First-principles study of oxygen segregation and its effect on the embrittlement of molybdenum symmetrical tilt grain boundaries
Source abstract
Abstract
Elemental segregation can pronouncedly affect the cohesion of grain boundary (GB), which shows tremendous potential in altering the thermal stability and mechanical properties of metals. In this work, we systematically investigate the segregation behavior of oxygen (O) atoms at a series of GBs in molybdenum (Mo), using first principles calculations, to reveal the effect of O segregation on the embrittlement of Mo GBs. It is found that O atoms energetically prefer to segregate at sites in both the GB core and the vicinity of the GB plane. The strengthening energy is strongly associated with the GB structure, and it linearly decreases with the continuous deformation of the GB. O segregation can lead to an increase in the volume of polyhedron sites and a decrease in the charge density among adjacent Mo atoms across the GB plane. The weakened Mo-Mo bonds are believed to disrupt the GB cohesion, thereby increasing the intergranular cleavage tendency of Mo. Interestingly, O segregation does not always trigger GB embrittlement. The Σ5(310)[001] symmetric tilt grain boundary (STGB) with an O atom doped at the cap trigonal prism (CTP) site possesses a strength as strong as the clean GB. O segregation promotes the generation of Mo-O bonds across the GB plane, which counteracts the adverse effect of weakened Mo-Mo bonds. This work deepens the understanding of the possible effect of O segregation on GB cohesion of Mo from the atomic and electronic scales, providing guidance for enhancing the mechanical properties of Mo via GB structure optimization.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (84)
Show source-provided references
1. Interfacial segregation and grain boundary embrittlement: an overview and critical assessment of experimental data and calculated results10.1016/j.pmatsci.2016.11.001 ↗
2. Grain boundary stability governs hardening and softening in extremely fine nanograined metals10.1126/science.aal5166 ↗
3. Grain boundary complexions10.1016/j.actamat.2013.07.037 ↗
4. First-principles study of the effect of phosphorus on nickel grain boundary
5. Effect of interstitial impurities on grain boundary cohesive strength in vanadium10.1016/j.commatsci.2015.08.028 ↗
6. Unexpected high-temperature brittleness of a Mg-Gd-Y-Ag alloy10.1016/j.jma.2021.06.018 ↗
7. Manipulating the interfacial structure of nanomaterials to achieve a unique combination of strength and ductility10.1038/ncomms10802 ↗
8. Fracture toughness of polycrystalline tungsten alloys10.1016/j.ijrmhm.2010.04.007 ↗
9. How grain boundary chemistry controls the fracture mode of molybdenum10.1016/j.matdes.2018.01.012 ↗
10. Low cycle fatigue behaviors of pure Mo and Mo-La2O3 alloys10.1016/j.msea.2017.09.064 ↗
11. The fracture toughness and toughening mechanism of commercially available unalloyed molybdenum and oxide dispersion strengthened molybdenum with an equiaxed, large grain structure10.1007/s11661-009-9919-9 ↗
12. Grain boundary structure, energy and strength in molybdenum10.1016/0921-5093(94)90997-0 ↗
13. Grain boundary segregation and intergranular fracture in molybdenum
14. Fracture toughness of sintered Mo-La2O3 alloy and the toughening mechanism10.1016/S0263-4368(99)00030-X ↗
15. Methods for improving the ductility of molybdenum10.1016/0022-5088(67)90013-6 ↗
16. Ductility and fracture toughness of molybdenum with MgAl2O4 additions10.1016/j.msea.2006.12.128 ↗
17. Coupling effect of intergranular and intragranular particles on ductile fracture of Mo-La2O3 alloys10.1016/j.msea.2015.05.032 ↗
18. Microstructure and strengthening mechanism of oxide lanthanum dispersion strengthened molybdenum alloy10.1002/adem.200400072 ↗
19. Laser seal welding of end plug to thin-walled nanostructured high-strength molybdenum alloy cladding with a zirconium interlayer10.1016/j.jmatprotec.2018.12.028 ↗
20. Uncovering the weakening mechanism of electron beam welded joints of La2O3 dispersion strengthened molybdenum alloy: experiment and simulation10.1016/j.matlet.2022.133586 ↗
21. Enhanced mechanical performance of fusion zone in laser beam welding joint of molybdenum alloy due to solid carburizing10.1016/j.matdes.2019.107957 ↗
22. Interrelation of impurity enrichment of grain boundaries and the cold shortness point during annealing of molybdenum
23. Chemical states of oxygen segregated intergranular fracture surfaces of molybdenum10.1016/0169-4332(86)90051-6 ↗
24. Surface analysis and grain-boundary segregation measurements using atom-probe techniques10.1016/0039-6028(79)90651-4 ↗
25. Ab initio description of segregation and cohesion of grain boundaries in W-25at.% Re alloys10.1016/j.actamat.2014.12.053 ↗
26. A first principles investigation of zinc induced embrittlement at grain boundaries in bcc iron10.1016/j.actamat.2015.02.018 ↗
27. Origin of the Bismuth-induced decohesion of nickel and copper grain boundaries10.1103/PhysRevLett.111.055502 ↗
28. Effect of impurity and alloying elements on Zr grain boundary strength from first-principles computations10.1016/j.jnucmat.2010.07.012 ↗
29. Segregation-induced changes in grain boundary cohesion and embrittlement in binary alloys10.1016/j.actamat.2015.05.004 ↗
30. Embrittlement of interfaces by solute segregation10.1016/0921-5093(89)90372-9 ↗
31. Sodium-induced embrittlement of an aluminum grain boundary10.1103/PhysRevB.82.224107 ↗
32. Weakening of an aluminum grain boundary induced by sulfur segregation: a first-principles computational tensile test10.1103/PhysRevB.75.174101 ↗
33. First principles investigation of zinc-induced embrittlement in an aluminum grain boundary10.1016/j.actamat.2011.06.028 ↗
34. Aluminum grain boundary decohesion by dense sodium segregation10.1103/PhysRevB.85.214109 ↗
35. Atomistic modelling of zirconium and silicon segregation at twist and tilt grain boundaries in molybdenum10.1007/s10853-015-9494-y ↗
36. Dissolution and diffusion of hydrogen in a molybdenum grain boundary: a first-principles investigation10.1016/j.commatsci.2015.02.049 ↗
37. On grain boundary segregation in molybdenum materials10.1016/j.matdes.2017.09.019 ↗
38. Ab-initio search for cohesion-enhancing solute elements at grain boundaries in molybdenum and tungsten10.1016/j.ijrmhm.2016.07.003 ↗
39. Segregated light elements at grain boundaries in niobium and molybdenum10.1103/PhysRevB.67.224101 ↗
40. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
41. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
42. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
43. Linear optical properties in the projector-augmented wave methodology10.1103/PhysRevB.73.045112 ↗
44. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
45. First-principles study of polar Al/TiN(111) interfaces10.1016/j.actamat.2004.04.022 ↗
46. Erratum: atoms, molecules, solids, and surfaces: applications of the generalized gradient approximation for exchange and correlation10.1103/PhysRevB.48.4978.2 ↗
47. First-principles study on the P-induced embrittlement and de-embrittling effect of B and C in ferritic steels10.1016/j.actamat.2021.117260 ↗
48. The effect of segregated sp-impurities on grain-boundary and surface structure, magnetism and embrittlement in nickel10.1016/j.pmatsci.2011.01.008 ↗
49. First-principles determination of grain boundary strengthening in tungsten: dependence on grain boundary structure and metallic radius of solute10.1016/j.actamat.2016.08.048 ↗
50. Lejcek · 2010
51. Factors controlling segregation tendency of solute Ti, Ag and Ta into different symmetrical tilt grain boundaries of tungsten: first-principles and experimental study10.1016/j.actamat.2021.116868 ↗
52. Segregation of solute atoms (Y, Nb, Ta, Mo and W) in ZrB2 grain boundaries and their effects on grain boundary strengths: a first-principles investigation10.1016/j.actamat.2017.01.048 ↗
53. First-principles investigation on electronic structures and energetic characteristics of γ/γ tilt grain boundaries in γ-TiAl intermetallic10.1016/j.intermet.2022.107723 ↗
54. Change of mechanical property and fracture mode of molybdenum by carbon addition10.2320/matertrans.M2009377 ↗
55. Ab initio calculation of traction separation laws for a grain boundary in molybdenum with segregated C impurites10.1088/0965-0393/21/7/075005 ↗
56. First-principles study on the grain boundary embrittlement of metals by solute segregation: part I. Iron (Fe)-solute (B, C, P, and S) systems10.1007/s11661-010-0381-5 ↗
57. First principle studies of effects of solute segregation on grain boundary strength in Ni-based alloys10.1016/j.jallcom.2021.159795 ↗
58. Effect of Mo and Pd on the grain-boundary cohesion of Fe10.1103/PhysRevB.62.6208 ↗
59. Cohesive and magnetic properties of grain boundaries in bcc Fe with Cr additions10.1103/PhysRevB.81.094104 ↗
60. Origin of intergranular embrittlement of Al alloys induced by Na and Ca segregation: grain boundary weakening10.1103/PhysRevB.73.224115 ↗
61. Effect of lateral contraction and magnetism on the energy release upon fracture in metals: first-principles computational tensile tests10.1103/PhysRevB.79.144114 ↗
62. Hydrogen embrittlement of a carbon segregated Σ5(310)[001]symmetrical tilt grain boundary in α-Fe10.1016/j.msea.2014.06.071 ↗
63. The effect of vanadium impurity on Nickel Σ5(012) grain boundary10.1016/j.msea.2013.04.047 ↗
64. Uncovering the influence of common nonmetallic impurities on the stability and strength of a Σ5 (310) grain boundary in Cu10.1016/j.actamat.2018.01.058 ↗
65. Ab initio calculations of grain boundaries in bcc metals10.1088/0965-0393/24/3/035013 ↗
66. Symmetrical tilt grain boundaries in body-centred cubic transition metals: an ab initio local-density-functional study10.1080/01418610008212057 ↗
67. Chemomechanical effects on the separation of interfaces occurring during fracture with emphasis on the hydrogen-iron and hydrogen-nickel system10.1016/j.actamat.2015.07.057 ↗
68. Combined effects of nonmetallic impurities and planned metallic dopants on grain boundary energy and strength10.1016/j.actamat.2018.12.031 ↗
69. An understanding of hydrogen embrittlement in nickel grain boundaries from first principles10.1016/j.matdes.2021.110283 ↗
70. Correlation of grain boundary extra free volume with vacancy and solute segregation at grain boundaries: a case study for Al10.1080/14786435.2017.1408968 ↗
71. First-principles calculation of grain boundary energy and grain boundary excess free volume in aluminum: role of grain boundary elastic energy10.1007/s10853-011-5305-2 ↗
72. Solute segregation in Cu: DFT vs. experiment10.1016/j.actamat.2018.01.011 ↗
73. Lattice distortion induced site dependent carbon gettering at twin boundaries in silicon10.1016/j.jallcom.2017.04.111 ↗
74. Computational study of metallic dopant segregation and embrittlement at molybdenum grain boundaries10.1016/j.actamat.2016.07.005 ↗
75. In situ TEM observations on the structural evolution of a nanocrystalline W-Ti alloy at elevated temperatures10.1016/j.jallcom.2018.03.335 ↗
76. Ab initio search for cohesion-enhancing impurity elements at grain boundaries in molybdenum and tungsten10.1088/0965-0393/24/8/085009 ↗
77. Entropy matters in grain boundary segregation10.1016/j.actamat.2020.116597 ↗
78. First-principles study of carbon segregation in bcc iron symmetrical tilt grain boundaries10.1016/j.actamat.2016.04.058 ↗
79. Synthesis and structure-activity characterization of a single-site MoO2 catalytic center anchored on reduced graphene oxide10.1021/jacs.1c07236 ↗
80. Electronic structure of MoO2. DFT periodic and cluster model studies10.1016/j.apcata.2010.07.041 ↗
81. Segregation of Mg, Cu and their effects on the strength of Al Σ5 (210)[001]symmetrical tilt grain boundary10.1016/j.actamat.2017.12.023 ↗
82. Surface studies with an imaging atom-probe10.1016/0039-6028(77)90192-3 ↗
83. Grain boundary engineering for structure materials of nuclear reactors10.1016/j.jnucmat.2013.03.050 ↗
84. Grain boundary engineering: historical perspective and future prospects10.1007/s10853-011-5393-z ↗