Zr alloying effect on the microstructure evolution and plastic deformation of nanostructured Cu thin films
Source abstract
Abstract
Abstract The magnetron sputtering technique was employed to prepare Zr-alloyed Cu thin films with Zr addition ranging from 0 to 7.0 at.%. Microstructure evolution with Zr doping was characterized by using the transmission electron microscope and atom probe tomography. Plastic deformation characteristics (hardness, strain rate sensitivity and activation volume) of the Cu-Zr alloyed films were examined by using nanoindentation testing. Significant Zr doping effects on the microstructure were clearly uncovered that (i) the Zr segregated at grain boundaries and tuned the grain boundary structure. With increasing the Zr addition, CuZr amorphous particles at grain boundaries (3.0 at.% Zr) and even three dimensional CuZr amorphous grain boundary network (7.0 at.% Zr) were formed; (ii) the grains (size and morphology) and nanotwins were notably influenced by the Zr doping. In particular, the nanotwin thickness was reduced from ∼25 nm in the pure Cu film down to ∼5 nm in the Cu-Zr alloyed films. Accompanied with the microstructure evolution, the Cu-Zr thin films displayed hardness and strain rate sensitivity highly sensitive to the Zr doping, i.e. , hardness increasing while strain rate sensitivity decreasing with raising the Zr addition. The strengthening and deformation mechanisms were discussed in terms of the microstructure-property relationship. Three regimes were divided within the studied Zr doping range: grain/nanotwin boundary-dominated strengthening mechanism in the regime I of pure Cu film, dislocation nucleation-controlled nanotwin softening mechanism in the regime II of Zr addition ≤3.0 at.%, and intergranular amorphous layer-mediated strengthening mechanism in the regime III of Zr addition up to 7.0 at.%. In addition, the reduction in strain rate sensitivity with Zr doping was quantitatively described by adopting a model that involves the thermally activated partials depinning mechanism based on the effective dislocation segment length.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metal and Thin Film Mechanics · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (92)
Show source-provided references
1. Ultrahigh strength and high electrical conductivity in copper10.1126/science.1092905 ↗
2. Crack nucleation during mechanical fatigue in thin metal films on flexible substrates10.1016/j.actamat.2013.02.041 ↗
3. The effect of film thickness on the failure strain of polymer-supported metal films10.1016/j.actamat.2009.11.010 ↗
4. Epitaxial nanotwinned Cu films with high strength and high conductivity10.1063/1.2969409 ↗
5. Defective twin boundaries in nanotwinned metals10.1038/nmat3646 ↗
6. Plastic flow stability of nanotwinned Cu foils10.1016/j.ijplas.2009.11.003 ↗
7. Cryogenic indentation-induced grain growth in nanotwinned copper10.1016/j.scriptamat.2012.12.026 ↗
8. Size effects on yield strength and strain hardening for ultra-thin Cu films with and without passivation: a study by synchrotron and bulge test techniques10.1016/j.actamat.2008.01.027 ↗
9. Mechanical properties of nanocrystalline materials10.1016/j.pmatsci.2005.08.003 ↗
10. Toward a quantitative understanding of mechanical behavior of nanocrystalline metals10.1016/j.actamat.2007.01.038 ↗
11. A comparison of grain boundary evolution during grain growth in fcc metals10.1016/j.actamat.2013.02.057 ↗
12. Rapid stress-driven grain coarsening in nanocrystalline Cu at ambient and cryogenic temperatures
13. Twinning/detwinning-mediated grain growth and mechanical properties of free-standing nanotwinned Ni foils: grain size and strain rate effects10.1016/j.msea.2015.01.015 ↗
14. Experimental observations of stress-driven grain boundary migration10.1126/science.1178226 ↗
15. In situ TEM observations of fast grain-boundary motion in stressed nanocrystalline aluminum films10.1016/j.actamat.2008.03.032 ↗
16. Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility10.1038/nmat3544 ↗
17. Microstructural evolution, mechanical properties and deformation mechanisms of nanocrystalline Cu thin films alloyed with Zr10.1016/j.actamat.2014.04.041 ↗
18. Atomistic simulation of grain boundary energetics – effects of dopants10.1016/j.actamat.2005.04.031 ↗
19. Stabilizing nanocrystalline materials with dopants10.1016/j.actamat.2006.11.028 ↗
20. Grain boundary segregation engineering in metallic alloys: a pathway to the design of interfaces10.1016/j.cossms.2014.06.002 ↗
21. Grain coarsening inhibited by solute segregation10.1016/S1359-6454(01)00338-X ↗
22. Nano-scale grain growth inhibited by reducing grain boundary energy through solute segregation10.1016/j.jcrysgro.2003.12.021 ↗
23. Reducing grain boundary, dislocation line and vacancy formation energies by solute segregation : II. Experimental evidence and consequences10.1016/j.actamat.2007.05.033 ↗
24. Design of stable nanocrystalline alloys10.1126/science.1224737 ↗
25. Stability of binary nanocrystalline alloys against grain growth and phase separation10.1016/j.actamat.2012.12.033 ↗
26. Nanoscale segregation behavior and high-temperature stability of nanocrystalline W–20at.% Ti10.1016/j.actamat.2014.03.039 ↗
27. Molecular dynamics simulations of grain size stabilization in nanocrystalline materials by addition of dopants10.1016/j.actamat.2005.07.024 ↗
28. Grain boundary segregation, solute drag and abnormal grain growth10.1016/j.actamat.2008.04.007 ↗
29. Reducing grain boundary, dislocation line and vacancy formation energies by solute segregation. I. Theoretical background10.1016/j.actamat.2007.05.047 ↗
30. Segregation and clustering of solutes at grain boundaries in Mg–rare earth solid solutions10.1016/j.actamat.2014.06.004 ↗
31. Grain boundary segregation in binary nickel–bismuth alloy10.1016/j.actamat.2015.11.003 ↗
32. Drag effect of triple junctions on grain boundary and grain growth kinetics in aluminium10.1016/j.actamat.2005.01.016 ↗
33. Thermal stability of electrodeposited nanocrystalline Co-1.1at.%P10.1016/j.actamat.2005.06.006 ↗
34. Enhanced solid solution effects on the strength of nanocrystalline alloys10.1016/j.actamat.2010.11.026 ↗
35. Cluster strengthening in aluminium alloys10.1016/j.scriptamat.2014.04.018 ↗
36. Stabilization and strengthening of nanocrystalline copper by alloying with tantalum10.1016/j.actamat.2012.01.011 ↗
37. Solute segregation transition and drag force on grain boundaries10.1016/S1359-6454(03)00184-8 ↗
38. Ab initio study of the effect of solute atoms on the stacking fault energy in aluminum10.1103/PhysRevB.75.224105 ↗
39. Combined effect of texture and nanotwins on mechanical properties of the nanostructured Cu and Cu–Al films prepared by magnetron sputtering
40. Influence of twin thickness and grain size on the tensile behavior of fully nanotwinned CuAl Alloys10.1002/adem.201500496 ↗
41. Nano-sized twins induce high rate sensitivity of flow stress in pure copper10.1016/j.actamat.2005.01.031 ↗
42. Amorphous intergranular films as toughening structural features10.1016/j.actamat.2015.02.012 ↗
43. Ductile crystalline-amorphous nanolaminates10.1073/pnas.0702344104 ↗
44. Transition from homogeneous-like to shear-band deformation in nanolayered crystalline Cu/amorphous Cu–Zr micropillars: intrinsic vs. extrinsic size effect10.1016/j.actamat.2012.09.027 ↗
45. Double-inverse grain size dependence of deformation twinning in nanocrystalline Cu10.1103/PhysRevB.81.172104 ↗
46. Effects of the substrate on the determination of thin film mechanical properties by nanoindentation10.1016/S1359-6454(01)00328-7 ↗
47. Experimental characterization of shear transformation zones for plastic flow of bulk metallic glasses10.1073/pnas.0806051105 ↗
48. Assessment of decomposition products in an Al–Mg–Si alloy by instrumented micro-indentation10.1016/S0921-5093(01)01093-0 ↗
49. Dislocation-defect analysis during micro-indentation using displacement rate changes10.1016/S0921-5093(97)00317-1 ↗
50. Correlation between plasticity and other materials properties of Cu–Zr bulk metallic glasses: an atomistic simulation study10.1016/j.actamat.2010.10.027 ↗
51. Bulk metallic glass formation in binary Cu-rich alloy seriesCu100Zrx (x= 34, 36, 38.2, 40 at%) and mechanical properties of bulk Cu64Zr36 glass10.1016/j.actamat.2004.02.009 ↗
52. Thermal stability of nanocrystalline Fe–Zr alloys10.1016/j.msea.2010.02.043 ↗
53. Thermodynamic stabilization of nanocrystallinity
54. Effect of interfacial solute segregation on ductile fracture of Al–Cu–Sc alloys10.1016/j.actamat.2012.11.043 ↗
55. Simultaneous segregation at coherent and semicoherent heterophase interfaces10.1103/PhysRevLett.105.076102 ↗
56. Alloy effects in nanostructures10.1016/0965-9773(93)90088-S ↗
57. The stabilization of nanocrystalline copper by zirconium10.1016/j.msea.2012.08.092 ↗
58. Cu-Zr (copper-zirconium)
59. Property improvement of Cu–Zr alloy films with ruthenium addition for Cu metallization10.1016/j.actamat.2010.09.053 ↗
60. Microstructural evolution in a Cu–Zr alloy processed by a combination of ECAP and HPT10.1016/j.msea.2013.05.010 ↗
61. Reaching theoretical strengths in nanocrystalline Cu by grain boundary doping10.1016/j.scriptamat.2011.06.048 ↗
62. Anisotropy of segregation at grain boundaries and surfaces10.1007/BF02586096 ↗
63. Segregation at grain boundaries
64. Surface energy and solute strain energy effects in surface segregation10.1016/0039-6028(77)90462-9 ↗
65. Electronic structure of primary solid solutions in metals10.1080/00018735400101233 ↗
66. Grain-boundary energies in gold-copper alloys10.1016/0001-6160(60)90136-X ↗
67. Hahn · 1967
68. Stranski–Krastanov growth of Sn on a polycrystalline Al film surface initiated by the wetting of Al by Sn10.1016/S0039-6028(01)01174-8 ↗
69. The effect of chromium dopant on the microstructure and mechanical properties of sputter-deposited copper films10.1016/j.surfcoat.2009.03.018 ↗
70. Fundamental structure forming phenomena of polycrystalline films and the structure zone models10.1016/S0040-6090(97)00503-8 ↗
71. Microstructural evolution during film growth10.1116/1.1601610 ↗
72. Enhanced hardening in Cu/330 stainless steel multilayers by nanoscale twinning10.1016/j.actamat.2003.10.033 ↗
73. Hirth · 1992
74. Murr · 1975 · 103
75. Segregation-induced changes in grain boundary cohesion and embrittlement in binary alloys10.1016/j.actamat.2015.05.004 ↗
76. Size- and constituent-dependent deformation mechanisms and strain rate sensitivity in nanolaminated crystalline Cu/amorphous Cu–Zr films10.1016/j.actamat.2015.05.007 ↗
77. Manipulating the interfacial structure of nanomaterials to achieve a unique combination of strength and ductility10.1038/ncomms10802 ↗
78. Limits of hardness at the nanoscale: molecular dynamics simulations10.1103/PhysRevB.78.241402 ↗
79. Enhanced strength in high conductivity copper alloys10.1016/0025-5416(88)90226-1 ↗
80. Grain size dependence of tensile properties in ultrafine-grained Cu with nanoscale twins10.1016/j.scriptamat.2010.10.015 ↗
81. Transition of dislocation nucleation induced by local stress concentration in nanotwinned copper10.1038/ncomms8648 ↗
82. Strain hardening and softening in nanotwinned Cu10.1016/j.scriptamat.2013.02.051 ↗
83. Dislocation nucleation governed softening and maximum strength in nano-twinned metals10.1038/nature08929 ↗
84. Grain-size-dependent zero-strain mechanism for twinning in copper
85. Deformation twinning in nanocrystalline aluminum10.1126/science.1083727 ↗
86. Crystallization-aided extraordinary plastic deformation in nanolayered crystalline Cu/amorphous Cu-Zr micropillars10.1038/srep02324 ↗
87. Shear-induced mixing governs codeformation of crystalline-amorphous nanolaminates10.1103/PhysRevLett.113.035501 ↗
88. Tensile properties of in situ consolidated nanocrystalline Cu10.1016/j.actamat.2004.12.005 ↗
89. Critical grain size for dislocation storage and consequences for strain hardening of nanocrystalline materials10.1016/j.scriptamat.2010.05.006 ↗
90. Some observations of grain boundary ledges and ledges as dislocation sources in metals and alloys10.1007/BF02658408 ↗
91. What is behind the inverse Hall–Petch effect in nanocrystalline materials?10.1016/j.actamat.2007.02.021 ↗
92. Emergence of strain-rate sensitivity in Cu nanopillars: transition from dislocation multiplication to dislocation nucleation10.1016/j.actamat.2011.05.038 ↗