Austenite formation kinetics from multicomponent cementite-ferrite aggregates
Source abstract
Abstract
Abstract Metastable austenite strongly influences the mechanical properties of many advanced high strength steels (AHSS) and its formation kinetics during intercritical annealing strongly depend on the initial microstructure. In this contribution, we have performed detailed kinetic studies of austenite formation from cementite-ferrite aggregate in a range of Fe-C-Mn and Fe-C-Mn-Si/Al alloys via in situ neutron powder diffraction. Depending on the relative contribution of cementite dissolution in respect to migrating interface of austenite/ferrite, the incomplete dissolution of enveloped cementite limited by slow diffusion in austenite could result in austenite plateauing below equilibrium, while fast dissolution of matrix cementite could result in austenite plateau above equilibrium. Both contributions need to be considered and modelled to describe the austenite formation kinetics.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (70)
Show source-provided references
1. Third Generation of AHSS: microstructure design concepts
2. Metastability alloy design10.1557/mrs.2019.72 ↗
3. Austenite stabilization through manganese enrichment10.1016/j.scriptamat.2010.09.040 ↗
4. The growth of austenite as related to prior structure
5. Formation of austenite from ferrite and ferrite-carbide aggregates
6. Effects of morphology on the mechanical behavior of a dual phase Fe/2Si/0.1C steel10.1007/BF02648546 ↗
7. Formation of austenite in 1.5 pct Mn steels10.1007/BF02648551 ↗
8. Influence of alloying elements upon the morphology of austenite formed from martensite in Fe-C-X alloys10.1007/BF02643888 ↗
9. On the formation of austenite grains from prior martensitic structure10.2355/tetsutohagane1955.61.1_96 ↗
10. Growth mode of austenite during reversion from martensite in Fe-2Mn-1.5Si-0.3C alloy: a transition in kinetics and morphology10.1016/j.actamat.2018.05.035 ↗
11. Predicting the austenite fraction after intercritical annealing in lean steels as a function of the initial microstructure10.1007/s11661-014-2186-4 ↗
12. Kinetics of austenite formation from a spheroidized ferrite-carbide aggregate
13. Austenite stability and deformation behavior in a cold-rolled transformation-induced plasticity steel with medium manganese content10.1016/j.actamat.2014.10.052 ↗
14. The effect of morphology on the stability of retained austenite in a quenched and partitioned steel10.1016/j.scriptamat.2012.11.003 ↗
15. On the influence of interactions between phases on the mechanical stability of retained austenite in transformation-induced plasticity multiphase steels10.1007/s11661-001-1027-4 ↗
16. Arlazarov · 2015
17. Wu · 2019
18. Carbide dissolution and austenite growth in the intercritical annealing of Fe–C–Mn dual phase steels10.1179/cmq.1984.23.1.121 ↗
19. Multiphase microstructures via confined precipitation and dissolution of vessel phases: example of austenite in martensitic steel10.1016/j.actamat.2014.11.025 ↗
20. Advanced high strength steel (AHSS) development through chemical patterning of austenite10.1016/j.scriptamat.2017.11.007 ↗
21. Partition and non-partition transition of austenite growth from a ferrite and cementite mixture in hypo- and hypereutectoid Fe-C-Mn alloys10.1016/j.calphad.2018.03.002 ↗
22. Effect of alloying elements on the formation of austenite and dissolution of cementite
23. Formation of austenite during intercritical annealing of dual-phase steels10.1007/BF02643686 ↗
24. Computer simulations of the austenite/ferrite diffusional transformations in low alloyed steels10.1016/0001-6160(82)90082-7 ↗
25. Growth of austenite in the intercritical annealing of Fe-C-Mn dual phase steels10.1179/cmq.1981.20.3.339 ↗
26. Growth of austenite from as-quenched martensite during intercritical annealing in an Fe–0.1C–3Mn–1.5Si alloy10.1016/j.actamat.2012.10.019 ↗
27. Mechanism of austenite formation from spheroidized microstructure in an intermediate Fe-0.1C-3.5Mn steel10.1007/s11661-016-3547-y ↗
28. A criterion for the change from fast to slow regime of cementite dissolution in Fe–C–Mn steels10.1016/S1005-0302(12)60122-4 ↗
29. Effects of Mn, Si and Cr addition on reverse transformation at 1073K from spheroidized cementite structure in Fe–0.6 mass% C alloy10.1016/j.actamat.2010.04.045 ↗
30. Effects of alloying elements on the kinetics of austenitization from pearlite in Fe–C–M alloys10.1080/14786435.2012.744484 ↗
31. Modeling the growth of austenite in association with cementite during continuous heating in low-carbon martensite10.1007/s10853-018-2020-2 ↗
32. Simulation of austenite formation during continuous heating from low carbon martensite with poly-dispersed cementite10.1007/s11661-019-05569-3 ↗
33. Experimental and numerical analysis on formation of stable austenite during the intercritical annealing of 5Mn steel10.1016/j.actamat.2011.03.025 ↗
34. Austenite growth and stability in medium Mn, medium Al Fe-C-Mn-Al steels10.1016/j.commatsci.2016.08.041 ↗
35. Simulation of the growth of austenite from as-quenched martensite in medium Mn steels10.1007/s11661-018-4497-3 ↗
36. Effect of alloying element partition in pearlite on the growth of austenite in high-carbon low alloy steel10.1007/s11661-015-3272-y ↗
37. Strategies for third-generation advanced high-strength steel development
38. On measurement of retained austenite in multiphase TRIP steels — results of blind round robin test involving six different techniques10.1179/174328408X353723 ↗
39. Direct carbon replicas from metal surfaces10.1088/0508-3443/7/6/304 ↗
40. The quantitative analysis of thin specimens10.1111/j.1365-2818.1975.tb03895.x ↗
41. Cementite coarsening during the tempering of Fe-C-Mn martensite10.1016/j.actamat.2018.08.023 ↗
42. The effect of alloying elements on cementite coarsening during martensite tempering10.1016/j.actamat.2019.11.040 ↗
43. Effect of partitioning of Mn and Si on the growth kinetics of cementite in tempered Fe-0.6 mass% C martensite10.1016/j.actamat.2007.05.023 ↗
44. Wombat: the high-intensity powder diffractometer at the OPAL reactor10.1016/j.physb.2006.05.323 ↗
45. Real-time structural analysis of quenching and partitioning (Q&P) in an experimental martensitic steel10.1016/j.jallcom.2013.01.205 ↗
46. The lattice parameters of austenite and ferrite in Fe-C alloys as functions of carbon concentration and temperature10.1016/0956-716X(93)90169-S ↗
47. Sample-displacement correction for whole-pattern profile fitting of powder diffraction data collected in capillary geometry10.1107/S0021889810047461 ↗
48. Application of symmetrized harmonics expansion to correction of the preferred orientation effect10.1107/S0021889893001219 ↗
49. Bunge · 2016
50. Debye–Waller factors and absorptive scattering factors of elemental crystals10.1107/S010876739600089X ↗
51. Triple lines in nucleation10.1016/j.scriptamat.2010.01.051 ↗
52. Rietveld refinement: practical powder diffraction pattern analysis using TOPAS
53. The effect of the initial microstructure on recrystallization and austenite formation in a DP600 steel10.1007/s11661-013-1721-z ↗
54. Real-time investigation of recovery, recrystallization and austenite transformation during annealing of a cold-rolled steel using high energy X-ray diffraction (HEXRD)
55. Vegard's law10.1103/PhysRevA.43.3161 ↗
56. A quantitative study of the formation of austenite and the solution of cementite at different austenitizing temperatures for a 1.27% carbon steel10.1016/0001-6160(56)90157-2 ↗
57. Models for numerical treatment of multicomponent diffusion in simple phases10.1063/1.351745 ↗
58. Thermo-Calc & DICTRA, computational tools for materials science10.1016/S0364-5916(02)00037-8 ↗
59. Diffusivity and Mobility Data
60. Characteristics of the γ → α transformation in Fe-Mn alloys10.1016/S0921-5093(01)01459-9 ↗
61. Effect of alloying additions on the lattice parameter of austenite
62. Austenite stability of ultrafine-grained transformation-induced plasticity steel with Mn partitioning10.1016/j.scriptamat.2011.04.010 ↗
63. Ferrite recrystallization and austenite formation in cold-rolled intercritically annealed steel10.1007/BF02658671 ↗
64. The formation of austenite at low intercritical annealing temperatures in a normalized 0.08C-1.45Mn-0.21Si steel10.1007/BF02658685 ↗
65. Phase field modelling of austenite formation from ultrafine ferrite-carbide aggregates in Fe-C10.3139/146.110307 ↗
66. Effects of hot band annealing on the mechanical properties of cold-rolled and intercritically annealed medium manganese steels10.1007/s11661-019-05363-1 ↗
67. Effect of pre-existed austenite on austenite reversion and mechanical behavior of an Fe-0.2C-8Mn-2Al medium Mn steel10.1016/j.actamat.2018.01.009 ↗
68. The role of dispersions in modeling the kinetics of phase transformations10.4028/www.scientific.net/SSP.172-174.279 ↗
69. Influence of Mn content on the microstructure and mechanical properties of ultrafine grained C-Mn steels10.2355/isijinternational.45.1721 ↗
70. Effect of Mn and C on grain growth in Mn steels10.1007/s11661-018-5032-2 ↗