journal article·2023-02

Tensile overload-induced texture effects on the fatigue resistance of a CoCrFeMnNi high-entropy alloy

Tu-Ngoc Lam, Hsu-Huan Chin, Xiaodan Zhang, Rui Feng, Huamiao Wang, Ching-Yu Chiang, Soo Yeol Lee, Takuro Kawasaki, Stefanus Harjo, Peter K. Liaw, An-Chou Yeh, Tsai-Fu Chung, E-Wen Huang

Acta Materialia· Volume 245
Publisher page

Abstract

The present study investigates the crystallographic-texture effects on the improved fatigue resistance in the CoCrFeMnNi high-entropy alloys (HEAs) with the full-size geometry of the American Society for Testing and Materials (ASTM) Standards E647-99. We exploited X-ray nano-diffraction (XND) mapping to characterize the crystal-deformation levels ahead of the crack tip after stress unloading under both constant- and tensile-overloaded-fatigue conditions. The crack-tip blunting-induced much higher deformation level was concentrated surrounding the crack-tip which delays the fatigue-crack growth immediately after a tensile overload. The predominant deformation texture orientation in the Paris regime was investigated, using electron backscatter diffraction (EBSD) and orientation distribution function (ODF) analyses. The twinning formation-driven shear deformation gave rise to the development of the Goss-type texture within the plastic deformation regime under a tensile-overloaded-fatigue condition, which was attributed to enhance the crack deflection and thus the tensile-induced crack-growth-retardation period in the CoCrFeMnNi HEA. Our new findings address the quantitative discrepancy found in our earlier work.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
2. Effect of temperature on the fatigue-crack growth behavior of the high-entropy alloy CrMnFeCoNi10.1016/j.intermet.2017.05.009 ↗
3. Texture effect on fatigue crack propagation in aluminium alloys: an overview10.1080/02670836.2019.1651954 ↗
4. Modelling of short crack propagation – transition from stage I to stage II10.1016/j.engfracmech.2007.02.018 ↗
5. Mechanisms for Goss-grains induced crack deflection and enhanced fatigue crack propagation resistance in fatigue stage II of an AA2524 alloy10.1016/j.msea.2014.12.021 ↗
6. The effects of overloads in fatigue crack growth10.1016/0142-1123(91)90479-I ↗
7. Evolution of residual-strain distribution through an overload-induced retardation period during fatigue-crack growth10.1063/1.3234388 ↗
8. Dynamic strain evolution around a crack tip under steady- and overloaded-fatigue conditions10.3390/met5042109 ↗
9. Neutron diffraction residual stress analysis during fatigue crack growth retardation of stainless steel10.1016/j.ijfatigue.2017.08.007 ↗
10. Enhancement of fatigue resistance by overload-induced deformation twinning in a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2020.10.016 ↗
11. Effects of tensile/compressive overloads on fatigue crack growth behavior of an extra-low-interstitial titanium alloy10.1016/j.ijmecsci.2016.09.014 ↗
12. Mechanisms of overload effect on fatigue crack propagation in aluminium alloys10.1016/0013-7944(78)90021-8 ↗
13. Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
14. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
15. Fracture toughness and fatigue crack growth behavior of as-cast high-entropy alloys10.1007/s11837-015-1563-9 ↗
16. Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi
17. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
18. Mechanical and magnetic properties of the high-entropy alloys for combinatorial approaches10.3390/cryst10030200 ↗
19. Machine-learning and high-throughput studies for high-entropy materials10.1016/j.mser.2021.100645 ↗
20. Grain-size-dependent microstructure effects on cyclic deformation mechanisms in CoCrFeMnNi high-entropy-alloys10.1016/j.scriptamat.2021.114459 ↗
21. Element effects of Mn and Ge on the tuning of mechanical properties of high-entropy alloys10.1007/s11661-020-05932-9 ↗
22. Element effects on high-entropy alloy vacancy and heterogeneous lattice distortion subjected to quasi-equilibrium heating10.1038/s41598-019-51297-4 ↗
23. Mechanical behavior of high-entropy alloys10.1016/j.pmatsci.2021.100777 ↗
24. Differences in texture evolution from low-entropy to high-entropy face-centered cubic alloys during tension test10.1016/j.intermet.2019.106635 ↗
25. Fatigue behavior of a wrought Al0.5CoCrCuFeNi two-phase high-entropy alloy10.1016/j.actamat.2015.07.004 ↗
26. Fatigue behavior of Al0.5CoCrCuFeNi high entropy alloys10.1016/j.actamat.2012.06.046 ↗
27. Effects of cryogenic temperature and grain size on fatigue-crack propagation in the medium-entropy CrCoNi alloy10.1016/j.actamat.2020.09.021 ↗
28. Temperature and load-ratio dependent fatigue-crack growth in the CrMnFeCoNi high-entropy alloy10.1016/j.jallcom.2019.04.234 ↗
29. Microstructure and texture evolution during annealing of equiatomic CoCrFeMnNi high-entropy alloy10.1016/j.jallcom.2013.10.237 ↗
30. Microstructure and texture development in CoCrNi medium entropy alloy processed by severe warm cross-rolling and annealing10.1016/j.intermet.2022.107463 ↗
31. Evolution of microstructure and texture during thermo-mechanical processing of a two phase Al0.5CoCrFeMnNi high entropy alloy10.1016/j.matchar.2016.06.021 ↗
32. 2000 · 591
33. Texture analysis with MTEX – free and open source software toolbox10.4028/www.scientific.net/SSP.160.63 ↗
34. Nanometer resolved real time visualization of acidification and material breakdown in confinement10.1002/admi.201802069 ↗
35. 2008
36. Strain localization in ductile single crystals10.1016/0022-5096(77)90001-1 ↗
37. Crystal plasticity10.1115/1.3167205 ↗
38. Micromechanics of crystals and polycrystals10.1016/S0065-2156(08)70242-4 ↗
39. Texture development and strain hardening in rate dependent polycrystals10.1016/0001-6160(85)90188-9 ↗
40. Generalized constitutive relations for incremental deformation of metal crystals by multislip10.1016/0022-5096(66)90040-8 ↗
41. A user-material subroutine incorporating single crystal plasticity in the ABAQUS finite element program
42. An analysis of nonuniform and localized deformation in ductile single crystals10.1016/0001-6160(82)90005-0 ↗
43. Material rate dependence and localized deformation in crystalline solids10.1016/0001-6160(83)90014-7 ↗
44. Inelastic constitutive relations for solids: an internal-variable theory and its application to metal plasticity10.1016/0022-5096(71)90010-X ↗
45. Modeling of twin formation, propagation and growth in a Mg single crystal based on crystal plasticity finite element method10.1016/j.ijplas.2016.08.002 ↗
46. A model for texture development dominated by deformation twinning: Application to zirconium alloys10.1016/0956-7151(91)90083-D ↗
47. Simulation of the rolling and shear texture of brass by the Taylor theory adapted for mechanical twinning10.1016/0001-6160(78)90111-6 ↗
48. A constitutive model of twinning and detwinning for hexagonal close packed polycrystals10.1016/j.msea.2012.06.038 ↗
49. A crystal plasticity model for hexagonal close packed (HCP) crystals including twinning and de-twinning mechanisms10.1016/j.ijplas.2013.02.016 ↗
50. Insights into the phase diagram of the CrMnFeCoNi high entropy alloy10.1016/j.actamat.2015.01.068 ↗
51. Liquid phase separation in Ag-Co-Cr-Fe-Mn-Ni, Co Cr-Cu-Fe-Mn-Ni and Co-Cr-Cu-Fe-Mn-Ni-B high entropy alloys for biomedical application10.3390/cryst10060527 ↗
52. Effect of Mn and V on structure and mechanical properties of high-entropy alloys based on CoCrFeNi system10.1016/j.jallcom.2013.12.210 ↗
53. Hutchings · 2005
54. Crystallographic orientation and spatially resolved damage for polycrystalline deformation of a high manganese steel10.1016/j.actamat.2022.117628 ↗
55. A statistical investigation of the effects of grain boundary properties on transgranular fracture10.1016/j.actamat.2008.05.036 ↗
56. Unraveling submicron-scale mechanical heterogeneity by three-dimensional X-ray microdiffraction10.1073/pnas.1711994115 ↗
57. Enhancing fatigue life by ductile-transformable multicomponent B2 precipitates in a high-entropy alloy
58. Phase transformations in high manganese twinning-induced plasticity (TWIP) steels
59. On the low-cycle fatigue response of CoCrNiFeMn high entropy alloy with ultra-fine grain structure10.1016/j.actamat.2020.116540 ↗
60. The brass-type texture and its deviation from the copper-type texture10.1016/j.pmatsci.2008.09.002 ↗
61. Goss Texture Formation by Asymmetric Rolling in Steel Sheet10.4028/www.scientific.net/MSF.917.236 ↗
62. Effect of initial Goss texture sharpness on texture evolution and magnetic properties of ultra-thin grain-oriented electrical steel10.1007/s40195-017-0610-7 ↗
63. The grain boundary geometry for optimum resistance to growth of short fatigue cracks in high strength Al-alloys10.1016/j.ijfatigue.2005.06.021 ↗
64. Enhanced fatigue crack propagation resistance of Al-Cu-Mg alloy by intensifying Goss texture and refining goss grains10.1016/j.msea.2016.10.003 ↗