Critical impacts of thermodynamic instability and short-range order on deformation mechanisms of VCoNi medium-entropy alloy
Source abstract
Abstract
Short-range order (SRO) has made a splash in the recent research on multi-principal element alloys (MPEAs), among which the equiatomic VCoNi alloy was regarded as the most potential prototype. However, in addition to disputes over SRO, there is still a lack of agreements on the phase stability and deformation mechanism of the VCoNi alloy, which should be addressed before the SRO can be independently analyzed. To this end, microstructural evolutions with increasing long-term annealing temperatures (from 700 to 1,200 °C) were first inspected in detail to determine critical temperatures for phase transitions unambiguously. Our results revealed that the VCoNi alloy was still dominated by the face-centered-cubic (FCC) structure with a minor κ phase at 900 °C and became a single FCC solid solution at above 910 °C. Subsequently, by carefully examining dislocation configurations and stacking fault (SF) widths in the FCC phases annealed at 900 °C and 1,200 °C, significant variations in local stacking fault energy (SFE) were unveiled, and the overall SFE decreased with increasing annealing temperature. Combined with the state-of-the-art density function theory (DFT)-based lattice Monte Carlo (MC) simulation, we demonstrated how the rise/decline in SFE can be explained by the greater/lower degree of SRO. This research would not only offer new perspectives for recent controversies over phase stability, deformation mechanism, and SRO characterization technique using electron diffraction but also shed light on the intrinsic relationship between SRO and local stacking fault energy of MPEAs.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Intermetallics and Advanced Alloy Properties · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (93)
Show source-provided references
1. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
2. Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys10.1016/j.pmatsci.2018.12.003 ↗
3. High-entropy alloys10.1038/s41578-019-0121-4 ↗
4. High entropy alloys: a focused review of mechanical properties and deformation mechanisms10.1016/j.actamat.2019.12.015 ↗
5. A perspective on the catalysis using the high entropy alloys
6. Review and outlook on high-entropy alloys for hydrogen storage10.1039/D1EE01543E ↗
7. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
8. Recent progress in high entropy alloys10.3166/acsm.31.633-648 ↗
9. Single-phase high-entropy alloys–A critical update10.1016/j.matchar.2020.110179 ↗
10. Characterization of chemical local ordering and heterogeneity in high-entropy alloys10.1557/s43577-022-00277-7 ↗
11. Reconsidering short-range order in complex concentrated alloys10.1557/s43577-023-00555-y ↗
12. Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation10.1016/j.actamat.2015.06.025 ↗
13. Precipitation in the equiatomic high-entropy alloy CrMnFeCoNi10.1016/j.scriptamat.2015.10.025 ↗
14. Decomposition of the single-phase high-entropy alloy CrMnFeCoNi after prolonged anneals at intermediate temperatures10.1016/j.actamat.2016.04.005 ↗
15. Consideration of kinetics on intermetallics formation in solid-solution high entropy alloys10.1016/j.actamat.2020.05.015 ↗
16. Atomic-scale properties of Ni-based FCC ternary, and quaternary alloys10.1016/j.actamat.2015.08.015 ↗
17. Local structure and short-range order in a NiCoCr solid solution alloy10.1103/PhysRevLett.118.205501 ↗
18. Tunable stacking fault energies by tailoring local chemical order in CrCoNi medium-entropy alloys10.1073/pnas.1808660115 ↗
19. Short-range order and its impact on the CrCoNi medium-entropy alloy10.1038/s41586-020-2275-z ↗
20. Chemical medium-range order in a medium-entropy alloy10.1038/s41467-022-28687-w ↗
21. Atomic-scale evidence of chemical short-range order in CrCoNi medium-entropy alloy10.1016/j.actamat.2021.117490 ↗
22. Chemical short-range orders and the induced structural transition in high-entropy alloys10.1016/j.scriptamat.2017.09.049 ↗
23. Chemical short range order strengthening in a model FCC high entropy alloy10.1016/j.actamat.2020.02.041 ↗
24. Direct observation of chemical short-range order in a medium-entropy alloy10.1038/s41586-021-03428-z ↗
25. Chemical short range order strengthening in BCC complex concentrated alloys10.1016/j.actamat.2021.117012 ↗
26. Yield strength and misfit volumes of NiCoCr and implications for short-range-order10.1038/s41467-020-16083-1 ↗
27. Determination of peak ordering in the CrCoNi medium-entropy alloy via nanoindentation10.1016/j.actamat.2022.118380 ↗
28. Direct observation of local chemical ordering in a few nanometer range in CoCrNi medium-entropy alloy by atom probe tomography and its impact on mechanical properties
29. Evolution of short-range order and its effects on the plastic deformation behavior of single crystals of the equiatomic Cr-Co-Ni medium-entropy alloy10.1016/j.actamat.2022.118537 ↗
30. Extra electron reflections in concentrated alloys do not necessitate short-range order10.1038/s41563-023-01570-9 ↗
31. On the origin of diffuse intensities in fcc electron diffraction patterns10.1038/s41586-023-06530-6 ↗
32. Local atomic arrangements in binary alloys10.1016/S0079-6425(99)00005-5 ↗
33. An electron diffraction study of short-range order in quenched Ni4Mo alloy10.1016/0001-6160(76)90098-5 ↗
34. Investigation of short-range order by electrical resistivity measurement10.1016/0001-6160(88)90192-7 ↗
35. Local order in Cr-Fe-Co-Ni: experiment and electronic structure calculations10.1103/PhysRevB.99.014206 ↗
36. Short-range chemical order and local lattice distortion in a compositionally complex alloy10.1016/j.actamat.2020.04.034 ↗
37. Structure motif of chemical short-range order in a medium-entropy alloy10.1080/21663831.2022.2029607 ↗
38. Radiation-assisted chemical short-range order formation in high-entropy alloys10.1016/j.scriptamat.2022.114547 ↗
39. Mechanically derived short-range order and its impact on the multi-principal-element alloys10.1038/s41467-022-34470-8 ↗
40. Effects of annealing on hardness, yield strength and dislocation structure in single crystals of the equiatomic Cr-Mn-Fe-Co-Ni high entropy alloy10.1016/j.scriptamat.2020.09.039 ↗
41. Plastic deformation of single crystals of the equiatomic Cr−Mn−Fe−Co−Ni high-entropy alloy in tension and compression from 10 K to 1273 K10.1016/j.actamat.2020.10.073 ↗
42. Tuning element distribution, structure and properties by composition in high-entropy alloys10.1038/s41586-019-1617-1 ↗
43. The origin of negative stacking fault energies and nano-twin formation in face-centered cubic high entropy alloys10.1016/j.scriptamat.2016.11.014 ↗
44. Stacking fault energies of face-centered cubic concentrated solid solution alloys10.1016/j.actamat.2017.05.001 ↗
45. Critical stress for twinning nucleation in CrCoNi-based medium and high entropy alloys10.1016/j.actamat.2018.02.037 ↗
46. Decoupling between Shockley partials and stacking faults strengthens multiprincipal element alloys10.1073/pnas.2114167118 ↗
47. Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi10.1016/j.actamat.2017.02.036 ↗
48. Stacking fault energy of face-centered-cubic high entropy alloys10.1016/j.intermet.2017.10.004 ↗
49. Atomic-scale characterization and modeling of 60 dislocations in a high-entropy alloy10.1016/j.actamat.2016.03.045 ↗
50. Effects of short range ordering on the generalized stacking fault energy and deformation mechanisms in FCC multiprincipal element alloys10.1016/j.actamat.2023.119230 ↗
51. Short-range order in face-centered cubic VCoNi alloys
52. Ultra strong medium-entropy single-phase alloys designed via severe lattice distortion10.1002/adma.201807142 ↗
53. A strong and ductile medium-entropy alloy resists hydrogen embrittlement and corrosion10.1038/s41467-020-16791-8 ↗
54. High-rate superplasticity in an equiatomic medium-entropy VCoNi alloy enabled through dynamic recrystallization of a duplex microstructure of ordered phases10.1016/j.actamat.2020.03.048 ↗
55. Ultra-strong and strain-hardenable ultrafine-grained medium-entropy alloy via enhanced grain-boundary strengthening10.1080/21663831.2021.1913768 ↗
56. Effects of cryogenic temperature on tensile and impact properties in a medium-entropy VCoNi alloy10.1016/j.jmst.2021.02.034 ↗
57. Liquid helium temperature deformation and local atomic structure of CoNiV medium entropy alloy
58. Deformable κ phase induced deformation twins in a CoNiV medium entropy alloy10.1016/j.ijplas.2022.103509 ↗
59. Optimal and near-optimal filters in high-resolution electron microscopy10.1046/j.1365-2818.1998.3070861.x ↗
60. Quantitative measurement of displacement and strain fields from HREM micrographs10.1016/S0304-3991(98)00035-7 ↗
61. Koch · 2002
62. Ab initio molecular dynamics for liquid metals10.1103/PhysRevB.47.558 ↗
63. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
64. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
65. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
66. Special quasirandom structures10.1103/PhysRevLett.65.353 ↗
67. Efficient stochastic generation of special quasirandom structures10.1016/j.calphad.2013.06.006 ↗
68. Monte Carlo sampling methods using Markov chains and their applications10.1093/biomet/57.1.97 ↗
69. Atomic ordering and structural transformation in the V-Co-Ni ternary alloys10.1007/BF02666205 ↗
70. Physical metallurgy and mechanical properties of ductile ordered alloys (Fe, Co, Ni)3V
71. Long-period ordered structures in the quasi-binary Co3V–Ni3V alloy10.1107/S0021889873008678 ↗
72. The ordering of the sigma phase V62 Co38
73. Close-packed ordered AB3 structures in ternary alloys of certain transition metals
74. Porter · 2021
75. Atom probe tomography investigations of microstructural evolution in an aged nickel superalloy for exhaust applications10.1007/s11661-018-5098-x ↗
76. Lattice misfit during ageing of a polycrystalline nickel-base superalloy10.1016/j.actamat.2013.09.018 ↗
77. Effects of the anisotropy of the anti-phase boundary energy on the yield-stress anomaly in Ni3X compounds with close-packed crystal structures10.1080/09500830701324127 ↗
78. Non-basal slip in Ni3(Ti, Nb) and Ni3(Ti, Al) single crystals with various long-period stacking ordered structures10.1016/j.actamat.2013.04.008 ↗
79. Transmission electron microscopy characterization of dislocation structure in a face-centered cubic high-entropy alloy Al0.1CoCrFeNi10.1016/j.actamat.2017.10.050 ↗
80. Conditions and reasons for incoherent imaging in STEM10.1016/0304-3991(96)00020-4 ↗
81. On spinodal decomposition10.1016/0001-6160(61)90182-1 ↗
82. Diffusion-defining atomic-scale spinodal decomposition within nanoprecipitates10.1038/s41563-018-0209-z ↗
83. Crystal chemistry and Calphad modeling of the σ phase10.1016/j.pmatsci.2007.04.001 ↗
84. Atom distributions in sigma phases. I. Fe and Cr atom distributions in a binary sigma phase equilibrated at 1063, 1013 and 923 K10.1107/S0108768183001974 ↗
85. Can experiment determine the stacking fault energy of metastable alloys?10.1016/j.matdes.2020.109396 ↗
86. The influence of stacking fault energy on the microstructural and strain-hardening evolution of Fe–Mn–Al–Si steels during tensile deformation10.1016/j.actamat.2015.08.030 ↗
87. Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys10.1126/science.aas8815 ↗
88. Nanoparticles-strengthened high-entropy alloys for cryogenic applications showing an exceptional strength-ductility synergy10.1016/j.scriptamat.2019.01.034 ↗
89. Corrosion-resistant L12-strengthened high-entropy alloy with high strength and large ductility10.1016/j.corsci.2023.111593 ↗
90. Quantitative three-dimensional imaging of chemical short-range order via machine learning enhanced atom probe tomography10.1038/s41467-023-43314-y ↗
91. Effect of focal depth of HAADF-STEM imaging on the solute enriched layers in Mg alloys10.2320/matertrans.MAW201505 ↗
92. Data-driven electron-diffraction approach reveals local short-range ordering in CrCoNi with ordering effects10.1038/s41467-022-34335-0 ↗
93. Three-dimensional atomic structure and local chemical order of medium- and high-entropy nanoalloys10.1038/s41586-023-06785-z ↗