Quantitative prediction of Suzuki segregation at stacking faults of the γ’ phase in Ni-base superalloys
Source abstract
Abstract
Abstract Recent experiments suggest that Suzuki segregation may play an important role during deformation in Ni-base superalloys at intermediate temperatures. In this study, a segregation isotherm model incorporating segregation enthalpy from ab initio calculations is proposed to predict quantitatively solute enrichment at superlattice intrinsic stacking faults (SISF) within the γ’ precipitates in Ni-base superalloys. A sublattice model is employed to describe the γ’ phase. A strong correlation between segregation enthalpy and solute enrichment is found. Even though the segregation enthalpy is relatively small, the predicted solute enrichment is consistent with experimental observations. The simulation predictions also suggest a strong cross-correlation among different alloying elements. For example, it is found that segregation of Co on the Ni sublattice at the fault draws segregation of Cr that has a positive segregation enthalpy at the fault without the presence of Co. Such quantitative predictions of equilibrium segregation of solutes at stacking faults in γ’ precipitates and its effect on the stacking fault energy could aid the investigation of deformation mechanisms and help the design of superalloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties · nanoparticles nucleation surface interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. The effects of strain-ageing due to interstitial solutes on the mechanical properties of metals10.1179/095066071790137928 ↗
2. Grain boundary segregation engineering in metallic alloys: A pathway to the design of interfaces10.1016/j.cossms.2014.06.002 ↗
3. The Portevin–Le Chatelier effect: a review of experimental findings10.1088/1468-6996/12/6/063001 ↗
4. Periodic segregation of solute atoms in fully coherent twin boundaries10.1126/science.1229369 ↗
5. Critical point wetting10.1063/1.434402 ↗
6. A phase-field model for diffusion-induced grain-boundary motion10.1016/S1359-6454(97)00074-8 ↗
7. Linear complexions: confined chemical and structural states at dislocations10.1126/science.aab2633 ↗
8. Solute segregation transition and drag force on grain boundaries10.1016/S1359-6454(03)00184-8 ↗
9. Solid-state wetting transitions at grain boundaries10.1016/j.msea.2007.09.091 ↗
10. Segregation and wetting transition at dislocations10.1007/s11661-006-0119-6 ↗
11. Grain boundary segregation, solute drag and abnormal grain growth10.1016/j.actamat.2008.04.007 ↗
12. Grain boundary complexions10.1016/j.actamat.2013.07.037 ↗
13. Grain boundary transitions in binary alloys10.1103/PhysRevLett.97.075502 ↗
14. Segregation of solute atoms to stacking faults10.1143/JPSJ.17.322 ↗
15. Chemical interaction of solute atoms with dislocations, Science Reports of the Research Institutes, Tohoku University
16. Primary creep in single crystal superalloys: origins, mechanisms and effects10.1016/j.actamat.2006.09.026 ↗
17. High-resolution electron microscopy of dislocation ribbons in a CMSX-4 superalloy single crystal10.1016/j.actamat.2012.05.014 ↗
18. Atomic-scale characterization and modeling of 60 dislocations in a high-entropy alloy10.1016/j.actamat.2016.03.045 ↗
19. Atomistic simulations of dislocation behavior in a model FCC multicomponent concentrated solid solution alloy10.1016/j.actamat.2017.05.071 ↗
20. Effects of the stacking fault energy fluctuations on the strengthening of alloys10.1016/j.actamat.2018.09.066 ↗
21. R. Zhang, S. Zhao, J. Ding, Y. Chong, T. Jia, C. Ophus, M. Asta, R.O. Ritchie, A.M. Minor, Verification of Short-Range Order and Its Impact on the Properties of the CrCoNi Medium Entropy Alloy, ArXiv Preprint ArXiv:1912.05610. (2019).
22. Dislocation theory of yielding and strain ageing of iron10.1088/0370-1298/62/1/308 ↗
23. Grain boundary segregation
24. Atomic resolution observations of solute-atom segregation effects and phase transitions in stacking faults in dilute cobalt alloys—I. Experimental results10.1016/0001-6160(85)90055-0 ↗
25. Atomic resolution observations of solute-atom segregation effects and phase transitions in stacking faults in dilute cobalt alloys—II. Analyses and discussion10.1016/0001-6160(85)90056-2 ↗
26. Experimental evidence for Suzuki segregation to the stacking fault of an extended dislocation in a Cu-Si alloy10.1080/01418618308243113 ↗
27. Direct evidence for Suzuki segregation obtained by high-resolution analytical electron microscopy10.1080/09500839208206009 ↗
28. Suzuki segregation in a binary Cu-Si alloy
29. Direct evidence for Suzuki segregation and Cottrell pinning in MP159 superalloy obtained by FEG(S)TEM/EDX10.1016/S1359-6454(02)00359-2 ↗
30. Direct observation of dislocation dissociation and Suzuki segregation in a Mg–Zn–Y alloy by aberration-corrected scanning transmission electron microscopy10.1016/j.actamat.2012.09.067 ↗
31. Segregation at stacking faults within the γ′ phase of two Ni-base superalloys following intermediate temperature creep10.1016/j.scriptamat.2014.06.032 ↗
32. Atomistic phase field chemomechanical modeling of dislocation-solute-precipitate interaction in Ni–Al–Co10.1016/j.actamat.2019.06.008 ↗
33. Segregation and phase transformations along superlattice intrinsic stacking faults in Ni-based superalloys10.1007/s11661-018-4701-5 ↗
34. Effect of stacking fault segregation and local phase transformations on creep strength in Ni-base superalloys10.1016/j.actamat.2019.04.038 ↗
35. Segregation and η phase formation along stacking faults during creep at intermediate temperatures in a Ni-based superalloy10.1016/j.actamat.2015.08.053 ↗
36. Solute segregation and deviation from bulk thermodynamics at nanoscale crystalline defects10.1126/sciadv.1601796 ↗
37. Segregation-assisted plasticity in Ni-based superalloys10.1007/s11661-018-4567-6 ↗
38. Segregation assisted microtwinning during creep of a polycrystalline L12-hardened Co-base superalloy10.1016/j.actamat.2016.10.048 ↗
39. Segregation of alloying elements to planar faults in γ’-Ni3Al10.1016/j.actamat.2018.01.055 ↗
40. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
41. J.P. Perdew, K. Burke, M. Ernzerhof, Generalized gradient approximation made simple, Phys. Rev. Lett.7710.1103/PhysRevLett.77.3865 ↗
42. Press · 1992
43. Special points for Brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
44. Diffusion processes during creep at intermediate temperatures in a Ni-based superalloy10.1016/j.actamat.2017.09.027 ↗
45. Site preference of ternary additions in ${\mathrm{Ni}}3$Al10.1103/PhysRevB.51.4062 ↗
46. Alloying element additions to Ni3Al: Site preferences and effects on elastic properties from first-principles calculations10.1016/j.commatsci.2011.09.016 ↗
47. Chromium and tantalum site substitution patterns in Ni3Al(L12) γ′-precipitates10.1063/1.2956398 ↗
48. The partitioning and site preference of rhenium or ruthenium in model nickel-based superalloys: An atom-probe tomographic and first-principles study10.1063/1.2998654 ↗
49. Thermodynamic re-assessment of the ternary system Al-Cr-Ni10.1016/S0364-5916(01)00049-9 ↗
50. Thermodynamic modeling of Al–Co–Cr, Al–Co–Ni, Co–Cr–Ni ternary systems towards a description for Al–Co–Cr–Ni10.1016/j.calphad.2015.12.007 ↗
51. The role of atomic scale segregation in designing highly ductile magnesium alloys10.1016/j.actamat.2016.06.024 ↗
52. Porter · 1992
53. Lejcek · 2010
54. Tight-binding calculation of the solute-dislocation interaction energy in nickel: Effect of atomic relaxation10.1080/13642819008208631 ↗
55. Quantitative prediction of solute strengthening in aluminium alloys10.1038/nmat2813 ↗