High-temperature microstructure evolution of an advanced intermetallic nano-lamellar γ-TiAl-based alloy and associated diffusion processes
Source abstract
Abstract
Nano-lamellar advanced γ-TiAl based alloys doped with small amounts of C and Si are being developed to improve the creep resistance in order to increase the performances of this kind of alloys applied in the low-pressure turbine of aircraft engines. In order to extend the service temperature up to 1073 K or even above, the control of the microstructure stability is key. In this work, a complete study of the microstructure evolution during high-temperature exposure up to 1153 K has been approached through different electron microscopy techniques including HRTEM and HRSTEM with microanalysis. The nucleation and growth of the ordered βo precipitates and the ζ silicides inside the α2 lamellae has been carefully characterized and new orientation relationships and the misfit between all crystalline lattices has been determined, as well as the chemical concentration of the different atomic species on each phase. The electron microscopy study shows that βo and ζ precipitates inside α2 prevents or retards the dissolution of the α2 lamellae and its final disintegration in favor of the γ lamellae. This phenomenon has been discussed in terms of the phase coherence and diffusion processes. These important results allow conclude that: the coarsening of the γ lamellae is delayed because of the βo and ζ precipitation, allowing to explain the observed enhancement of the creep resistance in this γ-TiAl based alloy exhibiting a nano-lamellar microstructure.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · nanoparticles nucleation surface interactions · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. European Union Aviation Safety Agency (EASA), 2019 Aviation Environmental Report. https://www.easa.europa.eu/eaer/.
2. Transport & Environment, 2018 Road Map to Decarbonising European Aviation. https://www.transportenvironment.org/discover/roadmap-decarbonising-european-aviation/.
3. Microstructure and deformation of two-phase γ-titanium aluminides10.1016/S0927-796X(97)00018-1 ↗
4. Processing and applications of intermetallic γ-TiAl-based alloys10.1002/1527-2648(200009)2:9<551::AID-ADEM551>3.0.CO;2-U ↗
5. H. Kestler, H. Clemens, in: C. Leyens, M. Peters (Eds.), Titanium and Titanium Alloys, Wiley-VCH, Weinheim, Germany, 2003, pp. 351–392.10.1002/3527602119.ch14 ↗
6. F. Appel, J.D.H. Paul, M. Oehring, Gamma Titanium Aluminide Alloys, Wiley-VCH, Weinheim, Germany, 2011.10.1002/9783527636204 ↗
7. Design, processing, microstructure, properties, and applications of advanced intermetallic TiAl alloys10.1002/adem.201200231 ↗
8. Modelling concepts for intermetallic titanium aluminides10.1016/j.pmatsci.2016.01.001 ↗
9. Design of novel β-solidifying TiAl alloys with adjustable β/B2-phase fraction and excellent hot-workability10.1002/adem.200800164 ↗
10. TiAl alloys in commercial aircraft engines10.1080/09603409.2016.1183068 ↗
11. Forged intermetallic γ-TiAl based alloy low pressure turbine blade in the geared turbofan
12. Emission mitigation potential of ligtweight intermetallic TiAl components10.1016/j.intermet.2010.11.019 ↗
13. Effects of lamellar spacing, volume fraction and grain size on creep strength of fully lamellar TiAl alloys10.1016/S0921-5093(97)00612-6 ↗
14. The effect of lamellar lath spacing on creep behavior of Ti-47at%Al10.1016/S1359-6462(98)00014-1 ↗
15. Creep behavior of γ-TiAl sheet material with differently spaced fully lamellar microstructures10.1016/S0921-5093(01)01639-2 ↗
16. Interaction of dislocations with an applied stress in anisotropic crystals10.1103/PhysRev.116.1113 ↗
17. Hirth · 1982
18. Coherency stresses and interface related deformation phenomena in two phase titanium aluminides10.1016/S0966-9795(99)00030-8 ↗
19. Mechanical behavior and related microstructural aspects of a nano-lamellar TiAl alloy at elevated temperatures10.1016/j.actamat.2017.02.050 ↗
20. Site occupancy in solid-solutions of Nb in the intermetallic compounds TiAl and Ti3Al10.1016/0036-9748(86)90139-0 ↗
21. Concentration and temperature dependence of titanium self-diffusion and interdiffusion in the intermetallic phase Ti3Al10.1016/0966-9795(96)00060-X ↗
22. Interstitial and substitutional diffusion of metallic solutes in Ti3Al10.1016/S0966-9795(98)00115-0 ↗
23. The site occupancies of alloying elements in TiAl and Ti3Al alloys10.1016/S1359-6454(99)00006-3 ↗
24. Self-diffusion in γ-TiAl: an experimental study and atomistic calculations10.1016/S0966-9795(98)00117-4 ↗
25. Diffusion in the Ti-Al system10.1016/S1359-6454(99)00400-0 ↗
26. Atomic relaxation processes in an intermetallic Ti-43Al-4Nb-1Mo-0.1B alloy studied by mechanical spectroscopy10.1016/j.actamat.2013.10.075 ↗
27. High temperature internal friction in a Ti-46Al-1Mo-0.2Si intermetallic, comparison with creep behaviour10.1016/j.actamat.2015.09.052 ↗
28. Internal friction and atomic relaxation processes in an intermetallic Mo-rich Ti-44Al-7Mo (γ+β0) model alloy10.1016/j.msea.2017.06.014 ↗
29. High-temperature phenomena in advanced intermetallic nano-lamellar γ-TiAl alloy. Part I: internal friction and atomic relaxation processes10.1016/j.actamat.2020.09.025 ↗
30. Influence of Nb on Ti diffusion in γ-TiAl intermetallics studied by mechanical spectroscopy10.1016/j.jallcom.2021.158880 ↗
31. J. San Juan, M. Oehring, H. Clemens, 2023 M.L. Nó. To be published.
32. Effect of carbon addition on solidification behavior, phase evolution and creep properties of an intermetallic β-stabilized γ-TiAl alloy10.1016/j.intermet.2013.11.011 ↗
33. Carbon distribution in multi-phase γ-TiAl based alloys and its influence on mechanical properties and phase transformation10.1016/j.actamat.2015.04.055 ↗
34. Silicon distribution and silicide precipitation during annealing in an advanced multi-phase γ-TiAl based alloy10.1016/j.actamat.2016.03.050 ↗
35. Enhancement of creep properties and microstructural stability of intermetallic β-solidifying γ-TiAl based alloys10.1016/j.intermet.2015.03.017 ↗
36. Reed · 2006
37. Relations between the electron work function and certain physical properties in silicides of group IV transition metals
38. Microstructure and phase relationships in a rapidly solidified dual phase alloy based on Ti3(Al,Si)+Ti5(Si,Al)310.1016/0921-5093(92)90183-2 ↗
39. A high-resolution transmission electron microscopy studyof interfaces between the γ, B2 and α2 phases in a Ti-Al alloy10.1007/BF02649820 ↗
40. Ordered domains in TiAl coexisiting with Ti3Al in the lamellar structure of Ti-rich TiAl compounds10.1080/01418619208201574 ↗
41. A quantitative TEM analysis of the lamellar microstructure in TiAl based alloys10.1016/S1359-6454(96)00398-9 ↗
42. Blackburn · 1970 · p. 633
43. Characterization of the precipitation process in a TiAl-based alloy with carbon and silicon additions10.1080/095008398178264 ↗
44. Mechanisms and effects of microstructure on creep of TiAl-based alloys10.1016/S0921-5093(01)01659-8 ↗
45. Phase equilibria among alpha (hcp), beta (bcc) and gamma (L10) phases in TiAl base ternary alloys10.1016/S0966-9795(00)00015-7 ↗
46. The Al-B-Nb-Ti system. IV. Experimental study and thermodynamic re-evaluation of the binary Al-Nb and ternary Al-Nb-Ti systems10.1016/j.jallcom.2008.05.008 ↗
47. Interstitial solubility in γ and α2 phases of TiAl-based alloys10.1016/S1359-6454(96)00111-5 ↗
48. High carbon solubility in a γ-TiAl-based Ti-45Al-5Nb-0.5C alloy and its effect on hardening10.1016/j.actamat.2008.11.037 ↗
49. Investigation of carbides in Ti-45Al-5Nb-xC alloys (0≤x≤1) by transmission electron microscopy and high energy-XRD10.1016/j.intermet.2012.09.023 ↗
50. Evolution of the ωo phase in β-stabilized multi-phase TiAl alloy and its effect on hardness10.1016/j.actamat.2013.10.036 ↗
51. Ordered α2 to ωo phase transformations in high Nb containing TiAl alloy10.1016/j.actamat.2015.03.025 ↗
52. Impact of Mo on the ωo phase in β-solidifying TiAl alloys: an experimental and computational approach10.1016/j.intermet.2017.01.011 ↗
53. A review of the metastable omega phase in beta titanium alloys: the phase transformation mechanisms and its effect on mechanical properties
54. Preferential site occupancy of alloying elements in TiAl-based phases10.1063/1.4951009 ↗
55. Structural stability and mechanical properties of TiAl+Mo alloys: a comprehensive ab initio study10.1016/j.actamat.2021.117427 ↗
56. Tracer diffusion behavior of Ga as an Al-substituting element in Ti3Al and TiAl intermetallic compounds10.1016/S0966-9795(99)00028-X ↗