Shear banding-activated dynamic recrystallization and phase transformation during quasi-static loading of β-metastable Ti – 12 wt % Mo alloy
Source abstract
Abstract
Abstract: Dynamic recrystallization (DRX) within adiabatic shear bands forming during the fracture of TRIP-TWIP β−metastable Ti-12Mo (wt %) alloy was recently reported. The formation of 1-3 µm thick-adiabatic shear bands, and of dynamic recrystallization, was quite surprising as their occurrence generally requires high temperature and/or high strain rate loading while these samples were loaded in quasi-static conditions at room temperature. To better understand the fracture mechanism and associated microstructural evolution, thin foils representative of different stages of the fracture process were machined from the fracture surface by Focused Ion Beam (FIB) and analyzed by Transmission Electron Microscopy (TEM) and Automated Crystal Orientation mapping (ACOM-TEM). Complex microstructure transformations involving severe plastic deformed nano-structuration, crystalline rotation and local precipitation of the omega phase were identified. The spatial and temporal evolution of the microstructure during the propagation of the crack was explained through dynamic recovery and continuous dynamic recrystallization, and linked to the modelled distribution of temperature and strain level where TEM samples were extracted.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Metallurgy and Material Forming · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. On the design of new β-metastable titanium alloys with improved work hardening rate thanks to simultaneous TRIP and TWIP effects10.1016/j.scriptamat.2012.01.049 ↗
2. Investigation of early stage deformation mechanisms in a metastable beta titanium alloy showing combined twinning-induced plasticity and transformation-induced plasticity effects10.1016/j.actamat.2013.07.019 ↗
3. The influence of beta phase stability on deformation mode and compressive mechanical properties of Ti –10V –3Fe –3Al alloy10.1016/j.actamat.2014.10.043 ↗
4. A new titanium alloy with a combination of high strength, high strain hardening and improved ductility10.1016/j.scriptamat.2014.09.005 ↗
5. A β-titanium alloy with extra high strain-hardening rate: design and mechanical properties10.1016/j.scriptamat.2015.11.020 ↗
6. Partial recrystallization of gum metal to achieve enhanced strength and ductility10.1016/j.actamat.2017.06.051 ↗
7. On the heterogeneous nature of deformation in a strain-transformable beta metastable Ti-V-Cr-Al alloy10.1016/j.actamat.2018.10.003 ↗
8. Segregation mediated heterogeneous structure in a metastable β titanium alloy with a superior combination of strength and ductility
9. High temperature rise dominated cracking mechanisms in ultra-ductile and tough titanium alloy10.1038/s41467-020-15772-1 ↗
10. Temperature rise up to melting under quasi-static loading conditions induced by adiabatic shear banding10.1016/j.matdes.2021.110269 ↗
11. Fracture mechanisms in flat and cylindrical tensile specimens of TRIP-TWIP β-metastable Ti-12Mo alloy10.1016/j.actamat.2021.117294 ↗
12. The instability of liquid surfaces when accelerated in a direction perpendicular to their planes10.1098/rspa.1950.0052 ↗
13. The mechanism of fracture in glassy materials capable of some inelastic deformation10.1016/0025-5416(76)90198-1 ↗
14. A review of dynamic recrystallization phenomena in metallic materials
15. Current issues in recrystallization: a review10.1016/S0921-5093(97)00424-3 ↗
16. Microstructure control techniques in primary hot working of titanium alloy bars: a review10.1016/j.cja.2015.07.011 ↗
17. The dependence of grain size on stress during dynamic recrystallisation10.1016/0956-7151(91)90295-C ↗
18. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions10.1016/j.pmatsci.2013.09.002 ↗
19. Hot deformation and dynamic recrystallization of the beta phase in titanium alloys10.4028/www.scientific.net/MSF.706-709.127 ↗
20. Texture evolution and dynamic recrystallization in a beta titanium alloy during hot-rolling process10.1016/j.jallcom.2014.08.129 ↗
21. Development of dynamic recrystallization theory10.1016/j.msea.2004.01.064 ↗
22. Crystal plasticity modeling of the dynamic recrystallization of two-phase titanium alloys during isothermal processing10.1016/j.ijplas.2013.05.001 ↗
23. Dynamic recrystallization in adiabatic shear band in α-titanium10.1016/j.matlet.2005.12.097 ↗
24. Microstructural characterization and evolution mechanism of adiabatic shear band in a near beta-Ti alloy10.1016/j.msea.2010.12.053 ↗
25. Strain rate dependence of microstructural evolution in β titanium alloy during subtransus superplastic deformation10.1016/j.jallcom.2015.06.070 ↗
26. Deformation behaviour and mechanisms during hot compression at supertransus temperatures in Ti-10V-2Fe-3Al10.1016/j.jallcom.2017.03.219 ↗
27. The role of dynamic and post dynamic recrystallization on microstructure refinement in primary working of a coarse grained two-phase titanium alloy10.1016/j.jmatprotec.2016.03.031 ↗
28. Characteristics of a hot-rolled near β titanium alloy Ti-733310.1016/j.matchar.2017.04.031 ↗
29. Hot deformation mechanism and microstructure evolution of TC11 titanium alloy in β field10.1016/S1003-6326(08)60175-2 ↗
30. Microstructure and mechanical property correlation and property optimization of a near beta titanium alloy Ti-733310.1016/j.jallcom.2016.04.303 ↗
31. On the nucleation mechanism of {112} <111> mechanical twins in as-quenched β metastable Ti-12 wt.% Mo alloy10.1016/j.mtla.2019.100418 ↗
32. Deformation behavior of age-hardened Ti-Mo alloys10.1016/0001-6160(74)90057-1 ↗
33. Strong deformation anisotropies of \omega-precipitates and strengthening mechanisms in Ti-10V-2Fe-3Al alloy micropillars: precipitates shearing vs precipitates disordering10.1016/j.actamat.2016.06.065 ↗
34. Texture formation in metal alloys with cubic crystal structures10.1080/02670836.2016.1231746 ↗
35. Texture inhomogeneity in a Ti-Nb-based β-titanium alloy after warm rolling and recrystallization10.1016/j.msea.2007.06.077 ↗
36. Dynamic recrystallization in high strain rate deformation
37. Shear localization and recrystallization in high-strain, high-strain-rate deformation of tantalum10.1016/S0921-5093(96)10847-9 ↗
38. Texture evolution during grain growth in recrystallized commercially pure titanium10.1016/j.msea.2005.02.049 ↗
39. Effects of recrystallization on microstructure and texture evolution of cold-rolled Ti-6Al-4V alloy10.1007/s11665-016-2006-7 ↗
40. Dynamic deformation and failure of ultrafine-grained titanium10.1016/j.actamat.2016.11.041 ↗
41. Observation of an adiabatic shear band in titanium by high-voltage transmission electron microscopy10.1016/0001-6160(86)90152-5 ↗
42. Shear localization in dynamic deformation of materials: microstructural evolution and self-organization10.1016/S0921-5093(01)01160-1 ↗
43. Necking in tensile bars with rectangular cross-section10.1016/0045-7825(93)90049-4 ↗
44. Structural and mechanical properties of nanocrystalline titanium processed by severe plastic deformation10.1016/S1359-6462(97)00210-8 ↗
45. Mechanical behavior and superplasticity of a severe plastic deformation processed nanocrystalline Ti–6Al–4V alloy10.1016/S0921-5093(00)01338-1 ↗
46. Formation of nanocrystalline β structure in metastable beta Ti alloy during high pressure torsion: the role played by stress induced martensitic transformation10.1016/j.actamat.2015.06.042 ↗
47. Microstructural evolution of a ductile metastable β titanium alloy with combined TRIP/TWIP effects10.1016/j.jallcom.2016.12.394 ↗
48. Adiabatic shear bands in titanium and titanium alloys: a critical review10.1016/0261-3069(93)90078-A ↗
49. Observations on the effect of temperature rise at fracture in two titanium alloys10.1016/0025-5416(86)90356-3 ↗