The importance of fracture toughness evaluation for additively manufactured metals
Source abstract
Abstract
Yield strength and fracture toughness are key properties of structural materials used by designers for engineering applications, whereas secondary properties like ductility are not generally used in quantitative design calculations. However, since ductility is usually measured along with strength in the same tensile test, it is often used as an indication of the fracture toughness even though these properties are usually not directly proportional. As a result, many researchers initially, and only, screen new materials and processing routes for good combinations of strength and ductility (which can be assessed from the same tensile test) rather than evaluating fracture toughness independently. This can result in poorly informed decisions being made early in the development stages for structural applications where materials with combinations of high strength and good fracture toughness are required. In this article, we evaluate the correlation between fracture toughness and ductility of Al-, Fe-, and Ti-based alloys that were processed using conventional methods as well as by additive manufacturing (AM) routes. We highlight that the correlation between fracture toughness and ductility is very weak, which in the case of AM materials is attributed to their often-metastable microstructures, their layer-by layer mesostructures, and their anisotropic failure characteristics that lead to pronounced variability in the fracture toughness data for materials with similar ductility. Our findings suggest that an independent assessment of fracture toughness alongside the tensile properties (strength and ductility) is required to correctly optimize the AM processing of structural materials and provide engineers with the properties required for the design of parts and components for structural and safety-critical applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (70)
Show source-provided references
1. The conflicts between strength and toughness10.1038/nmat3115 ↗
2. Alloy design strategies to increase strength and its trade-offs together10.1016/j.pmatsci.2020.100720 ↗
3. Towards strength–ductility synergy through the design of heterogeneous nanostructures in metals10.1016/j.mattod.2017.02.003 ↗
4. Fracture resistance of advanced high-strength steel sheets for automotive applications10.1007/s11661-020-06119-y ↗
5. Characterization and control of the compromise between tensile properties and fracture toughness in a quenched and partitioned steel10.1007/s11661-019-05265-2 ↗
6. The fracture toughness of TRIP-assisted multiphase steels10.1016/j.actamat.2008.04.035 ↗
7. Bulk metallic glasses as structural materials: a review10.1002/adem.201600066 ↗
8. Metal additive manufacturing: a review of mechanical properties10.1146/annurev-matsci-070115-032024 ↗
9. Metal additive manufacturing: a review10.1007/s11665-014-0958-z ↗
10. Additive manufacturing of metals10.1016/j.actamat.2016.07.019 ↗
11. Additively manufactured hierarchical stainless steels with high strength and ductility10.1038/nmat5021 ↗
12. Steels in additive manufacturing: a review of their microstructure and properties10.1016/j.msea.2019.138633 ↗
13. Microstructural optimization through heat treatment for enhancing the fracture toughness and fatigue crack growth resistance of selective laser melted Ti–6Al–4V alloy10.1016/j.actamat.2019.03.003 ↗
14. Micro-and meso-structures and their influence on mechanical properties of selectively laser melted Ti-6Al-4V10.1016/j.actamat.2018.05.044 ↗
15. Tensile, fracture, and fatigue crack growth properties of a 3D printed maraging steel through selective laser melting10.1016/j.jallcom.2017.07.177 ↗
16. Fracture resistance of AlSi10Mg fabricated by laser powder bed fusion10.1016/j.actamat.2021.116869 ↗
17. Machine-learning assisted laser powder bed fusion process optimization for AlSi10Mg: New microstructure description indices and fracture mechanisms10.1016/j.actamat.2020.10.010 ↗
18. Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting10.1016/j.actamat.2016.06.009 ↗
19. ASTM Standard E399, Standard test method for linear-elastic plane-strain fracture toughness KIc of metallic materials, 2022. https://doi.org/10.1520/E0399-22.10.1520/E0399-22 ↗
20. ASTM Standard E1820, Standard Test Method for Measurement of Fracture Toughness, 2018. https://doi.org/10.1520/E1820-18.10.1520/E1820-18 ↗
21. Effect of build orientation on fracture and tensile behavior of A357 Al alloy processed by selective laser melting10.1016/j.msea.2019.138392 ↗
22. A hypoeutectic Al-Ni-Mg in situ composite processed by wire-arc additive manufacturing: Phase evolution and mechanical behavior10.1016/j.matdes.2022.111066 ↗
23. Effect of heat treatments and loading orientation on the tensile properties and fracture toughness of AlSi7Mg alloy produced by Laser Powder Bed Fusion10.1007/s10704-022-00631-5 ↗
24. Strength and fracture resistance of in-situ alloyed compositionally-graded Al-Si processed by dual-wire arc directed energy deposition
25. Kaufman · 2004
26. Analysis of fracture toughness properties of wire + arc additive manufactured high strength low alloy structural steel components10.1016/j.msea.2019.138285 ↗
27. Plane-strain fracture toughness of thin additively manufactured maraging steel samples
28. An investigation on the plane-strain fracture toughness of a water atomized 4130 low-alloy steel processed by laser powder bed fusion10.1016/j.msea.2022.143941 ↗
29. Microstructure, mechanical properties and fracture toughness of SS 321 stainless steel manufactured using wire arc additive manufacturing10.1007/s12666-022-02713-3 ↗
30. Effect of heat treatment on the strength and fracture resistance of a laser powder bed fusion-processed 18Ni-300 maraging steel10.1016/j.msea.2022.143167 ↗
31. Effect of heat treatment on the microstructure and mechanical properties of 2.4 GPa grade maraging steel fabricated by laser powder bed fusion
32. Process evaluation of AISI 4340 steel manufactured by laser powder bed fusion10.1007/s11665-017-2989-8 ↗
33. The quantitative relationship between fracture toughness and impact toughness in high-strength steels10.1016/j.engfracmech.2019.03.003 ↗
34. The increase of fracture toughness with solution annealing temperature in 18Ni Maraging 300 steel10.1590/1980-5373-mr-2020-0472 ↗
35. Superior fracture toughness in a high-strength austenitic steel with heterogeneous lamellar microstructure10.1016/j.actamat.2022.117642 ↗
36. The relationship between fracture toughness and tensile property in high-strength steels10.1016/j.engfailanal.2021.105854 ↗
37. Correlation between fracture toughness and stretch-flangeability of advanced high strength steels10.1016/j.matlet.2016.05.145 ↗
38. Near-Threshold fatigue crack propagation in ultra-high strength steel: influence of load ratio and cyclic strength10.1115/1.3443519 ↗
39. Fracture behavior of heterogeneous nanostructured 316L austenitic stainless steel with nanotwin bundles10.1016/j.actamat.2018.02.065 ↗
40. Fracture toughness of a high carbon and high silicon steel10.1016/S0921-5093(00)01272-7 ↗
41. Investigation on the cracking resistances of different ageing treated 18Ni maraging steels10.1016/j.msea.2019.138553 ↗
42. Influence of cold sprayed Cr3C2-Ni coating on fracture characteristics of additively manufactured 15Cr-5Ni stainless steel10.1016/j.matdes.2018.05.063 ↗
43. Crack propagation and fracture toughness of Ti6Al4V alloy produced by selective laser melting
44. Microstructure and mechanical properties of direct metal laser sintered Ti-6Al-4V
45. Fatigue performance of additive manufactured TiAl6V4 using electron and laser beam melting10.1016/j.ijfatigue.2016.05.001 ↗
46. Fracture toughness of Ti-6Al-4V after welding and postweld heat treatment
47. Microstructural effects on the mechanical behavior of B-modified Ti–6Al–4V alloys10.1016/j.actamat.2007.05.009 ↗
48. The role of microstructure inhomogeneity in Ti-6Al-4V forging on fracture toughness behavior10.1007/s11665-022-06862-w ↗
49. The influence of crystallographic orientation on the fracture toughness of strongly textured Ti-6Al-4V10.1016/0001-6160(78)90157-8 ↗
50. Recent progress on the additive manufacturing of aluminum alloys and aluminum matrix composites: Microstructure, properties, and applications10.1016/j.ijmachtools.2023.104047 ↗
51. Aging response of an A357 Al Alloy processed by selective laser melting10.1002/adem.201800406 ↗
52. Parametric analysis of thermal behavior during selective laser melting additive manufacturing of aluminum alloy powder10.1016/j.matdes.2014.07.006 ↗
53. Recent development in aluminium alloys for the automotive industry10.1016/S0921-5093(99)00653-X ↗
54. Identification of fracture toughness parameters to understand the fracture resistance of advanced high strength sheet steels10.1016/j.engfracmech.2020.106949 ↗
55. About metastable cellular structure in additively manufactured austenitic stainless steels
56. Dislocation network in additive manufactured steel breaks strength–ductility trade-off10.1016/j.mattod.2017.11.004 ↗
57. Revealing relationships between microstructure and hardening nature of additively manufactured 316L stainless steel10.1016/j.matdes.2020.109385 ↗
58. Tailoring the nanostructure of laser powder bed fusion additively manufactured maraging steel
59. Effect of thermal cycling and aging stages on the microstructure and bending strength of a selective laser melted 300-grade maraging steel10.1016/j.msea.2019.03.129 ↗
60. Analysis of fracture toughness and crack propagation of Ti6Al4V produced by selective laser melting10.1002/adem.201100233 ↗
61. Additive manufacturing of Ti6Al4V alloy: a review10.1016/j.matdes.2018.107552 ↗
62. On the relationship between critical tensile stress and fracture toughness in mild steel10.1016/0022-5096(73)90008-2 ↗
63. A critical review on additive manufacturing of Ti-6Al-4V alloy: microstructure and mechanical properties10.1016/j.jmrt.2022.04.055 ↗
64. Fracture and fatigue in additively manufactured metals10.1016/j.actamat.2021.117240 ↗
65. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
66. Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures10.1038/ncomms10602 ↗
67. Exceptional fracture toughness of CrCoNi-based medium- and high-entropy alloys at 20 kelvin10.1126/science.abp8070 ↗
68. Kink bands promote exceptional fracture resistance in a NbTaTiHf refractory medium-entropy alloy10.1126/science.adn2428 ↗
69. A novel deformation mechanism in Ti-V binary metastable β-Ti alloys: Deformation kinking promoted by dislocation accumulation10.1016/j.jallcom.2021.159982 ↗
70. 2010 · 1