Contribution of intragranular misorientations to the cold rolling textures of ferritic stainless steels
Source abstract
Abstract
Abstract A combined experimental and simulation study of intragranular misorientation and texture development in ferritic stainless steels is presented. Cold rolling was performed on materials having different grain shapes to reveal variations of misorientations and texture with variations in microstructure. The experimental results were compared with predictions of the Visco-Plastic Self-Consistent (VPSC) model and the recently developed Grain-Fragmentation Visco-Plastic Self-Consistent (GF-VPSC) model. It is shown that the GF-VPSC model, incorporating the development of intragranular misorientations, provides a much better prediction of the texture strength compared to the standard VPSC model. The predictions of intragranular misorientation are also in good agreement with experimental measurements. Both experiments and simulations point to the importance of anisotropy of intragranular misorientation distributions in determining texture development and, importantly, texture strength.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Comparison of two grain interaction models for polycrystal plasticity and deformation texture prediction10.1016/S0749-6419(00)00102-9 ↗
2. Deformation texture prediction: from the taylor model to the advanced lamel model10.1016/j.ijplas.2004.04.011 ↗
3. A self consistent approach of the large deformation polycrystal viscoplasticity10.1016/0001-6160(87)90297-5 ↗
4. A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: application to zirconium alloys10.1016/0956-7151(93)90130-K ↗
5. Quantitative prediction of textures in aluminium cold rolled to moderate strains10.1016/S0921-5093(01)01966-9 ↗
6. N-Site modeling of a 3D viscoplastic polycrystal using fast fourier transform10.1016/S1359-6454(01)00172-0 ↗
7. Mechanical anisotropy and grain interaction in recrystallized aluminum10.1007/s11661-002-0385-x ↗
8. Quantitative analysis of grain subdivision in cold rolled aluminium10.1016/S1359-6454(01)00150-1 ↗
9. Microstructural evolution of IF-steel during cold rolling10.1016/j.actamat.2003.10.040 ↗
10. Fragmentation of orientation within grains of a cold-rolled interstitial-free steel10.2355/isijinternational.44.187 ↗
11. Orientation image-based micromechanical modelling of subgrain texture evolution in polycrystalline copper10.1016/j.actamat.2008.04.016 ↗
12. Microtexture tracking in hot-deformed polycrystalline aluminium: experimental results10.1016/j.actamat.2009.11.007 ↗
13. Intra-grain orientation distributions in hot-deformed aluminium: orientation dependence and relation to deformation mechanisms10.1016/j.jmps.2015.07.014 ↗
14. Influence of ferrite rolling temperature on microstructure and texture in deformed low c and IF steels10.2355/isijinternational.37.697 ↗
15. Deformation microstructures and textures in steels10.1098/rsta.1999.0385 ↗
16. On modeling the development of crystallographic texture in bulk forming processes10.1016/0749-6419(89)90020-X ↗
17. Deformation banding and copper-type rolling textures10.1016/0956-7151(93)90138-I ↗
18. A model for rolling deformation with grain subdivision. part i: the initial stage10.1016/S0749-6419(00)00059-0 ↗
19. A new approach to crystal spin calculation during deformation texture development10.1016/S1359-6462(00)00432-2 ↗
20. P. Van Houtte, L. Delannay, I. Samajdar, Quantitative Prediction of Cold Rolling Textures in Low-Carbon Steel by Means of the Lamel Model, 1999, 10.1155/TSM.31.10910.1155/TSM.31.109 ↗
21. Grain interaction mechanisms leading to intragranular orientation spread in tensile deformed bulk grains of interstitial-free steel10.1016/j.ijplas.2016.10.004 ↗
22. Crumbach · 2001
23. A model of grain fragmentation based on lattice curvature10.1016/j.actamat.2009.11.020 ↗
24. Modeling of intragranular misorientation and grain fragmentation in polycrystalline materials using the viscoplastic self-consistent formulation10.1016/j.ijplas.2018.06.004 ↗
25. Average intragranular misorientation trends in polycrystalline materials predicted by a viscoplastic self-consistent approach10.1016/j.actamat.2015.10.035 ↗
26. Predicting intragranular misorientation distributions in polycrystalline metals using the viscoplastic self-consistent formulation10.1016/j.actamat.2017.08.056 ↗
27. Tomé · 2012
28. The determination of the elastic field of an ellipsoidal inclusion, and related problems
29. Liu · 2003
30. Homogenization estimates for the average behavior and field fluctuations in cubic and hexagonal viscoplastic polycrystals10.1016/j.jmps.2003.08.006 ↗
31. Self-consistent modelling of the mechanical behaviour of viscoplastic polycrystals incorporating intragranular field fluctuations10.1080/14786430701432619 ↗
32. The rules for the lattice rotation accompanying slip as derived from a self-consistent model10.1155/TSM.31.217 ↗
33. Modeling of rolling texture development in a ferritic chromium steel10.1007/s11661-997-0191-6 ↗
34. Texture development in the cold rolling of IF steel10.1016/j.msea.2004.04.007 ↗
35. Influence of grain shape on the planar anisotropy of rolled steel sheets - evaluation of three models10.1016/j.commatsci.2008.06.013 ↗
36. Humphreys · 2017
37. Simulation of the orientation dependence of stored energy during rolling deformation of low carbon steels10.1088/0965-0393/7/5/316 ↗
38. Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: theory, experiments, applications10.1016/j.actamat.2009.10.058 ↗
39. Effect of strain rate on the forming behaviour of sheet metals10.1016/j.jmatprotec.2011.03.018 ↗
40. Recrystallization of stabilized ferritic stainless steel sheet10.1007/s11661-005-0091-6 ↗
41. O. Engler, V. Randle, Introduction to Texture Analysis: Macrotexture, Microtexture, and Orientation Mapping, 2nd Ed., 2009,10.1201/9781420063660 ↗
42. Statistically representative three-dimensional microstructures based on orthogonal observation sections10.1007/s11661-004-0146-0 ↗
43. Deformation processing10.1007/BF02644569 ↗
44. A study of through-thickness texture gradients in rolled sheets10.1007/s11661-000-0146-7 ↗
45. Deformation geometry and through-thickness strain gradients in asymmetric rolling10.1007/s11661-008-9582-6 ↗
46. A comparison of textures measured using x-ray and electron backscatter diffraction10.1007/s11661-007-9226-2 ↗
47. MTEX, MTEX, http://mtex toolbox.github.io/
48. Cold rolling and annealing textures in low carbon and extra low carbon steels10.1179/imr.1994.39.4.129 ↗
49. Textures of ferritic stainless steels10.1179/mst.1993.9.4.302 ↗
50. Lefebvre · 2014
51. Coupling recrystallization and texture to the mechanical properties of ferritic stainless steel sheet10.4028/www.scientific.net/MSF.467-470.317 ↗
52. Effect of texture components on the Lankford parameters in ferritic stainless steel sheets10.2355/isijinternational.52.522 ↗
53. Finite element modeling of crystal plasticity with grains shaped as truncated octahedrons10.1016/j.ijplas.2006.01.008 ↗
54. Effect of intermediate annealing on texture, formability and ridging of 17%cr ferritic stainless steel sheet10.1016/S0921-5093(00)01995-X ↗
55. Retrieving orientation correlations in deformation structures from orientation maps10.1179/174328405X71657 ↗
56. Orientation inhomogeneities within individual grains in cold-rolled aluminium resolved by electron backscatter diffraction10.1016/j.msea.2006.08.139 ↗
57. Subdivision of original grains during cold-rolling of interstitial-free steel10.1016/j.scriptamat.2003.12.005 ↗
58. U.F. Kocks · 2000
59. Quantitative characterization of the orientation spread within individual grains in copper after tensile deformation10.3139/146.110032 ↗
60. Recrystallisation textures in iron resulting from nucleation at grain boundaries10.1016/0001-6160(89)90101-6 ↗
61. Transition bands and recrystallization in metals
62. The mechanisms of recrystallization in cubic metals with particular reference to their orientation-dependence10.1179/msc.1974.8.1.73 ↗