Stabilizing defective coherent twin boundaries for strong and stable nanocrystalline nanotwinned Cu
Source abstract
Abstract
Manipulating coherent twin boundaries (CTBs) opens an avenue to design strong nanostructured materials. However, below a critical TB spacing, these inherently defective CTBs decorated with kink-like steps (abbreviated by kinks) and intersected with grain boundaries (GBs) will suffer from the thermal/mechanical instability, leading to the degradation of material properties. Here, utilizing Cr-segregation at kinks and GBs via a minor (1 at.%) Cr-doping, we report the nanocrystalline-nanotwinned (NNT) Cu-Cr alloy manifests continuous strengthening reaching 1.2 GPa at extremely fine TB spacing of ∼ 2 nm, associated with excellent structural-mechanical stability after high-temperature (0.5 T m of Cu) annealing. The underlying mechanism mainly originates from the highly stabilized defective CTBs controlled by Cr-segregation at kinks and TB-GB junctions, which facilitates the plastic deformation mode transition: from detwinning dislocation nucleation to stacking faults (SFs) accumulation for ultrahigh strength. Under elevated temperature, the stabilized TBs inhibit GB motion and therefore result in enhanced thermal stability of NNT Cu-Cr alloys, which is quantitatively explained via a modified Zenner pinning model. Our findings not only deepen the understanding of deformation mechanisms in nanotwinned metals, but also provide a new perspective to design plainified Cu alloys with high performances.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Ion-surface interactions and analysis · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (71)
Show source-provided references
1. Growth twins and deformation twins in metals10.1146/annurev-matsci-070813-113304 ↗
2. Nanomechanics of Hall–Petch relationship in nanocrystalline materials10.1016/j.pmatsci.2009.03.008 ↗
3. On the validity of the hall-petch relationship in nanocrystalline materials10.1016/0036-9748(89)90342-6 ↗
4. Ultrastrong nanotwinned pure nickel with extremely fine twin thickness10.1126/sciadv.abg5113 ↗
5. Softening of nanocrystalline metals at very small grain sizes10.1038/35328 ↗
6. Breakdown of the Hall-Petch relationship in extremely fine nanograined body-centered cubic Mo alloys10.1016/j.actamat.2021.116950 ↗
7. Dislocation nucleation governed softening and maximum strength in nano-twinned metals10.1038/nature08929 ↗
8. Revealing the maximum strength in nanotwinned copper10.1126/science.1167641 ↗
9. Ideal maximum strengths and defect-induced softening in nanocrystalline-nanotwinned metals10.1038/s41563-019-0484-3 ↗
10. Rapid heating induced ultrahigh stability of nanograined copper10.1126/sciadv.aaz8003 ↗
11. Design of stable nanocrystalline alloys10.1126/science.1224737 ↗
12. Size dependence of grain boundary migration in metals under mechanical loading10.1103/PhysRevLett.122.126101 ↗
13. Ultrahigh strength and high electrical conductivity in copper10.1126/science.1092905 ↗
14. Transition of dislocation nucleation induced by local stress concentration in nanotwinned copper10.1038/ncomms8648 ↗
15. Defective twin boundaries in nanotwinned metals10.1038/nmat3646 ↗
16. Detwinning mechanisms for growth twins in face-centered cubic metals10.1016/j.actamat.2009.12.013 ↗
17. Mapping plasticity10.1038/nmat1053 ↗
18. Influence of intrinsic kink-like defects on screw dislocation–coherent twin boundary interactions in copper10.1016/j.actamat.2016.10.032 ↗
19. Twinning/detwinning-mediated grain growth and mechanical properties of free-standing nanotwinned Ni foils: grain size and strain rate effects10.1016/j.msea.2015.01.015 ↗
20. High-Strength Nanotwinned Al Alloys with 9R Phase
21. Scaling of maximum strength with grain size in nanotwinned fcc metals10.1103/PhysRevB.83.132104 ↗
22. Stabilizing nanostructures in metals using grain and twin boundary architectures10.1038/natrevmats.2016.19 ↗
23. Grain boundary stability governs hardening and softening in extremely fine nanograined metals10.1126/science.aal5166 ↗
24. Reaching theoretical strengths in nanocrystalline Cu by grain boundary doping10.1016/j.scriptamat.2011.06.048 ↗
25. Thick amorphous complexion formation and extreme thermal stability in ternary nanocrystalline Cu-Zr-Hf alloys10.1016/j.actamat.2019.08.031 ↗
26. Zr alloying effect on the microstructure evolution and plastic deformation of nanostructured Cu thin films10.1016/j.actamat.2017.05.007 ↗
27. Nanotwinned metal MEMS films with unprecedented strength and stability10.1126/sciadv.1700685 ↗
28. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
29. Materials selection rules for amorphous complexion formation in binary metallic alloys10.1016/j.actamat.2017.08.042 ↗
30. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
31. Scalable parallel Monte Carlo algorithm for atomistic simulations of precipitation in alloys10.1103/PhysRevB.85.184203 ↗
32. A unified formulation of the constant temperature molecular dynamics methods10.1063/1.447334 ↗
33. Canonical dynamics: equilibrium phase-space distributions10.1103/PhysRevA.31.1695 ↗
34. Topographic distance and watershed lines10.1016/0165-1684(94)90060-4 ↗
35. Model interatomic potentials and lattice strain in a high-entropy alloy10.1557/jmr.2018.245 ↗
36. Embedded-atom method: derivation and application to impurities, surfaces, and other defects in metals10.1103/PhysRevB.29.6443 ↗
37. Dynamic interactions between low-angle grain boundary and stacking fault tetrahedron in Ni-Fe solid solution alloys10.1016/j.jallcom.2022.164572 ↗
38. Research on solid-phase sintering mechanism and mechanical properties of Fe9.5Co (at%) elastocaloric refrigeration alloy through molecular dynamics simulation10.1016/j.jmrt.2022.05.163 ↗
39. Study on sintering mechanism and mechanical properties of Fe–Ni elastocaloric refrigeration alloy through molecular dynamics simulation
40. Study on nanoscale friction and wear mechanism of nickel-based single crystal superalloy by molecular dynamics simulations10.1016/j.triboint.2021.107322 ↗
41. Structural stability and lattice defects in copper: ab initio, tight-binding, and embedded-atom calculations10.1103/PhysRevB.63.224106 ↗
42. Dislocation–twin interaction mechanisms for ultrahigh strength and ductility in nanotwinned metals10.1016/j.actamat.2009.06.015 ↗
43. Deformation mechanisms, length scales and optimizing the mechanical properties of nanotwinned metals10.1016/j.actamat.2011.07.038 ↗
44. Fast parallel algorithms for short-range molecular dynamics10.1006/jcph.1995.1039 ↗
45. AtomEye: an efficient atomistic configuration viewer10.1088/0965-0393/11/2/305 ↗
46. Visualization and analysis of atomistic simulation data with OVITO–the Open Visualization Tool
47. Dislocation detection algorithm for atomistic simulations10.1088/0965-0393/18/2/025016 ↗
48. High resolution transmission electron microscope observation of zero-strain deformation twinning mechanisms in Ag10.1103/PhysRevLett.106.175504 ↗
49. Twinning via the motion of incoherent twin boundaries nucleated at grain boundaries in a nanocrystalline Cu alloy10.1016/j.scriptamat.2013.10.014 ↗
50. Nanocrystalline Ag-W alloys lose stability upon solute desegregation from grain boundaries10.1016/j.actamat.2018.09.014 ↗
51. Nanostructure and mechanical behavior of metastable Cu–Cr thin films grown by molecular beam epitaxy10.1016/j.actamat.2014.10.013 ↗
52. Orientation-dependent hardness and strain rate sensitivity in nanotwin copper10.1063/1.4731242 ↗
53. Orientation-dependent mechanical behaviour of electrodeposited copper with nanoscale twins10.1039/C6NR05116B ↗
54. Size effects on yield strength and strain hardening for ultra-thin Cu films with and without passivation: a study by synchrotron and bulge test techniques10.1016/j.actamat.2008.01.027 ↗
55. Near-perfect elastoplasticity in pure nanocrystalline copper10.1126/science.1081042 ↗
56. Tensile properties of in situ consolidated nanocrystalline Cu10.1016/j.actamat.2004.12.005 ↗
57. Dependence of strain rate sensitivity upon deformed microstructures in nanocrystalline Cu10.1016/j.actamat.2010.05.055 ↗
58. A unified mechanistic model for size-dependent deformation in nanocrystalline and nanotwinned metals10.1016/j.actamat.2011.07.019 ↗
59. Enhanced strain-rate sensitivity in fcc nanocrystals due to grain-boundary diffusion and sliding10.1016/j.actamat.2007.12.028 ↗
60. Twisting of pre-twinned α-Fe nanowires: from mild to wild avalanche dynamics10.1016/j.actamat.2020.04.023 ↗
61. Phase separation of a supersaturated nanocrystalline Cu–Co alloy and its influence on thermal stability10.1016/j.actamat.2015.05.053 ↗
62. Superior thermal stability of coherent twin boundaries in nanotwinned metals10.1016/j.scriptamat.2012.01.026 ↗
63. Tuning element distribution, structure and properties by composition in high-entropy alloys10.1038/s41586-019-1617-1 ↗
64. Columnar grain-driven plasticity and cracking in nanotwinned FCC metals10.1016/j.actamat.2021.116925 ↗
65. Transition from source- to stress-controlled plasticity in nanotwinned materials below a softening temperature10.1038/s41524-019-0156-5 ↗
66. Mechanistic models for the activation volume and rate sensitivity in metals with nanocrystalline grains and nano-scale twins10.1016/j.actamat.2005.03.047 ↗
67. Humphreys · 2012
68. Formation of stable Schwarz crystals in polycrystalline copper at the grain size limit10.1103/PhysRevLett.127.136101 ↗
69. Thermal stability of sputtered Cu films with nanoscale growth twins10.1063/1.2913322 ↗
70. Constrained minimal-interface structures in polycrystalline copper with extremely fine grains10.1126/science.abe1267 ↗
71. Dislocation nucleation and defect structure during surface indentation10.1103/PhysRevB.58.11085 ↗