Impact of carbon segregation on transition carbides and cementite precipitation during tempering of low carbon steels: Experiments and modeling

Tempering of low-carbon steels (less than about 0.3 wt.% C) may differ from the traditional precipitation sequence, which includes transition carbide precipitation, retained austenite decomposition and cementite precipitation. The main difference is the partial or total absence of transition carbides. In the present work, the effect of the carbon segregation on the mitigation of the precipitation of the latter is analyzed by combining multi-scale experimental investigations with a new precipitation model accounting for the carbon heterogeneities induced by the segregation. The full precipitation sequence is considered in order to study the impact of the segregation not only on the transition carbides, but also on the cementite which forms afterwards. The experimental work includes APT characterization of carbon segregation, in-situ HEXRD experiments to reveal precipitation kinetics, and TEM observations for carbide size measurements.The here-in developed precipitation mean-field and physics-based model combines two previous ones dedicated to the nucleation and growth of transition carbides and cementite and to the segregation of carbon at dislocations. It is shown that, even after water-quench, carbon atoms are already segregated on dislocations. The mitigation of transition carbide precipitation is caused by the presence of such segregations, which decrease the driving force for the transition carbide nucleation and enhance cementite precipitation. In agreement with previous experiments, the model also demonstrates that inside a martensitic microstructure, the precipitation sequence is different between the first (formed close to Ms temperature) and the last martensite (formed at room temperature) formed upon cooling, because of the difference in dislocation density, which influences the intensity of the segregation phenomenon.