Deformation twinning during high temperature compression tests of the Ni-base superalloy ATI 718Plus®
Source abstract
Abstract
This study discusses the deformation mechanisms active during high temperature compression tests of the Ni-base superalloy ATI 718Plus®. Deformation twins were observed in deformed grains across a range of temperatures and strain rates by use of transmission electron microscopes (TEM). Even at strain rates as low as 0.01 s − 1 and temperatures up to 1025∘C the microstructure contained of grains which deformed by deformation twinning. It was concluded that the low stacking fault energy of the alloy, which was measured to be 15mJm − 2 caused the formation of the deformation twins. In addition, several examples of the early stages of twin formation were captured. The twinning partials were in most cases emitted from grain boundaries. In a second instance cross-slip events from a Frank-Read source lead to the formation of partials which formed stacking faults.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Metallurgy and Material Forming · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Twinning-induced plasticity (twip) steels10.1016/j.actamat.2017.06.046 ↗
2. Deformation twinning behavior in high ni-Austenitic materials10.4028/www.scientific.net/MSF.941.1591 ↗
3. Formation of deformatin twins in f.c.c. crystals10.1016/0001-6160(73)90085-0 ↗
4. Influence of deformation and annealing twinning on the microstructure and texture evolution of face-centered cubic high-entropy alloys10.1016/j.actamat.2018.02.048 ↗
5. Zhang · 2016
6. Creep deformation mechanism mapping in nickel base disk superalloys10.1080/09603409.2016.1180858 ↗
7. Deformation and damage mechanisms during thermal-mechanical fatigue of a single-crystal superalloy10.1016/j.actamat.2009.01.027 ↗
8. A comparative study on thermomechanical and low cycle fatigue failures of a single crystal nickel-based superalloy10.1016/j.ijfatigue.2011.07.009 ↗
9. Hot deformation characterization of nickel-based superalloy UNS10276 through processing map and microstructural studies10.1016/j.jallcom.2016.10.029 ↗
10. A study on the effect of strain rate on the dynamic recrystallization mechanism of alloy 617b10.1007/s11661-016-3664-7 ↗
11. Microstructure evolution and mechanical behavior of a new microalloyed high mn austenitic steel during compressive deformation10.1016/j.msea.2014.07.084 ↗
12. Longitudinal twinning in a tial alloy at high temperature by in situ microcompression10.1016/j.actamat.2018.01.007 ↗
13. Formation of deformation twins in metallic crystals
14. Critique of mechanisms of formation of deformation, annealing and growth twins: face-centered cubic metals and alloys10.1016/j.scriptamat.2012.09.011 ↗
15. Growth twins and deformation twins in metals10.1146/annurev-matsci-070813-113304 ↗
16. Löhnert · 2011
17. Recommendations for Heat Treating Allvac® 718Plus® Alloy Parts
18. Morphology and kinetics of grain boundary precipitation in alloy ATI 718Plus®
19. Characterization of the initial stages of dynamic recrystallization in ATI 718plus®
20. Developments in wrought nb containing superalloys (718 + 100∘f)
21. Experimental determination of TTT diagram for alloy 718plus®
22. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
23. Influence of processing parameters on dynamic recrystallization and the associated annealing twin boundary evolution in a nickel base superalloy10.1016/j.msea.2017.05.109 ↗
24. On the creep behavior at 1033k of new generation single-crystal superalloys10.1016/S0921-5093(04)00925-6 ↗
25. Development of γ phase stacking faults during high temperature creep of ru-containing single crystal superalloys10.1016/j.actamat.2007.06.042 ↗
26. Creep mechanisms of u720li disc superalloy at intermediate temperature10.1016/j.msea.2011.03.034 ↗
27. Hull · 2011
28. ATI Allvac · 2008
29. On the precipitation of delta phase in ALLVAC® 718plus10.1080/14786435.2013.878052 ↗
30. On the mechanism of twin formation in fe-mn-c twip steels10.1016/j.actamat.2009.12.032 ↗
31. Three dimensional reconstruction of planar deformation features from single electron micrographs
32. Reed · 2006
33. Microtwinning and other shearing mechanisms at intermediate temperatures in ni-based superalloys10.1016/j.pmatsci.2009.03.010 ↗
34. The high temperature decrease of the critical resolved shear stress in nickel-base superalloys10.1016/S0921-5093(01)00944-3 ↗
35. Temperature dependence of the stacking-fault gibbs energy for al, cu, and ni
36. Effects of alloying elements and temperature on the elastic properties of dilute Ni-base superalloys from first-principles calculations10.1063/1.4749406 ↗
37. Temperature dependence of stacking fault energy in close-packed metals and alloys10.1016/0025-5416(78)90194-5 ↗
38. Formation of annealing twins in f.c.c. crystals
39. Segregation and phase transformations along superlattice intrinsic stacking faults in ni-Based superalloys
40. Segregation and η phase formation along stacking faults during creep at intermediate temperatures in a Ni-based superalloy10.1016/j.actamat.2015.08.053 ↗
41. Deformation twinning in nanocrystalline metals10.1361/105994905X56269 ↗
42. Deformation twinning in face-centred cubic metals10.1080/14786436108235892 ↗
43. The high temperature decrease of the critical resolved shear stress in nickel-base superalloys
44. The formation of immobile dislocations during slip10.1080/14786440608520220 ↗
45. A dislocation model for twinning in f.c.c. metals10.1016/0001-6160(63)90074-9 ↗
46. Dislocation reactions during deformation twinning in cu-11at.% al single crystals10.1016/0001-6160(80)90154-6 ↗