036a004 ↗
13. Alexandre M. · Mater. Sci. Eng., R · 2000 · 28 · 110.1016/S0927-796X(00)00012-7 ↗
14. Fu X. · Mater. Lett. · 2000 · 42 · 1210.1016/S0167-577X(99)00151-2 ↗
15. Zhu J. · Chem. Mater. · 2001 · 13 · 377410.1021/cm000984r ↗
16. Kaviratna P. D. · J. Phys. Chem. Solids · 1996 · 57 · 189710.1016/S0022-3697(96)00076-5 ↗
17. Mitchell C. A. · J. Polym. Sci., Part B: Polym. Phys. · 2002 · 40 · 143410.1002/polb.10209 ↗
18. Burmistr M. V. · Polymer · 2005 · 46 · 1222610.1016/j.polymer.2005.10.094 ↗
19. Sun Q. H. · Macromol. Mater. Eng. · 2004 · 289 · 28810.1002/mame.200300219 ↗
20. Zhu J. · Chem. Mater. · 2001 · 13 · 464910.1021/cm010451y ↗
21. Bakk A. · Phys. Rev. E · 2002 · 65 · 910.1103/PhysRevE.65.021407 ↗
22. Chen B. Q. · Carbohydr. Polym. · 2005 · 61 · 45510.1016/j.carbpol.2005.06.020 ↗
23. Moncada E. · Macromol. Chem. Phys. · 2006 · 207 · 137610.1002/macp.200600150 ↗
24. Van Olphen H. · 1979
25. Boylu F. · Sep. Sci. Technol. · 2012 · 47 · 84210.1080/01496395.2011.634475 ↗
26. Labrador A. L. · J. Phys.: Conf. Ser. · 2013 · 425 · 07201910.1088/1742-6596/425/7/072019 ↗
27. Hammersley A. P. · High Pressure Res. · 1996 · 14 · 23510.1080/08957959608201408 ↗
28. Laird D. A. · Appl. Clay Sci. · 2006 · 34 · 7410.1016/j.clay.2006.01.009 ↗
29. Wang B. X. · J. Mater. Chem. · 2009 · 19 · 181610.1039/b818502f ↗
30. da Silva G. J. · Phys. Rev. E · 2002 · 66
31. Arora A. · J. Polym. Res. · 2011 · 18 · 84310.1007/s10965-010-9481-6 ↗
32. Qi R. · J. Appl. Polym. Sci. · 2010 · 115 · 272310.1002/app.29949 ↗
33. Patterson A. L. · Phys. Rev. · 1939 · 56 · 97810.1103/PhysRev.56.978 ↗
34. Williamson G. K. · Acta Metall. · 1953 · 1 · 2210.1016/0001-6160(53)90006-6 ↗
35. Uthirakumar P. · Eur. Polym. J. · 2004 · 40 · 243710.1016/j.eurpolymj.2004.06.013 ↗
36. Gilman J. W. · 200010.6028/NIST.IR.6531 ↗
37. Bharadwaj R. K. · Macromolecules · 2001 · 34 · 918910.1021/ma010780b ↗