Slip localization behavior at triple junctions in nickel-base superalloys
Source abstract
Abstract
Incipient slip localization in the vicinity of hundreds of grain boundary triple junctions (TJs) in a lightly deformed nickel-base superalloy IN718 is studied using a combination of three-dimensional (3D) crystal plasticity finite element (CPFE) modeling, high resolution digital image correlation (HR-DIC) and 3D electron back-scatter diffraction tomography (3D EBSD). A 3D reconstruction method enables identification of thousands of TJs and correspondence of any observed slip bands with their originating TJ lines below the specimen surface. We present a large-scale CPFE model of the experimental 3D microstructure composed of high-fidelity representation of the TJ lines and the boundaries and interiors of the parent grains and use it to calculate the local micromechanical response and slip activity of all TJs at the onset of macroscopic yielding. Statistical analysis of the calculated quantities reveal TJs develop larger stress concentration and grain-average re-orientation than grain interiors and grain boundaries, however no substantial differences in cumulative slip were found among these microstructural regions. We find that TJs with observed slip bands generate lower grain-average re-orientation, fewer active slip systems, and more localized slip on a single system than those without. The distinctions in the reorientation and slip activity are stronger in TJs that experience more intense slip.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and mechanical properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Nickel-based superalloys
2. Microstructural statistics for fatigue crack initiation in polycrystalline nickel-base superalloys10.1007/s10704-017-0241-z ↗
3. Insight into microstructure-sensitive elastic strain concentrations from integrated computational modeling and digital image correlation10.1016/j.scriptamat.2020.10.001 ↗
4. Fatigue deformation in a polycrystalline nickel base superalloy at intermediate and high temperature: Competing failure modes10.1016/j.actamat.2018.03.035 ↗
5. A combined grain scale elastic–plastic criterion for identification of fatigue crack initiation sites in a twin containing polycrystalline nickel-base superalloy10.1016/j.actamat.2015.09.050 ↗
6. Direct measurements of slip irreversibility in a nickel-based superalloy using high resolution digital image correlation10.1016/j.actamat.2019.12.009 ↗
7. Automated and quantitative analysis of plastic strain localization via multi-modal data recombination10.1016/j.matchar.2020.110245 ↗
8. On the origins of fatigue strength in crystalline metallic materials10.1126/science.abn0392 ↗
9. Characterisation of strain localisation processes during fatigue crack initiation and early crack propagation by SEM-DIC in an advanced disc alloy10.1016/j.msea.2017.05.091 ↗
10. Slip localization in Inconel 718: A three-dimensional and statistical perspective10.1016/j.actamat.2021.117037 ↗
11. Measurement of elastic and rotation fields during irreversible deformation using heaviside-digital image correlation10.1016/j.matchar.2020.110600 ↗
12. Self-assembled nanoparticle surface patterning for improved digital image correlation in a scanning electron microscope10.1007/s11340-013-9734-5 ↗
13. Sub-grain scale digital image correlation by electron microscopy for polycrystalline materials during elastic and plastic deformation
14. Custom scan control and time resolved signal acquisition for high resolution SEM imaging10.1017/S1431927618003173 ↗
15. Development of grain-scale slip activity and lattice rotation fields in Inconel 71810.1016/j.actamat.2022.117627 ↗
16. Measurements of plastic localization by heaviside-digital image correlation10.1016/j.actamat.2018.07.013 ↗
17. The TriBeam system: Femtosecond laser ablation in situ SEM10.1016/j.matchar.2014.10.023 ↗
18. DREAM.3D: A digital representation environment for the analysis of microstructure in 3D10.1186/2193-9772-3-5 ↗
19. Accurate reconstruction of EBSD datasets by a multimodal data approach using an evolutionary algorithm10.1016/j.matchar.2019.01.033 ↗
20. Dryad Data Repository. URL https://datadryad.org/.
21. Multi-modal dataset of a polycrystalline metallic material: 3D microstructure and deformation fields10.1038/s41597-022-01525-w ↗
22. Crystallographic texture evolution in bulk deformation processing of FCC metals10.1016/0022-5096(92)80003-9 ↗
23. Material rate dependence and localized deformation in crystalline solids10.1016/0001-6160(83)90014-7 ↗
24. Latent hardening in copper and aluminium single crystals10.1016/0001-6160(80)90162-5 ↗
25. Kinetics of flow and strain-hardening10.1016/0001-6160(81)90112-7 ↗
26. A crystal-plasticity FEM study on effects of simplified grain representation and mesh types on mesoscopic plasticity heterogeneities10.1016/j.msea.2012.05.089 ↗
27. Owen · 2019
28. Blacker · 2016
29. Morawiec · 2003
30. Texture analysis with MTEX–free and open source software toolbox10.4028/www.scientific.net/SSP.160.63 ↗
31. The formation of intragranular stress concentration in plastic deformed Ni-base superalloy: Governing factors and process10.1016/j.msea.2021.140820 ↗
32. In-situ SEM study of temperature-dependent tensile behavior of Inconel 718 superalloy10.1007/s10853-021-06256-8 ↗
33. Triple line energy determination by scanning tunneling microscopy10.1016/0956-716X(91)90376-C ↗
34. Grain boundary and triple junction energies in crystalline media: A disclination based approach10.1016/j.ijsolstr.2011.07.009 ↗
35. The triple junction
36. Deformation accommodation at triple junctions in columnar-grained nickel10.1007/s11661-018-4998-0 ↗
37. Effects of grain boundary- and triple junction-character on intergranular fatigue crack nucleation in polycrystalline aluminum10.1007/s10853-007-2236-z ↗
38. Modeling slip, kink and shear banding in classical and generalized single crystal plasticity10.1016/S1359-6454(98)00012-3 ↗
39. Strain localization and failure in irradiated zircaloy with crystal plasticity10.1016/j.ijplas.2015.05.008 ↗
40. A size-dependent tensorial plasticity model for FCC single crystal with irradiation10.1016/j.ijplas.2014.09.004 ↗
41. Intragranular localization induced by softening crystal plasticity: Analysis of slip and kink bands localization modes from high resolution FFT-simulations results10.1016/j.actamat.2019.06.010 ↗
42. Effect of neighboring grain orientation on strain localization in slip bands in HCP materials10.1016/j.ijplas.2021.103026 ↗
43. On a test of whether one of two random variables is stochastically larger than the other10.1214/aoms/1177730491 ↗
44. Mann-whitney u test
45. The probable error of a mean10.2307/2331554 ↗
46. Dominance statistics: Ordinal analyses to answer ordinal questions10.1037/0033-2909.114.3.494 ↗
47. J. Romano, J. Kromrey, J. Coraggio, J. Skowronek, Appropriate statistics for ordinal level data: Should we really be using t-test and Cohen’s d for evaluating group differences on the NSSE and other surveys?, in: Annual Meeting of the Florida Association of Institutional Research, 2006, pp. 1–3.