Interfacial characterization and its influence on the corrosion behavior of Mg-SiO2 nanocomposites
Source abstract
Abstract
In this work, the corrosion behavior of Mg-SiO 2 nanocomposites, fabricated by powder metallurgy coupled with hybrid microwave sintering and subsequent hot extrusion, was investigated using electrochemical, hydrogen evolution and weight loss measurements. Localized intergranular corrosion behavior was analyzed based on microstructural characteristics, which were characterized by scanning electron microscopy, energy-dispersive x-ray spectroscopy, and high-resolution transmission electron microscopy (HRTEM). In particular, copious numbers of Mg/MgO misfit dislocations were identified at the interface between the matrix Mg and SiO 2 nanoparticles; indeed, first principles calculations revealed that the MgO/Mg interfaces were relatively weakly bonded as compared to the close-packed interfacial Mg(0001)//MgO(111) structure. Using geometrical phase analysis of the HRTEM images to determine the lattice strains in the Mg/MgO interfacial area, we conclude that the highly strained and weakly bonded Mg/MgO interfaces act to promote significant localized dissolution and thus play a dominant role in intensifying intergranular corrosion in these nanocomposites.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (77)
Show source-provided references
1. Magnesium matrix composites for biomedical applications: a review10.1016/j.jma.2018.11.001 ↗
2. A flash of magnesium10.1038/nchem.459 ↗
3. Weight loss with magnesium alloys10.1126/science.1182848 ↗
4. Strength retention, corrosion control and biocompatibility of Mg–Zn–Si/HA nanocomposites10.1016/j.jmbbm.2019.103584 ↗
5. Gupta · 2011
6. Emerging environment friendly, magnesium-based composite technology for present and future generations10.1007/s11837-016-1823-3 ↗
7. Increasing significantly the failure strain and work of fracture of solidification processed AZ31B using nano-Al2O3 particulates10.1016/j.jallcom.2007.05.038 ↗
8. Development of novel carbon nanotube reinforced magnesium nanocomposites using the powder metallurgy technique10.1088/0957-4484/17/1/002 ↗
9. Highly deformable Mg–Al–Ca alloy with Al2Ca precipitates10.1016/j.actamat.2020.09.006 ↗
10. Angelo · 2008
11. Influence of texture and grain size on work hardening and ductility in magnesium-based alloys processed by ECAP and rolling10.1016/j.actamat.2006.05.018 ↗
12. Properties and deformation behaviour of Mg–Y2O3 nanocomposites10.1016/j.actamat.2007.05.032 ↗
13. Improving mechanical properties of magnesium using nano-yttria reinforcement and microwave assisted powder metallurgy method10.1016/j.compscitech.2007.03.006 ↗
14. Enhancing strength and ductility of magnesium by integrating it with aluminum nanoparticles10.1016/j.actamat.2007.07.039 ↗
15. Enhancing the hardness/compression/damping response of magnesium by reinforcing with biocompatible silica nanoparticulates10.3139/146.111435 ↗
16. An atom probe study on Nb solute partitioning and nanocrystalline grain stabilization in mechanically alloyed Cu-Nb10.1016/j.actamat.2016.12.057 ↗
17. Oxygen-mediated deformation and grain refinement in Cu-Fe nanocrystalline alloys10.1016/j.actamat.2018.12.040 ↗
18. Interplay between thermodynamic and kinetic stabilization mechanisms in nanocrystalline Fe-Mg alloys10.1016/j.actamat.2017.11.014 ↗
19. Corrosion behavior of SiC reinforced magnesium composites10.1016/j.corsci.2006.05.047 ↗
20. Effect of carbon nanotubes on corrosion of Mg–CNT composites10.1016/j.corsci.2010.02.025 ↗
21. Corrosion behaviour of Mg–Cu and Mg–Mo composites in 3.5% NaCl10.1016/j.corsci.2008.06.043 ↗
22. Corrosion of metal matrix composites
23. Strain-induced preferential dissolution at the dislocation emergences in MnS: an atomic scale study10.1080/14786435.2015.1052030 ↗
24. Evaluation of pitting corrosion in duplex stainless steel Fe20Cr9Ni for nuclear power application10.1016/j.actamat.2020.07.046 ↗
25. Silica particles: a novel drug-delivery system10.1002/adma.200400771 ↗
26. Magnesium-based nanocomposites: Lightweight materials of the future10.1016/j.matchar.2015.04.015 ↗
27. Quantitative measurement of displacement and strain fields from HREM micrographs10.1016/S0304-3991(98)00035-7 ↗
28. Measurement of the displacement field of dislocations to 0.03 Å by electron microscopy10.1038/nature01638 ↗
29. Towards full-resolution inline electron holography10.1016/j.micron.2013.10.009 ↗
30. In-plane and out-of-plane deformation at the sub-grain scale in polycrystalline materials assessed by confocal microscopy10.1016/j.actamat.2019.03.001 ↗
31. First principles methods using CASTEP10.1524/zkri.220.5.567.65075 ↗
32. First-principles simulation: ideas, illustrations and the CASTEP code10.1088/0953-8984/14/11/301 ↗
33. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
34. Special points for Brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
35. Measurement of the corrosion rate of magnesium alloys using Tafel extrapolation10.1016/j.corsci.2009.10.016 ↗
36. Review of Mg alloy corrosion rates10.1016/j.jma.2020.08.002 ↗
37. Assessing the corrosion of biodegradable magnesium implants: a critical review of current methodologies and their limitations10.1016/j.actbio.2011.11.014 ↗
38. Advances in Mg corrosion and research suggestions10.1016/j.jma.2013.09.003 ↗
39. Corrosion of ultra-high-purity Mg in 3.5% NaCl solution saturated with Mg(OH)210.1016/j.corsci.2013.05.018 ↗
40. Corrosion behaviour in salt spray and in 3.5% NaCl solution saturated with Mg(OH)2 of as-cast and solution heat-treated binary Mg–X alloys: X=Mn, Sn, Ca, Zn, Al, Zr, Si, Sr10.1016/j.corsci.2013.06.030 ↗
41. An innovative specimen configuration for the study of Mg corrosion10.1016/j.corsci.2010.09.016 ↗
42. Influence of microstructure on corrosion of As-cast ZE4110.1002/adem.200700246 ↗
43. Influence of microstructure on the corrosion of diecast AZ91D10.1016/S0010-938X(98)00121-8 ↗
44. Calculated phase diagrams and the corrosion of die-cast Mg–Al alloys10.1016/j.corsci.2008.12.015 ↗
45. Characteristics of Aluminum and Magnesium Based Nanocomposites Processed Using Hybrid Microwave Sintering
46. Microstructural effects on thermoelectric efficiency: a case study on magnesium silicide10.1016/j.actamat.2014.05.041 ↗
47. Wear properties of magnesium matrix composites reinforced with SiO2 particles10.1108/00368791011051099 ↗
48. Experimental observation of periodic structure formation in SiO2–Mg system10.1016/S1359-6462(01)01043-0 ↗
49. Kinetics and mechanism of periodic structure formation at SiO2/Mg interface10.1016/j.actamat.2006.05.048 ↗
50. Strain–structure relations in human teeth using Moiré fringes10.1016/S0021-9290(97)00131-0 ↗
51. Strain measurements from Nd2Fe14B grains in sintered magnets using artificial moiré fringes10.1016/j.actamat.2015.08.058 ↗
52. Williams · 2009
53. Hirsch · 1977 · 353
54. Wetting and adhesion at Mg/MgO interfaces10.1007/s10853-013-7397-3 ↗
55. Lattice distortion∕disordering and local amorphization in the dendrites of a Ti66.1Cu8Ni4.8Sn7.2Nb13.9 nanostructure–dendrite composite during intersection of shear bands10.1063/1.1929080 ↗
56. Novel Ti-base nanostructure-dendrite composite with enhanced plasticity10.1038/nmat792 ↗
57. An attempt to estimate the degree of precipitation hardening, with a simple model10.1088/0959-5309/52/1/312 ↗
58. Magnesium oxide (MgO) Young's, shear and bulk moduli, Poisson's ratio
59. https://www.azom.com/properties.aspx?ArticleID=618.
60. Crystal-orientation-dependent corrosion behaviour of single crystals of a pure Mg and Mg-Al and Mg-Cu solid solutions10.1016/j.corsci.2016.03.019 ↗
61. Atomic and electronic structure and interatomic potentials at a polar ceramic/metal interface: {222}MgO/Cu10.1103/PhysRevB.60.16094 ↗
62. The effect of misfit on heterophase interface energies10.1088/0953-8984/14/11/307 ↗
63. First-principles study of thermodynamical and mechanical stabilities of thin copper film on tantalum10.1103/PhysRevB.76.245434 ↗
64. First-principles study of Mg(0001)/MgO(1-11) interfaces10.1142/S0217984916501529 ↗
65. Crystallographic orientation and electrochemical activity of AZ31 Mg alloy10.1016/j.elecom.2010.05.011 ↗
66. Effect of microstructure evolution on corrosion of different crystal surfaces of AZ31 Mg alloy in a chloride containing solution10.1016/j.corsci.2011.09.005 ↗
67. Crystal orientation and electrochemical corrosion of polycrystalline Mg10.1016/j.corsci.2012.05.019 ↗
68. Correlating the five parameter grain boundary character distribution and the intergranular corrosion behaviour of a stainless steel using 3D orientation microscopy based on mechanical polishing serial sectioning10.1016/j.actamat.2018.06.044 ↗
69. Precipitation formation on ∑5 and ∑7 grain boundaries in 316L stainless steel and their roles on intergranular corrosion10.1016/j.actamat.2021.116822 ↗
70. Electrochemical properties of intermetallic phases and common impurity elements in magnesium alloys10.1149/1.3523229 ↗
71. The role of Si and Ca on new wrought Mg–Zn–Mn based alloy10.1016/j.msea.2006.10.059 ↗
72. Volta potential of second phase particles in extruded AZ80 magnesium alloy10.1016/j.electacta.2005.10.010 ↗
73. Gutman · 1998
74. Hirth · 1983
75. Corrosion behavior of equal-channel-angular-pressed pure magnesium in NaCl aqueous solution10.1016/j.corsci.2009.10.004 ↗
76. Effect of ECAP processing on corrosion resistance of AE21 and AE42 magnesium alloys10.1016/j.apsusc.2012.12.096 ↗
77. Corrosion of hot extrusion AZ91 magnesium alloy: I-relation between the microstructure and corrosion behavior10.1016/j.corsci.2011.02.015 ↗