High wide-temperature-range thermoelectric performance in GeTe through hetero-nanostructuring
Source abstract
Abstract
GeTe is emerging as promising medium-temperature thermoelectric material due to its highly competitive performance and good mechanical properties. Strong Rashba spin splitting was harnessed to markedly improve the Seebeck coefficient and power factor of Bi and Sn codoped GeTe at low-medium temperature. Moreover, it is found that Bi-Sn-Cu doping reduces the phase-transition temperature to extend better electrical transport behavior of cubic phase to low temperature. As a result, the electrical transport properties in low-medium temperature were overall enhanced. In the meanwhile, endotaxial hetero-nanostructures efficiently scatter phonons and play a dominant role on affecting phonon propagation. The lattice thermal conductivity was reduced to 0.2 W m −1 K −1 at 673 K. Drive by strengthening Rashba effect and endotaxial hetero-nanostructures, a record-high average ZT (300–823 K) of 1.6 and a high ZT of 2.1 were obtained in lead-free GeTe-based compounds. The vast increase of ZT promotes GeTe as a promising candidate for a wide range of applications in waste heat recovery and power generation.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · Phase-change materials and chalcogenides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Cooling, heating, generating power, and recovering waste heat with thermoelectric systems10.1126/science.1158899 ↗
2. Stabilizing the optimal carrier concentration for high thermoelectric efficiency10.1002/adma.201103153 ↗
3. High-performance n-type PbSe-Cu2Se thermoelectrics through conduction band engineering and phonon softening10.1021/jacs.8b10448 ↗
4. Anharmonic convergence: tuning two dials on phonons for high ZT in p-type PbTe10.1016/j.joule.2019.04.014 ↗
5. Resonant bonding in crystalline phase-change materials10.1038/nmat2226 ↗
6. High thermoelectric performance realized in a BiCuSeO system by improving carrier mobility through 3D modulation doping10.1021/ja507945h ↗
7. Higher mobility in bulk semiconductors by separating the dopants from the charge-conducting band – a case study of thermoelectric PbSe10.1039/C5MH00021A ↗
8. High-performance bulk thermoelectrics with all-scale hierarchical architectures10.1038/nature11439 ↗
9. High thermoelectric performance via hierarchical compositionally alloyed nanostructures10.1021/ja403134b ↗
10. Vacancy-induced dislocations within grains for high-performance PbSe thermoelectrics10.1038/ncomms13828 ↗
11. High-thermoelectric performance of nanostructured bismuth antimony telluride bulk alloys10.1126/science.1156446 ↗
12. Ferroelectric instability induced ultralow thermal conductivity and high thermoelectric performance in rhombohedral p-type GeSe crystal10.1021/jacs.0c03696 ↗
13. Engineering ferroelectric instability to achieve ultralow thermal conductivity and high thermoelectric performance in Sn1−xGexTe10.1039/C8EE03162B ↗
14. Complex thermoelectric materials10.1038/nmat2090 ↗
15. Zhang · Joule · 2020 · 4 · 98610.1016/j.joule.2020.03.004 ↗
16. Influence of GeP precipitates on the thermoelectric properties of p-type GeTe and Ge0.9−xPxSb0.1Te compounds10.1039/C8CE01134F ↗
17. All-scale hierarchical nanostructures and superior valence band convergence lead to ultra-high thermoelectric performance in cubic GeTe10.1039/D2EE02752F ↗
18. High thermoelectric performance achieved in GeTe–Bi2Te3 pseudo-binary via van der waals gap-induced hierarchical ferroelectric domain structure
19. Dilute Cu2Te-alloying enables extraordinary performance of r-GeTe thermoelectrics
20. Simultaneous optimization of carrier concentration and alloy scattering for ultrahigh performance gete thermoelectrics10.1002/advs.201700341 ↗
21. Medium-temperature thermoelectric GeTe: vacancy suppression and band structure engineering leading to high performance10.1039/C9EE00317G ↗
22. Low-symmetry rhombohedral GeTe thermoelectrics10.1016/j.joule.2018.02.016 ↗
23. Evolution of defect structures leading to high ZT in GeTe-based thermoelectric materials10.1038/s41467-022-33774-z ↗
24. Ultralow lattice thermal conductivity and high thermoelectric performance in Ge1-x-yBixCayTe with ultrafine ferroelectric domain structure10.1021/acsami.3c03365 ↗
25. Achieving ultralow lattice thermal conductivity and high thermoelectric performance in GeTe alloys via introducing Cu2Te nanocrystals and resonant level doping10.1021/acsnano.1c05650 ↗
26. Ferroelectric order in individual nanometre-scale crystals10.1038/nmat3371 ↗
27. Advances in thermoelectric materials research: Looking back and moving forward10.1126/science.aak9997 ↗
28. Rashba effect maximizes thermoelectric performance of GeTe derivatives10.1016/j.joule.2020.07.021 ↗
29. Positive effect of Ge vacancies on facilitating band convergence and suppressing bipolar transport in GeTe-based alloys for high thermoelectric performance
30. Ultralow lattice thermal conductivity and superhigh thermoelectric figure-of-merit in (Mg, Bi) co-doped GeTe10.1002/adma.202008773 ↗
31. Realization of high thermoelectric figure of merit in GeTe by complementary co-doping of Bi and In10.1016/j.joule.2019.08.017 ↗
32. High-performance GeTe thermoelectrics in both rhombohedral and cubic phases10.1021/jacs.8b09147 ↗
33. Ultralow thermal conductivity, enhanced mechanical stability, and high thermoelectric performance in (GeTe)1-2x(SnSe)x(SnS)x10.1021/jacs.0c11015 ↗
34. High carrier mobility and high figure of merit in the CuBiSe2 alloyed GeTe10.1002/aenm.202102913 ↗
35. Tailoring the phase transition temperature to achieve high-performance cubic GeTe-based thermoelectrics10.1039/D0TA06013E ↗
36. Realizing a 14% single-leg thermoelectric efficiency in GeTe alloys10.1126/sciadv.abf2738 ↗
37. Hierarchical twinning and light impurity doping enable high-performance GeTe thermoelectrics10.1016/j.actamat.2021.117406 ↗
38. Stacking faults modulation for scattering optimization in GeTe-based thermoelectric materials10.1016/j.nanoen.2019.104347 ↗
39. Realizing high thermoelectric performance in GeTe through optimizing Ge vacancies and manipulating Ge precipitates10.1021/acsaem.9b01585 ↗
40. Leverage between spinodal fluctuations and athermal transformation in dilute PbTe alloying GeTe thermoelectrics10.1021/acsaem.2c01497 ↗
41. Spinodal decomposition of magnetic ions in Eu-codoped Ge1-xCrxTe10.12693/APhysPolA.122.1012 ↗
42. Compositional fluctuations locked by athermal transformation yielding high thermoelectric performance in GeTe10.1002/adma.202005612 ↗
43. Evidence from Fram Strait (78°N) for Early Deglaciation10.1038/336056a0 ↗
44. Synergistic band convergence and endotaxial nanostructuring: Achieving ultralow lattice thermal conductivity and high figure of merit in eco-friendly SnTe10.1016/j.nanoen.2019.104261 ↗
45. Raising the thermoelectric performance of p-type PbS with endotaxial nanostructuring and valence-band offset engineering using CdS and ZnS10.1021/ja306527n ↗
46. Strained endotaxial nanostructures with high thermoelectric figure of merit10.1038/nchem.955 ↗
47. Weighted mobility10.1002/adma.202001537 ↗
48. Band sharpening and band alignment enable high quality factor to enhance thermoelectric performance in n-Type PbS10.1021/jacs.0c00306 ↗
49. Bi–Zn codoping in GeTe synergistically enhances band convergence and phonon scattering for high thermoelectric performance10.1039/D0TA08700A ↗
50. Electronic origin of the high thermoelectric performance of GeTe among the p-type group IV monotellurides10.1038/am.2017.8 ↗
51. Entropy engineering promotes thermoelectric performance in p-type chalcogenides10.1038/s41467-021-23569-z ↗