journal article·2023-08

Formation of core-shell-like structure in β-solidified TiAl alloy and its effect on hot workability

Yonghao Yu, Hongchao Kou, Yichao Wang, Mengyu Jia, Xiaoxuan Xu, Zilong Zhang, Yarong Wang, Jinshan Li

Acta Materialia· Volume 255
Publisher page

Abstract

Understanding how phase evolves from its parent phase is critical to control the transforming microstructures and thus material performance. TiAl alloys exhibit lightweight and excellent elevated temperature properties, making them suitable for high-temperature applications. However, it is difficult to further improve the microstructure and properties of TiAl alloys through hot working, as the lamellar colonies in the original microstructure cannot be completely broken up. These remnant colonies are hard to eliminate and their presence reduces the microstructural homogeneity and properties of the alloys. Here, we propose a method for complete fragmentation of the lamellar structure in the β-solidified TiAl alloys by introducing a core-shell-like structure before hot working. The core-shell-like structure with a (α 2+γ) lamellar colony in the core and an α 2 matrix in the shell is obtained. The lamellar decomposition dominated by non-classical L1 0 (γ) to hcp (α) phase transformation is essential to ensure the formation of the core-shell-like structure, while the effects of factors such as defects and β 0 grains are also further discussed in the thesis. In addition, the core-shell-like structure obtained in the β-solidified TiAl alloys before hot working can enhance the hot workability.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced materials and composites · Quasicrystal Structures and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. Porter · 2009
2. Banerjee · 2007
3. Atomic-scale observation of non-classical nucleation-mediated phase transformation in a titanium alloy10.1038/s41563-021-01144-7 ↗
4. Observable two-step nucleation mechanism in solid-state formation of tungsten carbide10.1021/acsnano.8b07864 ↗
5. Prenucleation clusters and non-classical nucleation10.1016/j.nantod.2011.10.005 ↗
6. Kinetic pathways of crystallization at the nanoscale10.1038/s41563-019-0514-1 ↗
7. Nonclassical nucleation and growth of inorganic nanoparticles10.1038/natrevmats.2016.34 ↗
8. Nucleation from Solution10.1126/science.1243022 ↗
9. In situ imaging of silicalite-1 surface growth reveals the mechanism of crystallization10.1126/science.1250984 ↗
10. Alloy design for aircraft engines10.1038/nmat4709 ↗
11. Aircraft gas turbine materials and processes10.1126/science.208.4446.847 ↗
12. Ductile ordered intermetallic alloys10.1126/science.226.4675.636 ↗
13. Polysynthetic twinned TiAl single crystals for high-temperature applications10.1038/nmat4677 ↗
14. Single-crystal performance boost10.1038/nmat4712 ↗
15. Advances in gammalloy materials–processes–application technology: successes, dilemmas, and future10.1007/s11837-018-2747-x ↗
16. Microstructure and deformation of two-phase γ-titanium aluminides10.1016/S0927-796X(97)00018-1 ↗
17. Phase transformations in γ based titanium aluminides10.1179/095066000101528377 ↗
18. Microstructure control of Ti45Al8.5Nb(W, B, Y) alloy during the solidification process10.1016/j.actamat.2016.04.021 ↗
19. Microsegregation in high Nb containing TiAl alloy ingots beyond laboratory scale10.1016/j.intermet.2006.10.003 ↗
20. Inhomogeneous microstructure in highly alloyed cast TiAl-based alloys, caused by microsegregation10.1016/j.scriptamat.2005.01.024 ↗
21. Refinement of lamellar structures in Ti-Al alloy10.1016/j.actamat.2016.11.045 ↗
22. Rapid decomposition of lamellar microstructure and enhanced hot workability of an as-cast triphase Ti–45Al–6Nb–1Mo alloy via one-step alpha-extrusion & annealing10.1016/j.msea.2020.140438 ↗
23. Hot-working behavior of an advanced intermetallic multi-phase γ-TiAl based alloy10.1016/j.msea.2014.07.040 ↗
24. A newly developed hot worked TiAl alloy for blades and structural components10.1016/S1359-6462(02)00158-6 ↗
25. Recovery, recrystallization and phase transformations during thermomechanical processing and treatment of TiAl-based alloys10.1016/S1359-6454(00)00093-8 ↗
26. Microstructure and tensile properties of hot fogred high Nb containing TiAl based alloy with initial near lamellar microstructure10.1016/j.msea.2015.06.066 ↗
27. Deformation behavior of high Nb containing TiAl based alloy in α+γ two phase field region10.1016/j.matdes.2015.10.080 ↗
28. Effect of hot rolling and primary annealing on the microstructure and texture of a β-stabilised γ-TiAl based alloy10.1016/j.actamat.2016.12.056 ↗
29. An investigation on microstructural and mechanical properties of powder metallurgical TiAl alloy during hot pack-rolling10.1016/j.msea.2014.09.091 ↗
30. Microstructural evolution during hot working of ti aluminide alloys: influence of phase constitution and initial casting texture10.1007/s11661-005-1015-1 ↗
31. High temperature compressive flow behavior and associated microstructural development in a β-stabilized high Nb-containing γ-TiAl based alloy10.1016/j.jallcom.2019.02.207 ↗
32. Low-temperature superplasticity of forged Ti–43Al–4Nb–2Mo–0.5B alloy10.1016/j.jallcom.2012.07.127 ↗
33. Phase transformation and dynamic recrystallization behavior of a β-solidifying γ-TiAl alloy and its wrought microstructure control10.1016/j.matdes.2015.10.133 ↗
34. Microstructure and mechanical properties of a forged β-solidifying γ TiAl alloy in different heat treatment conditions10.1016/j.intermet.2014.11.008 ↗
35. A novel hot pack rolling of high Nb–TiAl sheet from cast ingot10.1016/j.intermet.2015.07.009 ↗
36. Grain fragmentation associated continuous dynamic recrystallization (CDRX) of hexagonal structure during uniaxial isothermal compression: high-temperature α phase in TiAl alloys10.1016/j.intermet.2020.107028 ↗
37. Thermally-induced α→β phase transformation interweaving with abnormal α grain growth in hot extruded TNM alloy10.1016/j.jmrt.2021.09.056 ↗
38. Microstructure development and hardness of a powder metallurgical multi phase γ-TiAl based alloy10.1016/j.intermet.2011.11.015 ↗
39. Microstructural design and mechanical properties of a cast and heat-treated intermetallic multi-phase γ-TiAl based alloy10.1016/j.intermet.2013.09.010 ↗
40. Phase transformation mechanisms involved in two-phase TiAl-based alloys—I. Lambellar structure formation10.1016/1359-6454(95)00167-4 ↗
41. A quantitative TEM analysis of the lamellar microstructure in TiAl based alloys10.1016/S1359-6454(96)00398-9 ↗
42. Phase transformations in TiAl based alloys10.1016/j.actamat.2005.02.025 ↗
43. Sir Peter Hirsch · 1977 · 351
44. High-resolution image simulation of overlap structures in TiAl alloy10.1016/j.jallcom.2008.01.027 ↗
45. Formation of lamellar microstructure in Ti-48Al-7Nb-2.5V-1Cr alloy10.1016/j.matdes.2022.111342 ↗
46. Interfacial dislocation mechanism for diffusional phase transformations exhibiting martensitic crystallography: formation of TiAl + Ti3Al lamellae10.1016/S1359-6454(99)00416-4 ↗
47. Nucleation of the lamellar decomposition in a Ti–44Al–4Nb–4Zr alloy10.1016/j.actamat.2003.09.005 ↗
48. Deformation behaviour and 6H-LPSO structure formation at nanoindentation in lamellar high Nb containing TiAl alloy10.1080/09500839.2015.1009515 ↗
49. Unusual ordered phases with long periodic stacking structures in an additively manufactured TiAl alloy10.1080/21663831.2020.1804473 ↗
50. Atypical pathways for lamellar and twinning transformations in rapidly solidified TiAl alloy10.1016/j.actamat.2022.117718 ↗
51. The investigation of microstructure evolution, deformation behavior and processing performance of the high niobium containing TiAl alloys10.1016/j.intermet.2021.107336 ↗
52. Hot deformation behavior of β phase containing γ-TiAl alloy10.1016/j.msea.2016.03.005 ↗
53. Hot deformation behavior and microstructural evolution of as-forged Ti-44Al-8Nb-(W, B, Y) alloy with nearly lamellar microstructure10.1016/j.intermet.2017.02.026 ↗
54. Discontinuous yielding and microstructural evolution of Ti-40 at.% Al alloy compressed in single α-hcp phase region10.1016/j.jallcom.2016.10.080 ↗
55. High temperature discontinuous yielding in a new near β titanium alloy Ti-733310.1016/S1875-5372(14)60089-8 ↗
56. Hot deformation behavior originated from dislocation activity and β to α phase transformation in a metastable β titanium alloy10.1016/j.ijplas.2019.03.011 ↗
57. Deformation behavior and microstructure evolution during hot working of a coarse-grained Ti-5Al-5Mo-5V-3Cr-1Zr titanium alloy in beta phase field10.1016/j.msea.2017.03.095 ↗
58. On the origin of the improvement of shape memory effect by precipitating VC in Fe–Mn–Si-based shape memory alloys10.1016/j.actamat.2018.06.008 ↗
59. Mechanism of stress- and thermal-induced fct → hcp → fcc crystal structure change in a TiAl-based alloy compressed at elevated temperature10.1016/j.msea.2022.143011 ↗
60. The mechanism of formation of nanostructure and dissolution of cementite in a pearlitic steel during high pressure torsion10.1016/S1359-6454(03)00419-1 ↗
61. Cementite dissolution in heavily cold drawn pearlitic steel wires10.1016/S1359-6454(96)00216-9 ↗
62. Cementite decomposition in heavily drawn pearlite steel wire10.1016/S1359-6462(00)00690-4 ↗
63. Mean stresses in microstructures due to interface stresses: a generalization of a capillary equation for solids10.1016/S1359-6454(96)00314-X ↗
64. Mechanically driven alloying of immiscible elements10.1103/PhysRevLett.68.2235 ↗