Molecular dynamics study on the ductile-to-brittle transition in W-Re alloy systems
Source abstract
Abstract
Ductile-to-brittle transition (DBT) is frequently found in bcc W-based alloy systems, leading to varied fracture toughness at different temperatures. Re is recognized as an effective alloying element for enhancing the mechanical properties of W-based alloys and helium bubble is the major irradiation defect in W-based alloy systems, both of which affect the DBT phenomenon. Herein, molecular dynamics (MD) simulations are utilized to explore the role of Re and helium bubble in controlling the DBT curve in bcc W-based alloy. DBT curves are constructed with mode-I loading of diverse pre-cracked systems at 1–1800 K. In addition, fracture stress is determined based on the concept of critical strain energy release rate, which is echoed with DBT curves. Re`s role in reducing fracture stress sensitivity contributes to the decrease in both the DBT temperature (DBTT) and DBT slope. The effect of helium bubbles is the opposite of the effect of Re. The underlying mechanisms are analyzed in relation to the behavior of the crack tips. In addition, the considerably high strain rate applied in MD simulations primarily accounts for the greater DBTT values observed compared to the experimental data. A logarithmic relationship with the strain rate is applied to connect the experimental data and MD results. Overall, this paper can deepen the understanding of the DBT phenomenon of W-based alloy system, improving the material`s long-term performance and reliability.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Fusion materials and technologies · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Comparative study of radiation defects in ion irradiated bulk and thin-foil tungsten10.1016/j.actamat.2019.12.053 ↗
2. Atomic irradiation defects induced hardening model in irradiated tungsten based on molecular dynamics and CPFEM10.1016/j.ijplas.2024.103895 ↗
3. Atomistically-informed hardening and kinetics models of helium bubble in irradiated tungsten10.1016/j.ijplas.2023.103620 ↗
4. Atomically-informed dislocation dynamics model for prediction of void hardening in irradiated tungsten10.1016/j.ijplas.2023.103727 ↗
5. Degradation of electrical resistivity of tungsten following shielded neutron irradiation10.1016/j.actamat.2023.119025 ↗
6. Dynamic equilibrium of displacement damage defects in heavy-ion irradiated tungsten10.1016/j.actamat.2022.118578 ↗
7. Mechanisms of helium irradiation blistering and surface deformation in tungsten10.1016/j.actamat.2023.118993 ↗
8. Trends in vacancy distribution and hardness of high temperature neutron irradiated single crystal tungsten10.1016/j.actamat.2020.07.047 ↗
9. Temperature threshold for preferential bubble formation on grain boundaries in tungsten under in-situ helium irradiation10.1016/j.scriptamat.2020.01.013 ↗
10. Grain boundary softening from stress assisted helium cavity coalescence in ultrafine-grained tungsten10.1016/j.actamat.2023.118948 ↗
11. Non-uniform He bubble formation in W/W2C composite: experimental and ab-initio study10.1016/j.actamat.2021.117608 ↗
12. Anisotropic factors affecting the ductile-brittle transition of rolled-tungsten after different recrystallization treatments10.1016/j.ijrmhm.2022.105981 ↗
13. Effect of hot-working process on interface structure and ductile-to-brittle transition temperature of tungsten alloy reinforced by Al2O3 particles10.1016/j.ijrmhm.2022.105945 ↗
14. Brittle-ductile transition temperature of recrystallized tungsten following exposure to fusion relevant cyclic high heat load
15. A coupled crystal-plasticity and phase-field model for understanding fracture behaviors of single crystal tungsten10.1016/j.ijplas.2022.103375 ↗
16. Mechanism of brittle-to-ductile transition in tungsten under small-punch testing10.1016/j.actamat.2021.117332 ↗
17. Effect of high-temperature neutron irradiation on fracture toughness of ITER-specification tungsten
18. Recent progress in the assessment of irradiation effects for in-vessel fusion materials: tungsten and copper alloys10.1088/1741-4326/ac4062 ↗
19. Effect of neutron irradiation on ductility of tungsten foils developed for tungsten-copper laminates
20. A threshold density of helium bubbles induces a ductile -to -brittle transition at a grain boundary in nickel10.1016/j.jnucmat.2020.152118 ↗
21. DBTT and tensile properties of as-sintered tungsten alloys reinforced by yttrium-zirconium oxide10.1016/j.jnucmat.2023.154318 ↗
22. Effect of yttrium doping in tungsten on sinterability and properties as a plasma-facing material10.1016/j.jallcom.2023.169961 ↗
23. DBTT and recrystallization behavior analyses for rolled and forged potassium-doped tungsten alloys10.1016/j.fusengdes.2024.114569 ↗
24. Tungsten modified by potassium doping and rhenium addition for fusion reactor applications10.1016/j.fusengdes.2019.111445 ↗
25. Thermal shock behavior of potassium doped and rhenium added tungsten alloys
26. Unveiling the intrinsic rhenium effect in Tungsten10.1016/j.actamat.2023.119586 ↗
27. Ductile-to-brittle transition and brittle fracture stress of ultrafine-grained low-carbon steel10.3390/ma14071634 ↗
28. Effect of delamination and grain refinement on fracture energy of ultrafine-grained steel determined using an instrumented charpy impact test10.3390/ma15030867 ↗
29. Investigating the ductile to brittle transition phenomenon in binary Fe-Ni systems using molecular dynamics simulation10.1016/j.jmps.2024.105624 ↗
30. Ductile-brittle transition temperature of ultrafine ferrite/cementite microstructure in a low carbon steel controlled by effective grain size10.2355/isijinternational.44.610 ↗
31. First-principles study on the mobility of screw dislocations in bcc iron10.1016/j.actamat.2012.03.033 ↗
32. Computing critical energy release rates for fracture in atomistic simulations10.1016/j.commatsci.2020.109738 ↗
33. Fundamental insights on ductile to brittle transition phenomenon in ferritic steel
34. Ductile-to-brittle fracture transition in polycrystalline nickel under tensile hydrostatic stress10.1016/j.commatsci.2015.07.022 ↗
35. Atomistic simulation of temperature dependence of tensile properties and estimation of DBTT of Cu–Ag core–shell nanowires10.1016/j.commatsci.2024.113156 ↗
36. Strain-rate dependence of the brittle-to-ductile transition temperature in tungsten10.1080/14786430701253197 ↗
37. Numerical investigation of the brittle-to-ductile transition temperature of rolled high-purity tungsten10.1016/j.mechmat.2020.103394 ↗
38. LAMMPS-a flexible simulation tool for particle-based materials modeling at the atomic, meso, and continuum scales10.1016/j.cpc.2021.108171 ↗
39. On the binding of nanometric hydrogen–helium clusters in tungsten
40. Crystallographic and temperature effects in low-energy collisions for plasma-material interactions
41. Interaction of 1/2<111>interstitial dislocation loop with hydrogen and helium in tungsten: molecular dynamics simulation10.1088/2053-1591/acf0a0 ↗
42. Atomistically-informed hardening and kinetics models of helium bubble in irradiated tungsten10.1016/j.ijplas.2023.103620 ↗
43. A molecular dynamics study on the influence of vacancies and interstitial helium on mechanical properties of tungsten10.1016/j.jnucmat.2023.154378 ↗
44. Interatomic potential to study plastic deformation in tungsten-rhenium alloys10.1063/1.4982361 ↗
45. Influence of rhenium-decorated dislocation loops on edge dislocation gliding in tungsten10.1016/j.scriptamat.2023.115624 ↗
46. A new analytical surface energy model for arbitrary (h k l)planes in BCC and FCC metals
47. Effects of interatomic potential on fracture behaviour in single- and bicrystalline tungsten10.1016/j.commatsci.2022.111283 ↗
48. Visualization and analysis of atomistic simulation data with OVITO–the Open Visualization Tool10.1088/0965-0393/18/1/015012 ↗
49. Automated identification and indexing of dislocations in crystal interfaces10.1088/0965-0393/20/8/085007 ↗
50. A.S. Clarke, H. Jónsson, Structural changes accompanying densification of random hard-sphere packings, Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics 47(6) (1993) 3975–3984.10.1103/PhysRevE.47.3975 ↗
51. Spallation of polycrystalline tungsten using laser-induced shock at ultrahigh strain rates10.1016/j.ijimpeng.2022.104243 ↗
52. Segregation-enhanced grain boundary embrittlement of recrystallised tungsten evidenced by site-specific microcantilever fracture10.1016/j.actamat.2023.119256 ↗
53. Constraint effect on the brittle-to-ductile transition of single-crystal iron induced by dislocation mobility10.1016/j.ijmecsci.2018.09.047 ↗
54. Dislocation nucleation from a crack tip: an analysis based on the Peierls concept10.1016/S0022-5096(05)80012-2 ↗
55. François · 2013 · 265
56. The toughness transition curve of a ship steel10.1016/S1566-1369(02)80043-7 ↗
57. Dynamic fracture behaviour of thermo-mechanically processed modified 9Cr–1Mo steel10.1016/j.engfracmech.2015.09.051 ↗
58. Effect of MnS inclusion and crystallographic texture on anisotropy in Charpy impact toughness of low carbon ferritic steel10.1016/j.msea.2015.12.047 ↗
59. Fitting curves to toughness data10.1520/JTE11508J ↗
60. The interactions between rhenium and interstitial-type defects in bulk tungsten: a combined study by molecular dynamics and molecular statics simulations10.1016/j.jnucmat.2019.05.003 ↗
61. Experimental evaluation of effective surface energy for cleavage microcrack propagation across grain boundary in steels10.1016/j.actamat.2018.02.057 ↗
62. Bridging microstructure and crystallography with the micromechanics of cleavage fracture in a lamellar pearlitic steel10.1016/j.actamat.2021.116988 ↗