journal article·2022-01

Hierarchical twinning and light impurity doping enable high-performance GeTe thermoelectrics

Yi-Fen Tsai, Meng-Yuan Ho, Pai-Chun Wei, Hsin-Jay Wu

Acta Materialia· Volume 222
Publisher page

Abstract

Abstract Microstructure engineering fulfilled by phase transformation elicits the reduced thermal conductivity κ in thermoelectric materials. We demonstrate that the multiscale hierarchical twinning structure could exist in the GeTe alloys as the phase transformation from cubic β-GeTe to rhombohedral α-GeTe is manipulated by two-step cooling. The coexistence of nanoscale and microscale herringbone structures yields the low-lying κ, attributing to the reorientation of martensitic variants and pile-up of martensitic twinning. Dilute dopants of Cu and Bi/Sb further suppresses hole carrier concentration nH to the order of 1020 cm−3, leading to the enhanced power factor PF = S2ρ−1 of α-GeTe. Meanwhile, the phase diagram engineering probes the solubility limit of Cu in the single-phase GeTe, diminishing the formation of undesired impurity phases. These strategies boost the peak zT value to 1.5 at 698 K in the light-doped Bi0.01Cu0.01Ge0.98Te alloy. The multiscale twin hierarchy and carrier optimization synergistically enhance the thermoelectric performance of GeTe-based alloys that provide a new chapter in search of green energy resources out from phase change materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · Phase-change materials and chalcogenides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Complex thermoelectric materials10.1038/nmat2090 ↗
2. Stabilizing the optimal carrier concentration for high thermoelectric efficiency10.1002/adma.201103153 ↗
3. Thermodynamics of thermoelectric phenomena and applications10.3390/e13081481 ↗
4. Medium-temperature thermoelectric GeTe: vacancy suppression and band structure engineering leading to high performance10.1039/C9EE00317G ↗
5. Lead-free MnTe mid-temperature thermoelectric materials: facile synthesis, p-type doping and transport properties10.1039/C8TC00904J ↗
6. Attaining high mid-temperature performance in (Bi,Sb)2Te3 thermoelectric materials via synergistic optimization10.1038/am.2016.134 ↗
7. Thermodynamic routes to ultralow thermal conductivity and high thermoelectric performance10.1002/adma.201906457 ↗
8. Compositional fluctuations locked by athermal transformation yielding high thermoelectric performance in GeTe10.1002/adma.202005612 ↗
9. From dislocation to nano-precipitation: evolution to low thermal conductivity and high thermoelectric performance in n-type PbTe10.1002/adfm.202005479 ↗
10. Designing environmentally friendly high-zT Zn4Sb3 via thermodynamic routes10.1021/acsaem.9b01531 ↗
11. Realizing high thermoelectric performance in GeTe through decreasing the phase transition temperature via entropy engineering10.1039/C9TA10963C ↗
12. GeTe thermoelectrics10.1016/j.joule.2020.03.004 ↗
13. Structure of covalently bonded materials: from the Peierls distortion to phase-change materials10.1016/j.crhy.2015.12.009 ↗
14. Electronic origin of the high thermoelectric performance of GeTe among the p-type group IV monotellurides10.1038/am.2017.8 ↗
15. High thermoelectric performance achieved in GeTe–Bi2Te3 pseudo-binary via van der waals gap-induced hierarchical ferroelectric domain structure
16. Boosting the thermoelectric performance of pseudo-layered Sb2Te3(GeTe)n via vacancy engineering10.1002/advs.201801514 ↗
17. Synergistic optimization of thermoelectric performance of Sb doped GeTe with a strained domain and domain boundaries10.1039/D0TA00628A ↗
18. Dilute Cu2Te-alloying enables extraordinary performance of r-GeTe thermoelectric
19. Cu/Sb codoping for tuning carrier concentration and thermoelectric performance of GeTe-based alloys with ultralow lattice thermal conductivity10.1021/acsaem.8b02213 ↗
20. Ultralow lattice thermal conductivity and superhigh thermoelectric figure-of-merit in (Mg, Bi) co-doped GeTe10.1002/adma.202008773 ↗
21. Rhombohedral to cubic conversion of GeTe via MnTe alloying leads to ultralow thermal conductivity, electronic band convergence, and high thermoelectric performance10.1021/jacs.7b13611 ↗
22. Unravelling p–n conduction transition in high thermoelectric figure of merit gallium-doped Bi2Te3 via phase diagram engineering10.1021/acsaem.9b02500 ↗
23. High thermoelectric performance in Cu-doped Bi2Te3 with carrier-type transition10.1016/j.actamat.2018.07.022 ↗
24. The pn conduction type transition in Ge-incorporated Bi2Te3 thermoelectric materials10.1016/j.actamat.2016.09.043 ↗
25. Phase diagram of ternary Cu-Ga-Te system and thermoelectric properties of chalcopyrite CuGaTe2 materials10.1016/j.actamat.2016.07.060 ↗
26. State of the art Ag50-xSbxSe50-yTey alloys: their high zT values, microstructures and related phase equilibria10.1016/j.actamat.2015.04.011 ↗
27. Search for new thermoelectric materials with low Lorenz number10.1039/C7TA04332E ↗
28. On the calculation of Lorenz numbers for complex thermoelectric materials
29. Characterization of Lorenz number with Seebeck coefficient measurement10.1063/1.4908244 ↗
30. High Performance Thermoelectrics from earth-abundant materials: enhanced Figure of merit in PbS by second phase nanostructures10.1021/ja208658w ↗
31. Charge carrier effective mass and concentration derived from combination of Seebeck coefficient and 125Te NMR measurements in complex tellurides
32. Investigation on the structure and thermoelectric properties of CuxTe binary compounds10.1039/C8DT04351E ↗
33. High thermoelectric performance in copper telluride10.1038/am.2015.91 ↗
34. Phase diagram, ferromagnetic martensitic transformation and magnetoresponsive properties of Fe-doped MnCoGe alloys10.1016/j.jmmm.2012.12.001 ↗
35. Ferromagnetic martensitic transformation and large magnetocaloric effect in Ni35Co15-xFexMn35Ti15 (x = 2, 4, 6, 8) alloys10.1063/5.0001403 ↗
36. Martensitic transformations and shape memory materials10.1016/S1359-6454(99)00295-5 ↗
37. Martensitic transformation, shape memory effect and superelasticity of Ti-Nb binary alloys10.1016/j.actamat.2006.01.019 ↗
38. Strong phonon–phonon interactions securing extraordinary thermoelectric Ge1-xSbxTe with Zn-alloying-induced band alignment10.1021/jacs.8b12624 ↗
39. Herringbone structure in GeTe-based thermoelectric materials10.1016/j.actamat.2015.03.015 ↗
40. The self-accommodated morphology of martensite in nanocrystalline NiTi shape memory alloys10.1016/j.actamat.2005.01.033 ↗
41. Unification of the non-linear geometric transformation theory of martensite and crystal plasticity - Application to dislocated lath martensite in steels10.1016/j.ijplas.2019.02.016 ↗
42. On the energy-minimizing strains in martensitic microstructures – Part 2: geometrically linear theory10.1016/j.jmps.2012.12.011 ↗
43. Mathematical models of martensitic microstructure10.1016/j.msea.2003.11.055 ↗
44. Phase-field modeling of martensitic microstructure with inhomogeneous elasticity
45. Stacking fault-induced minimized lattice thermal conductivity in the high-performance GeTe-based thermoelectric materials upon Bi2Te3 alloying10.1021/acsami.9b04984 ↗
46. Realizing zT of 2.3 in Ge1-x-ySbxInyTe via reducing the phase-transition temperature and introducing resonant energy doping10.1002/adma.201705942 ↗
47. Discovery of low-temperature GeTe-based thermoelectric alloys with high performance competing with Bi2Te310.1039/C9TA11901A ↗
48. Arrays of planar vacancies in superior thermoelectric Ge1-x-yCdxBiyTe with band convergence10.1002/aenm.201801837 ↗
49. Stacking faults modulation for scattering optimization in GeTe-based thermoelectric materials10.1016/j.nanoen.2019.104347 ↗