In situ study and assessment of the phosphorus-induced solute drag effect on the grain boundary mobility of austenite
Source abstract
Abstract
The solute drag effect of phosphorus (P) in the single-phase austenite (γ-Fe) region was studied under isothermal annealing conditions at temperatures of 1050°C, 1150°C, 1250°C and 1350°C. High-temperature laser scanning confocal microscopy (HT-LSCM) was used to observe and quantify in situ grain growth on the surface of three different samples containing 0.026 wt.-% P, 0.044 wt.-% P and 0.102 wt.-% P. The dependence of the arithmetic mean grain sizes on time and temperature were modeled mathematically using a simple ordinary differential equation (ODE) according to normal grain growth (NGG) theory. As no other major effects, i.e., Zener-pinning by precipitates, occurred under the selected experimental conditions, grain growth interference was only considered by grain boundary (GB) segregation of P. Thus, the total grain boundary mobility (M) was directly determined depending on the P content and isothermal annealing temperature. The fitted GB mobility values enabled the determination of an average binding energy value between impurity P atoms and grain boundaries (E0 = -1.1 - -0.6 eV) in the system. Finally, the GB segregation of P in γ-Fe was derived from the observed grain growth kinetics. The results showed reasonable agreement with calculations using segregation enthalpies from the literature.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Minerals Flotation and Separation Techniques · Materials Engineering and Processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Buschow · 2001
2. Gottstein · 2014
3. Mouritz · 2012
4. Kakani · 2004 · 101
5. Callister · 2005
6. The mechanism of grain boundary migration10.1016/0001-6160(69)90115-1 ↗
7. A more accurate three-dimensional grain growth algorithm10.1016/j.actamat.2011.07.052 ↗
8. Schwerdtfeger · 1994
9. Hot ductility of steels and its realtionship to the problem of transverse cracking during continuous casting10.1179/imr.1991.36.1.187 ↗
10. Surface cracking mechanism of continuously cast low carbon low alloy steel slabs10.1179/mst.1990.6.9.793 ↗
11. Impurities, segregation and creep embrittlement
12. The impurity drag effect in grain boundary motion10.1016/0001-6160(62)90092-5 ↗
13. Grain growth stagnation by inclusions or pores10.1007/BF03222320 ↗
14. Gottstein · 2010
15. 3D finite element simulation of the inhibition of normal grain growth by particles10.1016/j.actamat.2004.10.044 ↗
16. Grain boundary segregation, solute drag and abnormal grain growth10.1016/j.actamat.2008.04.007 ↗
17. Lejcek · 2010
18. Solute drag and dynamic phase transformations in moving grain boundaries10.1016/j.actamat.2019.08.046 ↗
19. Thermodynamics, microstructures and plasticity
20. Grain boundaries in metals10.1063/1.3062658 ↗
21. Surface and grain boundary segregation on and in iron10.1002/srin.198600750 ↗
22. A quantitative theory of grain-boundary motion and recrystallization in metals in the presence of impurities10.1016/0001-6160(57)90109-8 ↗
23. On the theory of impurity controlled grain boundary motion10.1016/0001-6160(71)90041-1 ↗
24. Segregations in steels during heat treatment – A consideration along the process chain10.1515/htm-2020-0006 ↗
25. Influence of phosphorus content and quenching/tempering temperatures on fracture toughness and fatigue life of SAE 5160 steel10.1590/S1516-14392010000400005 ↗
26. Temper embrittlement in a Ni-Cr steel containing phosphorus as impurity10.1007/BF02662740 ↗
27. Temper embrittlement of Ni-Cr Steels by phosphorus10.1007/BF02656602 ↗
28. Effect of Phosphorus on the Magnetic Losses of Non-oriented 2% Si Steel10.2355/isijinternational.52.1162 ↗
29. Relation of ductile-to-brittle transition temperature to phosphorus grain boundary segregation for a Ti-stabilized interstitial free steel10.1016/j.msea.2011.08.002 ↗
30. Effect of the Addition of P on the Mechanical Properties of Low Alloyed TRIP Steels10.2355/isijinternational.46.1251 ↗
31. The effect of aluminium and phosphorus on the stability of individual austenite grains in TRIP steels10.1016/j.actamat.2008.09.040 ↗
32. Grain boundary segregation of elements of groups 14 and 15 and its consequences for intergranular cohesion of ferritic iron10.1007/s10853-017-0819-x ↗
33. Effect of grain size on grain boundary segregation thermodynamics of phosphorus in interstitial-free and 2.25Cr-1Mo steels10.3390/met7110470 ↗
34. Segregation of phosphorus in austenite in Fe–P and Fe–10Mn–P alloys10.1179/mst.1989.5.2.148 ↗
35. Phosphorus segregation in austenite in Fe-P-C, Fe-P-B and Fe-P-C-B alloys10.1002/srin.198801524 ↗
36. Korngrenzensegregation des Phosphors im Austenit und Einfluß von Kohlenstoff10.1007/BF00469164 ↗
37. E04 Committee, Test methods for determining average grain size, West Conshohocken, Pennsylvania, USA American Society for Testing and Materials International (2021).
38. Analytical modelling of grain growth in metals and alloys in the presence of growing and dissolving precipitates—I. Normal grain growth10.1016/0956-7151(94)00488-4 ↗
39. Grain boundary mobility of γ-Fe in high-purity iron during isothermal annealing10.1016/j.scriptamat.2023.115431 ↗
40. Characterization of the γ-loop in the Fe-P system by coupling DSC and HT-LSCM with complementary in-situ experimental techniques10.1016/j.matchar.2021.111030 ↗
41. Experimental study of high temperature phase equilibria in the iron-rich part of the Fe-P and Fe-C-P systems10.1007/s11661-020-05912-z ↗
42. Decomposition of γ-Fe in 0.4C-1.8Si-2.8Mn-0.5Al steel during a continuous cooling process: a comparative study using in-situ HT-LSCM, DSC and dilatometry10.1016/j.jmrt.2023.04.009 ↗
43. Austenite grain boundary pinning during reheating by mixed AlN and Nb(C,N) particles10.2355/isijinternational.54.677 ↗
44. Effect of manganese sulphide particle shape on the pinning of grain boundary10.1080/02670836.2016.1258157 ↗
45. Critical evaluation and thermodynamic modeling of the Fe–P and Fe–C–P system
46. FactSage thermochemical software and databases, 2010–201610.1016/j.calphad.2016.05.002 ↗
47. Griesser · 2013
48. In-situ observation of sulfide precipitation in a low carbon, titanium alloyed steel
49. Concentric solidification for high temperature laser scanning confocal microscopy10.2355/isijinternational.44.565 ↗
50. Study on oxide inclusion dissolution in secondary steelmaking slags using high temperature confocal scanning laser microscopy10.1002/srin.201500102 ↗
51. Potential and limitations of direct austenite grain growth measurement by means of HT-LSCM
52. Some considerations on austenite grain growth kinetics from high-temperature laser scanning confocal microscopy observations10.1002/srin.202300547 ↗
53. In-situ observation of austenite grain growth in plain carbon steels by means of high-temperature laser scanning confocal microscopy10.1007/s00501-015-0356-3 ↗
54. Critical examination of the representativeness of austenite grain growth studies performed in situ using HT-LSCM and application to determine growth-inhibiting mechanisms10.1007/s00501-024-01438-8 ↗
55. Analytical modelling of grain growth in metals and alloys in the presence of growing and dissolving precipitates—II. Abnormal grain growth10.1016/0956-7151(94)00489-5 ↗
56. U. Olsson, Journal of Statistics Education 13: Confidence Intervals for the Mean of a Log-Normal Distribution. http://jse.amstat.org/v13n1/olsson.html, Accessed: 13.09 2022.10.1080/10691898.2005.11910638 ↗
57. Analytical modelling of grain growth in metals and alloys in the prescence of growing and disolving precipitates-I Normal grain growth10.1016/0956-7151(94)00488-4 ↗
58. Nonisothermal austenite grain growth kinetics in a microalloyed X80 linepipe steel10.1007/s11661-010-0376-2 ↗
59. Austenite grain growth in high manganese steels10.1007/s11661-019-05460-1 ↗
60. Austenite grain growth in a 2.25Cr-1Mo vanadium-free steel accounting for zener pinning and solute drag: experimental study and modeling10.1007/s11661-017-4002-4 ↗
61. A unified theory of recovery, recrystallization and grain growth, based on the stability and growth of cellular microstructures—I. The basic model10.1016/S1359-6454(97)00070-0 ↗
62. Austenite grain growth kinetics in Al-killed plain carbon steels10.1007/BF02595433 ↗
63. Austenite grain growth in a nuclear pressure vessel steel10.1016/j.msea.2013.01.005 ↗
64. Drag effects on grain growth dynamics10.1016/j.commatsci.2012.10.012 ↗
65. A new study on the growth behavior of austenite grains during heating processes10.1038/s41598-017-04371-8 ↗
66. Study of grain-growth kinetics in delta-ferrite and austenite with application to thin-slab cast direct-rolling microalloyed steels10.1007/s11661-010-0246-y ↗
67. Prediction for the austenite grain size in the presence of growing particles in the weld HAZ of Ti-microalloyed steel10.1016/j.msea.2006.12.073 ↗
68. Grain-boundary migration and grain growth10.1179/msc.1974.8.1.143 ↗
69. Diffusion and interface control of reactions in alloys10.1007/BF02673664 ↗
70. Trends in grain boundary mobility: survey of motion mechanisms10.1007/s11837-013-0801-2 ↗
71. A solute pinning approach to solute drag in multi-component solid solution alloys
72. On the time exponent in isothermal grain growth10.1007/BF03038435 ↗
73. Humphreys · 2004
74. Lattice constant of iron and austenite including its supersaturation phase of carbon10.2355/isijinternational.45.1789 ↗
75. A model for static recrystallization with simultaneous precipitation and solute drag10.1007/s11661-016-3524-5 ↗
76. Evaluating the effect of the competition between NbC precipitation and grain size evolution on the hot ductility of Nb containing steels10.2355/isijinternational.ISIJINT-2018-716 ↗
77. Austenite grain growth prediction coupling with drag and pinning effects in low carbon Nb microalloyed steels10.1179/1743284711Y.0000000001 ↗
78. A model for the competition of precipitation and recrystallization in deformed austenite10.1016/S1359-6454(01)00315-9 ↗
79. Askill · 1970
80. CODATA recommended values of the fundamental physical constants: 201810.1103/RevModPhys.93.025010 ↗
81. D.B. Newell and E. Tiesinga, The international system of units (SI). Gaithersburg, Maryland (2019).10.6028/NIST.SP.330-2019 ↗
82. The spectrum of binding energies approach to grain boundary segregation10.1007/BF02642853 ↗
83. Interaction of the solute niobium or molybdenum with grain boundaries in α-iron10.1016/S0921-5093(02)00678-0 ↗
84. Role of grain boundary character and its evolution on interfacial solute segregation behavior in nanocrystalline Ni-P10.1016/j.actamat.2020.03.012 ↗
85. Solute drag assessment of grain boundary migration in Au10.1016/j.actamat.2021.117473 ↗
86. Atomistically informed phase field study of austenite grain growth10.1016/j.commatsci.2023.112300 ↗
87. Grain-boundary migration in the presence of diffusing impurities: simulations and analytical models10.1080/01418610108217146 ↗
88. Comparison of ab-initio solute-boundary binding energies and experimental recrystallization data in austenite for solute Nb and other elements10.2355/isijinternational.ISIJINT-2017-096 ↗
89. Grain boundary decohesion by impurity segregation in a nickel-sulfur system10.1126/science.1104624 ↗
90. First-principles analysis of the grain boundary segregation of transition metal alloying elements in γFe10.1016/j.commatsci.2021.111050 ↗
91. Non-equilibrium grain-boundary segregation kinetics10.1007/BF01160590 ↗
92. Non-equilibrium grain-boundary segregation in austenitic alloys10.1007/BF00738626 ↗
93. The effect of thermal grooving on grain boundary motion10.1016/0001-6160(58)90020-8 ↗
94. Revealing austenite grain boundaries by thermal etching: advantages and disadvantages10.1016/S1044-5803(03)00002-0 ↗
95. Effect of solute and orientation on the mobility of near-coincidence tilt boundaries in high-purity aluminum10.1016/0001-6160(75)90033-4 ↗
96. Thermisch aktivierte Korngrenzenwanderung in gewalzten Goldeinkristallen unter dem Einfluss gelöster Fremdatome10.1016/0001-6160(70)90026-X ↗
97. Theory of grain boundary migration rates10.1007/BF03397362 ↗
98. Recrystallization and grain growth10.1016/0502-8205(52)90009-9 ↗
99. Grain boundary mobility – a brief review
100. Equilibrium segregation in a ternary solution: a model for temper embrittlement10.1016/0039-6028(75)90125-9 ↗