Accelerating precipitation hardening by natural aging in a 6082 Al-Mg-Si alloy
Source abstract
Abstract
It is well known that long time natural aging (NA) after quenching from solution treatment will significantly reduce the precipitation hardening kinetics and peak hardness of most 6xxx aluminum alloys during later artificial aging (AA). Here we demonstrate an effective strategy to accelerate precipitation hardening, taking advantage of NA. It is found that by a short time pre-aging (PA) at AA temperature, NA for up to 1 year can reduce the time to peak strength in a 6082 alloy during later AA. A simultaneous increase in yield strength and uniform elongation at peak-aged condition can be achieved as a result of finer and denser age-hardening precipitates than those formed by direct AA treatment. Quantitative characterization of the precipitate microstructure by annular dark field scanning transmission electron microscopy (ADF-STEM) and atom probe tomography (APT) reveals that PA generates a small fraction of fine β″ needle precipitates composed of 6–9 β″-eyes and a substantially high density of GP-zones composed of 3–5 β″-eyes, which are stable at room temperature and can grow easily into β″ upon AA. During NA after PA, more GP-zones with at least 2 β″-eyes form while the larger GP-zones inherited from PA grow further, both of which can act as the precursors of β″ precipitates during later AA.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Structure Determination of Mg5Si6 Particles in Al by Dynamic Electron Diffraction Studies10.1126/science.277.5330.1221 ↗
2. The crystal structure of the β'' phase in Al-Mg-Si alloys10.1016/S1359-6454(97)00493-X ↗
3. Pre-precipitate clusters and precipitation processes in Al-Mg-Si alloys10.1016/S1359-6454(99)00033-6 ↗
4. Atomic model for GP-zones in a 6082 Al-Mg-Si system10.1016/S1359-6454(00)00302-5 ↗
5. Atomic Structures of Precipitates in Al-Mg-Si Alloys with Small Additions of Other Elements10.1002/adem.201800125 ↗
6. The precipitation sequence in Al-Mg-Si alloys10.1016/S1359-6454(98)00059-7 ↗
7. Phase stability and structural features of matrix-embedded hardening precipitates in Al-Mg-Si alloys in the early stages of evolution10.1016/j.actamat.2006.11.019 ↗
8. Precipitates in aluminium alloys
9. Atomic-resolution chemical mapping of ordered precipitates in Al alloys using energy-dispersive X-ray spectroscopy10.1016/j.micron.2017.02.007 ↗
10. Detailed atomistic insight into the β" phase in Al-Mg-Si alloys10.1016/j.actamat.2014.01.052 ↗
11. Modeling peak-aged precipitate strengthening in Al–Mg–Si alloys
12. Precipitation strengthening of the aluminum alloy AA611110.1007/s11661-003-0191-0 ↗
13. Strength contributions from precipitates10.1080/09500839.2015.1125029 ↗
14. High-resolution electron microscopy on the structure of Guinier-Preston zones in an Al-1.6 mass Pct Mg2Si alloy10.1007/s11661-998-0242-7 ↗
15. Precipitate formation in aluminium alloys: multi-scale modelling approach10.1016/j.actamat.2020.05.050 ↗
16. The influence of temperature and storage time at RT on nucleation of the β'' phase in a 6082 Al-Mg-Si alloy10.1016/S1359-6454(02)00470-6 ↗
17. The Effect of Intermediate Storage Temperature and Time on the Age Hardening Response of Al-Mg-Si Alloys10.4028/www.scientific.net/MSF.519-521.239 ↗
18. Clustering in Age-hardenable aluminum alloys10.1002/adem.201800255 ↗
19. Analysis of strengthening in AA6111 during the early stages of aging: atom probe tomography and yield stress modelling10.1016/j.actamat.2013.08.033 ↗
20. Clustering behaviour in an Al-Mg-Si-Cu alloy during natural ageing and subsequent under-ageing10.1016/j.msea.2012.08.093 ↗
21. Three-dimensional atom probe characterization of nanoclusters responsible for multistep aging behavior of an Al-Mg-Si alloy10.1007/s11661-007-9438-5 ↗
22. Formation and reversion of clusters during natural aging and subsequent artificial aging in an Al-Mg-Si alloy10.1016/j.msea.2015.02.035 ↗
23. Study of precipitation in Al-Mg-Si alloys by Atom Probe Tomography I. Microstructural changes as a function of ageing temperature10.1016/j.actamat.2015.08.017 ↗
24. The influence of composition and natural aging on clustering during preaging in Al–Mg–Si alloys10.1063/1.3481090 ↗
25. Metrology of small particles and solute clusters by atom probe tomography10.1016/j.actamat.2020.02.023 ↗
26. Evaluation of solute clusters associated with bake-hardening response in isothermal aged Al-Mg-Si alloys using a three-dimensional atom probe10.1007/s11661-014-2548-y ↗
27. Effects of natural aging after pre-aging on clustering and bake-hardening behavior in an Al-Mg-Si alloy10.1016/j.scriptamat.2016.01.019 ↗
28. Atomic structure of clusters and GP-zones in an Al-Mg-Si alloy10.1016/j.actamat.2024.119811 ↗
29. The effects of preaging treatments on aging kinetics and mechanical properties in AA6111 aluminum autobody sheet10.1007/s11661-999-0010-3 ↗
30. The basic processes affecting two-step ageing in an Al-Mg-Si alloy10.1080/14786436708229257 ↗
31. The effect of pre-aging on microstructure and tensile properties of Al-Mg-Si alloys10.1016/S1359-6462(96)00487-3 ↗
32. Effect of Pre-aging temperature on the behavior in the early stage of aging at high temperature for Al-Mg-Si alloy10.4028/www.scientific.net/MSF.217-222.821 ↗
33. Effect of pre-ageing and natural ageing on the paint bake response of alloy AA6181A10.1016/j.msea.2013.01.065 ↗
34. Design of solute clustering during thermomechanical processing of AA6016 Al–Mg–Si alloy10.1016/j.actamat.2020.10.074 ↗
35. Good combination of strength and mechanical isotropy in AA6082 alloy processed by high temperature intermediate annealing10.1016/j.jallcom.2022.166229 ↗
36. Quantification of the Mg2Si β″ and β′ phases in AlMgSi alloys by transmission electron microscopy10.1007/BF02670664 ↗
37. Miller · 2014
38. Preferential evaporation in atom probe tomography: an analytical approach10.1017/S1431927620001749 ↗
39. Estimation of the Reconstruction Parameters for Atom Probe Tomography10.1017/S1431927608080690 ↗
40. Atom probe tomography: put theory into practice
41. Analysis of Radiation Damage in Light Water Reactors: comparison of Cluster Analysis Methods for the Analysis of Atom Probe Data10.1017/S1431927616012678 ↗
42. Best-fit ellipsoids of atom-probe tomographic data to study coalescence of γ′ (L12) precipitates in Ni–Al–Cr10.1016/j.scriptamat.2007.04.020 ↗
43. Detector geometry, thermal diffuse scattering and strain effects in ADF STEM imaging10.1016/0304-3991(94)00173-K ↗
44. Atomistic details of precipitates in lean Al-Mg-Si alloys with trace additions of Ag and Ge studied by HAADF-STEM and DFT10.1080/14786435.2017.1281461 ↗
45. The microstructural origin of a hardness double-peak in an age-hardened EN-AW 608210.1016/j.actamat.2023.119095 ↗
46. The shearable–non-shearable transition in Al–Mg–Si–Cu precipitation hardening alloys: implications on the distribution of slip, work hardening and fracture10.1080/14786430500154935 ↗
47. An improved modelling framework for strength and work hardening of precipitate strengthened Al–Mg–Si alloys10.1016/j.msea.2021.142500 ↗
48. The effect of shearable clusters and precipitates on dynamic recovery of Al alloys10.1016/j.actamat.2023.119643 ↗